WIS NETWORKS WIS-WM2300 User manual

Models: WIS-WM2300/WIS-WM2310
Version: 1.1
Wireless In-wall Access Point

Interface
No. Interface Instruction
6
5
7 8
14 23
9 1 0
1
2
3
4
5
6
7
8
9
10
WAN
RJ11 Phone
Power LED
WLAN LED
LAN LED
For RJ11
For RJ45
RJ45 Ethernet
RJ45 Ethernet
Reset
48V PoE port
T-Strip
T-Strip

Installation
Screw driver
- You may need tools below.
Cable pliersCable knife
Open the cover of the access point.
2
Instructions before installing
Install the device
1
Connect the Ethernet cable to the 8pin terminal strip
with the order below (from top to bottom)
2
White/Orange-> Orange-> White/Green-> Blue->
White/Blue-> Green-> White/Brown-> Brown

3
4
3
4
Install the access point in to 86mm wall socket and
tighten with screws.
Put on the cover back and finish installation.
You can simply connect to a RJ45 cable to the WAN port
of the device instead of connecting with the terminal strips.

Power up
3
To computer or
to network
To the device
POE
LAN
The device
802.3af PoE Switch
Up to 400 feets
Power+Data
Power up with 48VDC PoE switch
Power up with 48VDC PoE adapter

Configuration
4
1. Check all wires are correctly connected.
2. Configure the host system with static IP on the
192.168.1.x (x could be 10~254) subnet.
3. Using a web browser access 192.168.1.2 (wait a few
seconds after device power up).
4. When login page appears enter “admin” in both the
username and password fields.
5. For more configurations like operating mode and wireless
settings please visit the support
site at wisnetworks.com.

CE Marking
CE marking on this product represents the product is in
compliance with all directives that are applicableto it. Alert
sign must be indicated if a restriction on use applied to the
product and it must follow the CE marking.
RoHS/WEEE Compliance Statement
European Directive 2002/96/EC requires that the equipment bearing this
symbol on the product and/or its packaging must not be disposed of with
unsorted municipal waste. The symbol indicates that this product should
be disposed of separately from regular household waste streams. It is your
responsibility to dispose of this and other electric and electronic equipment
via designated collection facilities appointed by the government or local
authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed
information about the disposal of your old equipment, please contact your
local authorities, waste disposal service, or the shop where you purchased
the product.

Limited Warranty
Wisnetworks warrants that the product(s) furnished hereunder (the “Product(s)”)
shall be free from defects in material and workmanship for a period of two (2)
year from the date of shipment by Wisnetworks under normal use and operation.
The above warranty does not apply if the Product:
(a) has been modified and/or altered, or an addition made thereto, except by
Wisnetworks, or our authorized representatives, or as approved by Wisnetworks;
(b) has been painted, rebranded or physically modified in any way;
(c) has been damaged due to errors or defects in cabling;
(d) has been subjected to misuse, abuse, negligence, abnormal physical,
electromagnetic or electrical stress, including lightning strikes, or accident;
(e) has been damaged or impaired as a result of using third party firmware;
(f) has no original Wisnetworks MAC/SN label, or is missing any other original
Wisnetworks label(s);
(g) human reasons without according to the guide or user manual.
Online Support
For more guide and help, please go to
www.wisnetworks.com/support/
You can contact email
[email protected]
We’ll reply you within one weekday.