Wista WST-ST-1 Series User manual

Suzhou Wista Lighting Technology Co., Ltd.
INSTALLATION GUIDE
IMPORTANT SAFEGUARDS：
1. Read and follow all safety instructions.
2. Lights must be installed by professional electrician.
3. This instruction is for WST-SBL-3 series, 100W, 120W & 150W, as well as WST-ST-1 series, 100W & 150W.
4. Should you have any question, please contact us or local distributors for help.
5. Disconnect power before installation.
TO INSTALL:
Part 1
Part 2

Suzhou Wista Lighting Technology Co., Ltd.
SLIP FITTER MOUNT
STEP1.
Connect AC wire as follows, Then put the bracket on the lamp pole.
STEP2.
Tighten the locking bolts.
STEP3.
Loosen the fixing bolt, adjust fixture to desired angle, and then tighten the fixing bolt.