WorkPro WAC 7 User manual

WAC 7
User Manual
Version1.2

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 1
SAFETY INSTRUCTIONS
1. Read this manual carefully.
2. Follow all instructions and warnings.
3. Only use accessories specified by WORK PRO.
4. Follow the safety instructions of your country.
5. Be careful with sound levels.
SYMBOLS
The following symbols are used in this document:
This symbol indicates a potential risk of harm to a person or damage to the product. You
can also notify the user of the instructions that must be followed strictly to ensure the
installation or safe operation of the product.
This symbol notifies the user about the instructions that must be followed strictly to ensure
the correct installation or operation of the product.
This symbol notifies the user about additional information or optional instructions.
WELCOME TO WORK PRO
Thank you for choosing the WORK PRO WAC 7 touch panel controller.
This document contains essential information on the use of the system. Read this document carefully to
become familiar with the system.
Please check the WORK PRO website regularly to download the latest version of the document and
software updates: https://www.workpro.es/

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 2
CONTENT
1. INTRODUCTION.................................................................................................................................3
2. TECHNICAL DATA ..............................................................................................................................3
3. DEVICE DESCRIPTION........................................................................................................................4
Frontal view ...............................................................................................................................4
Rear view ...................................................................................................................................4
4. DEVICE CONFIGURATION..................................................................................................................5
5. WorkCAD3 Player..............................................................................................................................6
6. MOUNTING .......................................................................................................................................7
7. ACCESSORIES.....................................................................................................................................8

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 3
1. INTRODUCTION
WAC 7 is a wall-mount touch controller, in which you can load layouts generated by
WorkCAD3 Editor. Through these layouts, you can control all those WORK PRO devices that
accept OSC control commands, such as the BlueLine digital MKII series devices and many of
the devices in the LightMouse series. On the other hand, you can also control third-party
devices if you use the server plugin available for WorkCAD3 Editor. This plugin will allow you
to control devices via UDP, TCP, serial port or OSC.
2. TECHNICAL DATA
General
Layouts generator
WorkCAD3 Editor
Screen technology
IPS
Resolution
1024x600 pixels
Number of colours
16 millions
Screen dimensions
7“
CPU
ARM Cortex A7 Octa-Core
CPU speed
1.8 GHz
Ethernet
100 base TX
Connector
RJ 45
Dimensions
182 x 121 mm
Weight
529 g
Main supply
External power supply
9/24Vdc (Included)
PoE Class
Class 0 802.3af
Consumption
6 W

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 4
3. DEVICE DESCRIPTION
Frontal view
1. Screen. Touch screen for the visualization and use of layouts.
Rear view
2. Main supply input. 9/24 Vdc. (1A minimum).
3. LAN port. Connection port to the local network, RJ45. It allows PoE power (Class 0
802.3af).
4. USB port: USB connection port type A. DISABLED (Enabled in future updates).

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 5
Check the correct polarity before connecting the power.
The external power supply is provided with the device.
Remember to use ONLY WORK PRO ACCESSORIES.
4. DEVICE CONFIGURATION
The configuration of the device must be done through WorkCAD3 Configurator.
After completing the IP level configuration and updating of the device (see WorkCAD3
Configurator manual), proceed to its configuration.
By clicking with the left mouse button on the device, the configuration interface will be open
showing the following parameters:
oDisable layout Selection. It allows to disable the layout selection menu on the device,
avoiding that the end user can change the layout.
oKeep Backlight On. It allows the WAC 7 screen to never turn off.
oRefresh. Button to refresh the field dedicated to layouts saved on the device.
oExecute Layout. Button to execute the selected layout from the list.

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 6
oSend Layout To Device. Button to send a layout saved in the PC to the WAC7. This
layout will be auto executed.
oReceive a Layout From Device. Button to receive, on the PC, a layout stored in the
WAC 7.
oRemove Layout. Button to delete the selected layout from the list.
oDownload log. Button to save in a PC of the log associated to WAC7.
In addition to transfer the layouts via WorkCAD3 Configurator, the layouts can also
be transferred to WAC 7 using WorkCAd3 Editor. For more information go to the
following link.
https://www.youtube.com/watch?v=SSqsRyJ54r4&list=PLB48E41z2AlfchcU-
qhshZ03GdpLW0hf0&index=13
5. WorkCAD3 Player
Once the WC7 starts, the screen will show the new menu:
oMenu button. Allows to access to different setup menus.
oExecute. Allows to execute the selected layout.
oStop. Allows to stop the execution of the lyout.
oRemove. Allows to eliminate the selected layout.
oAutomatic/Manual. Select the execution mode of the layouts.
If you press the menu button, it appears different options:
. File: It allows the file management.

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 7
oAdd layout. Allows to send a file from workCAD3 Editir.
oOpen layout. Allows to open a layout saved in the own WAC7.
oOpen Recent Layout. Allows to open a recent layout saved in the own WAC7.
oExit. Exit from the File menu
Edit Allows to edit several parameters.
oOptions. Allows setup the application options.
oKeep Screen On. Enable/disable the screen will be on
oReopen last layout. Enable/disable the execution of the last layout
automatically.
oSave log to file. Enable/disable the log save.
oPrevent Layout Selection. Enable/disable the layout selection screen access.
oDisable mDNS Service. Enable/Disable the mDNS service. Is necessary to
select for the layputs created with link by IP inWorkCAD3 Editor.
-View. Allows to access to different informative screens
oSystem Settings. Allows to access to Android operative system configuration.
oEthernet Setting. Allows to access to the device information.
oAbout. Informs about the software version on the device.
If you need to access to the menus and Layouts selection during the execution of a
layout, press the screen 4 times and press Close Layout button.
6. MOUNTING
Dimensions: mm
The WAC 7 can be mounted in two different ways:
oWall-mounted. Using the included mounting box.

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 8
oDesktop. Using the included plates.
7. ACCESSORIES
Use the included frame to fix the WAC 7 to a wall using the fixation points.
WAC 7 includes 2 plates in order to fix it and to place the device in a desktop position.

WAC 7
USER MANUAL
VERSION 1.2
WAC 7 www.workpro.es 9