
L Series Oven Quick Start Guide
Oven Operation
For complete information on the operation and maintenance
of your Wolf product, refer to the use & care guide.
CAUTION
Do not place cookware on the oven oor or use
aluminum foil or other material to line the oven oor or
side walls. Failure to adhere to this notice will damage
the porcelain interior and will void your warranty.
To open or close the rotating control panel, press the switch
directly below the control panel. When the electronic control
panel is visible, the oven is operational.
PRIOR TO USE
To ensure all residual oil from the manufacturing process has
been removed, each oven must go through the following
procedure.
1Clean oven thoroughly with hot water and a mild deter-
gent. Rinse and dry with a soft cloth.
2Turn on ventilation. Some smoke and odor is normal.
3Touch CONVECTION ROAST and set temperature to
550°F for one hour.
4Touch OFF and allow oven to cool with the door closed.
SETTING CLOCK
1Touch CLOCK on the control panel.
2Touch number pads to set time of day.
3Touch ENTER.
4To change from a 12- to 24-hour clock, once clock is set,
touch TEMPERATURE for 3 seconds, touch CLOCK, then
touch ENTER.
SETTING TIMER
1Touch TIMER on the control panel.
2Touch number pads to set time in hours and minutes.
3Touch ENTER.
4Oven will chime and time will ash when complete. Timer
will continue to chime until CLEAR is touched.
SETTING OVEN CONTROLS
1Touch OVEN ON. To initiate cooking, touch desired
cooking mode on the control panel. For double ovens,
touch UPPER/LOWER to select desired oven.
2Once the desired cooking mode is selected, a preset tem-
perature will appear on the control panel display. Touch
ENTER to select preset temperature or use number pads
to change temperature.
3Touch ENTER.
4To end cooking mode, touch OVEN OFF.
SETTING CONTROLS FOR PROOF
1Touch and hold BAKE for 3 seconds to put oven in proof
mode.
2Oven temperature is preset to 85°F. Touch ENTER to
select preset temperature or use number pads to change
temperature up to 110°F.
3Touch ENTER.
SETTING CONTROLS FOR TEMPERATURE PROBE
1Touch desired cooking mode.
2Touch ENTER to select preset temperature or use number
pads to change temperature, then touch ENTER.
3Insert probe into the thickest area of food. When making
bread, cook for approximately 10 minutes before inserting
probe.
4When preheat is complete, use a pot holder to lift probe
receptacle cover, then insert probe.
5Touch PROBE. Use number pads to select temperature,
then touch ENTER. Display alternates between oven tem-
perature and actual probe temperature.
6An audible chime indicates internal temperature has
reached probe set point. Remove, then reinsert probe to
verify internal temperature.
SETTING CONTROLS FOR SELF-CLEAN
1Touch SELF CLEAN.
2Touch ENTER to start default 4-hour self-clean.
3Self-clean time can be adjusted between 3 and 4 hours.
Touch COOK TIME, enter desired self-clean time, then
enter desired stop time.
4Touch ENTER. The oven will automatically start and stop
based on the desired self-clean time and stop time.