Wize WR-22GF Instruction Manual

Screen size : 21.5 inch
Tili angle: 15 degrees
Signal input : HDMI, VGA
Touch function : optional
WR-22GF
Motorized
retractable
monitor
User Manual

1. Listing.Shape and Panel Key Description
1.1 Packing list
No. Name QTY
1 LIFT SYSTEM 1PCS
2 POWER CABLE 1PCS
3 VGA CABLE 1PCS
4 NULLMODEM CABLE 1PCS
5 USER MANUAL 1PCS
1.2 Panel key Functions
No. English Button show
1 STOP
2 UP
3 DOWN
4 PC SW
5 SA SW
1.3 Interface board features(from left to right)
FIG1 surface
1.3.1HDMI Video signal input.

1.3.2DVI Video signal input.
1.3.3VGA Video signal input.
1.3.4Audio signal input(3.5mm stereo)
1.3.5Audio signal output(3.5mm stereo)
1.3.6USB input, up for USB put, down for the touch screen control card
interface
1.3.7RS485 control input(1,2,5)
1.3.8RS485 control input(When cluster control)
1.3.9ANT, Remote control receiver antenna（315MHz）。
1.3.10 Standby button interface: PC SW computer open button. SA SW
signal switching key.
1.3.11 AC220-240V Power input socket
1.4 Control Introduction：
1.4.1RS485 Software Control:9 holes interface with the computer serial port.
232/485 intermediate bridge converter.
FIG2 connector(female）
1.4.2Remote control：（Will be give with goods when customer requested)
FIG3 Remote control can program 6 channel
1.4.3Control Button：（Please see Panel Key function, Red means light
power indicator)
FIG 4 Panel control button

Custom backup keys for customer preparation,the corresponding function is
connected with the interface board.
1.4.4Screen button function：(Pls see the 7 point, screen menu to adjust the
guide)
FIG5 Screen Button
“Menu” menu button
“Auto” Automatic adjustment key
“
▲
”Variable increment key，
“
▲
”Variable reduced key，
“”Screen Power Switch button。
“LED” Power indicator（Red means no have signal, Green means have signal)
2. Features and Major Technical Indicator
2.1 Structure Features
The part of screen Lift is adopt bilateral synchronous belt wheel with linear
optical axis transmission and low noise and stable structure. Screen frame is
adopt pure aluminum with tempered glass front and rear, high-end
atmosphere.

2.2 Major Technical Indicator
2.2.1. LIFT Technical Data
No. Name Date
1 Working Voltage frequency AC220-240V 50/60Hz
2 Consumed power ＜60W
3 single-working time 20S
4 Elevation angle 20°
5 Product weight 25Kg
2.2.2 Product size and packing size
Items Product size Packing size Weight
WR-22GF 738mm*95mm*700mm 860mm*820mm*205mm 25KG

FIG 7 Size of structure figure.
3.2 User installed out-cut size figure.
FIG8 OUT-CUT SIZE
3. Structural dimensions and installation instructions：
3.1 Size of structure figure.

3.3 Installation Notes：
3.3.1Before operation, please remove two "transport fixing screws" on the
cover and clean the inside of the clamshell door foam filler.
3.3.2The lifter embedded inside the opening, panel flush with the desktop.
3.3.3Video Signal connector Cable（VGA or HDMI or DVI）
3.3.4Connect the touch USB Cable(not need to connect the touch USB
cable if without touch function)
3.3.5If need Central-controlled system, please connect the control line
RS485.
3.3.6Connected the antenna with antenna base together
4. Turn on AC220V power supply,panel indicator islight, press UPkey to
complete the automatic elevation, the screen lights up, and angle tilt
becomes fixed 20 degrees.
5. Technical date:
5.1 HEX system controlling code（Sheet 4）
All up FF AC E1 FF 00 00 DD 01 DC
All stop FF AC E1 FF 00 00 CD 01 CC
All down FF AC E1 FF 00 00 ED 01 EC
5.2 Computer software control
5.2.1Download "Multifunctional lifting equipment Control Center" control
software from the company's official website.
5.2.2Prepare a RS232-485 or USB-RS485 protocol converter.
5.2.3 Uses Windows XP systems to install the software.

5.2.4Connect the LIFT equipment.
5.2.5According to the software that comes with help files, you can use to
operate.
6. Solutions of monitor common problems：
Common failure analysis（Sheet 5）
No. Fault phenomenon Analysis reason
5.1 Display is blank ·Power switch is turned off?
·Signal source is interrupted?
5.2 Blurred characters · Is match with the resolution of the
computer?
Contrast and brightness adjustments
are correct？
5.3 Black Screen
·No signal may be turned off
automatically Brightness？
Brightness adjustment if adjust to the
minimum？
·Long press "Auto" key may cause
shutdown, the LED turns red.
7. Solutions of Lifter common problems：
7.1 All machine no power, light does not shine:
Pry the Insurance cover of power to check the fuse if damage? If so,
please change specifications 3.15A fuse.

FIG 9 Location of fuse socket GB
7.2 The control circuit board Common trouble diagnosis method：
FIG10.
Control board
7.2.1 Pls check the power supply socket "L" and "N" (between the circuit
board of the LT3 terminal) resistance is about 1.1K or so, which is
normal, if deviate from this range ,it has the problem.
7.2.2 Indicator light does not shine, the key is invalid, but computer control
normal: may be key board cable transport from strong vibration caused
by poor contact.
7.2.3 Circuit boards 12V abnormal, check L7812 if it's damage.
7.2.4 Circuit boards 5V abnormal, check L7805 if it's damage.
7.2.5 Up limit switch belong pulse level control, after the pulse remains
stopped. But the display power required to maintain the state of shading
for photoelectric control.
7.2.6 Down limit switch belong to low pause control, continued to decline at a
high level. Therefore, photoelectric control gobo stop during descent
should remain light shielding state.