Wizard-tk ON-FBZT10 User manual

Fingerprint Padlock Institutions
Material: Zinc alloy
Size: 62*28*15mm
Battery: 160mAh
Charging port: 5V 0.5A(Micro USB)
Operation guide:
1. The first and second user will be default as admin user other users
need admin user’s authentication.
2. Any fingerprint could unlock when the fingerprint storage is empty
and it cannot be unlocked by illegal user when fingerprint user is set.
Add admin user:
1. Press the button for 2s
2. The led will be blue and turn to flash in green
3. Then press fingerprint successfully for 10 times the led will be blue if
succeed will be red if not succeed.
4. The registration is finished if the led turns green.
Add common user:

1. Press the button for 2s
2. Press admin fingerprint after the led keeps blue
3. The led revert from blue to flashed green
4. Then press fingerprint successfully for 10 times the led will be blue if
succeed will be red if not succeed.
5. The registration is finished if the led turns green.
Delete all users:
1. Press the button for 5s
2. Press the admin fingerprint when led turn from blue to red
3. All fingerprints deleted if the led is green failed if red
Unlock/lock:
Press admin/common user manually push the lock beam to unlock
Manually release the lock beam or automatically unlock after 2 minutes
Low electricity alarming:
Led will be flashed red for 5 seconds when the power is less than 30%
Charging:
Led is red when charging light goes out when full of charge