Work Smart KCM1425 User manual

KCM1425
ERGONOMIC KNEE CHAIR
OPERATING INSTRUCTIONS
LIMITED WarranTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
WarnInG
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws
and knobs are securely tightened.
3. Check that all bolts screws and knobs are
tight every three months or as needed.
4. Dispose of packing material properly. Do not
use plastic cover as head covering. It may
cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
• SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift
lever (1). To lower seat height sit on chair and
lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
1

KCM1425
ERGONOMIC KNEE CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products May 2009
PART QTY
1. Base .......................1
2. Casters .....................5
3. Cylinder w/Bellows ............1
4. Seat Cushion .................1
5. Knee Cushion ................1
6. Seat & Knee Support ...........1
7. Flat Washers .................6
8. Short Screws .................4
9. Long Screws .................2
10. Large Flat Washers ...........4
11. Plastic Washers ..............2
12. Allen Wrench (not shown) ......1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert Casters (2) into holes of Base (1), push until you hear or feel Caster (2) snap into place.
STEP 2 Insert Cylinder w/Bellows (3) into hole of Base (1).
STEP 3 Attached Seat Cushion (4) to Seat and Knee Support (6) with arrows pointing forward, secure using four Short Screws (8) and four Flat Washers (7).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 4 Attach Knee Cushion (5) to Knee Support (6) using four Large Flat Washers (10), two Plastic Washers (11), two Flat Washers (7) and two Long Scews (9).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 5 Insert Cylinder w/Bellows (3) to Seat and Knee Support (6) and apply downward pressure.
ATTENTIoN: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFoRE USING CHAIR.
4
7
8
65
10
11
7
9
1
2
3