worcest B0200 User manual

Please check the real pictures’ parts when you have troubles
to install and program this deadbolt set.
Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Before After
Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

Worcest Deadbolt

4. How to reset?
Worcest Deadbolt

Worcest Deadbolt

Before we start programming, let’s know the meaning of sound “beep” and lights.
Then, let’s learn something of the passwords.
Worcest Deadbolt

Dear friend!
I am so sorry for the inconvenience. All this you can refer to the video of our listing
pages. Please read the following steps to check why the deadbolt can't working.
About the installation part, Please fully refer to the installation instructions.
For the programming steps, you can read the wordy illustration following.
1
Make sure the open mode is as correct as your door.
2
Make sure every latch fixed tightly.
If the previous quick set up are not clearly for you, please continue reading!
Worcest Deadbolt

3
Then, check the programming part, you can first reset it, by press the reset
button. Then the default admin code is 123456, you can first open the door with
code 123456.
And then, check the batteries! You need to make it’s full of power when first use, or
it will beep beep beep all the time so you can’t do anything programming.
About the Passwords
4
Even you can use the default code to open the door, you still have to change
the default admin code to your own admin code firstly. for example, 333333.
You should first input the button with carton "open lock", then input "1", then input
"open" again; After that, input the default admin code "123456", press "open"; Then
input your own admin code, for example, "333333", then press "open"; Input "333333"
again, finally input "open".
All after that, the admin code of your own has been set, you can open the door
with code "333333" and button "open".
Worcest Deadbolt

5
Also，you can add 100 set of users code at one time, if exceeded, you need to
reset it, then the previous admin and users code can not work, you need to reset
the lock again, then another 100 codes can works.
Like the previous admin code setting. Here you need to use admin code to set
the users code.
First, you should press "open" and "1" and "open"; then input your admin code
"333333", then press "open"; after that, input the new user's code "666666", then press
"open"; again input the users code "666666", and press "open";
Then, we have set the No.1 user's code whose ID is 001. We will use the ID
code if we want to delete it. Repeat the above steps to set the users code of 002,
003 ......
Until now, you can open your door with your own codes.
But how to delete or modify a users code?
let's first do change a code, please read the following steps.
Worcest Deadbolt

6
For how to change admin code
You should first press "open" then input "2" then "open", then you can input your admin
here, previously set as "333333", then press "open"; then repeat that-input "333333", then
press "open"; now you can enter your new admin code "555555", press"open"; then repeat
that step to confirm-enter your new admin code "555555", press"open".
After this, your new admin code "555555" has been set.
7
For how to change user code
You should first press "open" then input "2" then "open", then you can input your admin
code -the last step we've change it to "555555", then press "open"; then you can enter
your old users code "666666", press"open"; now, you can input the new users code
"444444"then repeat that step to confirm-enter your new user code "444444", press"open".
After this, your new user code "444444" has been set.
Because we have changed the admin code to 555555, and we have also change the User ID
001's code to 444444, So now the new passwords 555555 and 444444 can open the deadbolt
keypad!
Worcest Deadbolt