WIPCOOL R2 User manual

OPERATION MANUAL
feeling for more
R2
OIL CHARGING PUMP
With Pressure Oil Charging ,
Reliable And Durable

feeling for more
1）Take out the pump and oil transfer tube from the packing, connect one side of
the charging tube to the pump and tighten the fitting.
2）Put the oil transfer tube into the oil tank, please ensure that the copper pipe
contacts the bottom of the oil tank,and fix the oil transfer tube and the pump
connector with a wrench after adjusting the position.
3）Attach another side of the charging tube to the system and release the air
form hose then tighten the fitting at the system.
4）Open the valve of the compressor and fill the compressor with refrigerant oil
slowly and evenly. Press the oil pump to the bottom every time you push it. In
order to prevent the oil pump from moving or spinning during the oil charging
process, please step on the foot of the oil pump base with feet so as to exert
more force.
5）After charging, please remove the oil transfer tube from the system and close
the valve.
Operating Steps
Refrigerant Oil
OIL CHARGING PUMP
R2
Refrigerant Oil
COMPRESSOR
120mm
550mm 450mm
DIMENSIONS: INSTRUCTIONS: