Workrite Ergonomics Workrite Glide User manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com
#1500143 - Rev C
Installation Instructions
for Workrite Glide™
Verify that you have all the hardware
needed for the assembly.
Workrite Glide Parts
AKeyboard and Mouse Platform Qty: 1 C#10 x 32 x ½" Phillips at-head screws
Qty: 4
FDocument Holder Qty: 1
BMouse Trap Qty: 1
D 10 x 32 Kep-nuts Qty: 4
GCord Clips Qty: 4
.75
IMouse Wrist Rest Qty: 1*
*provided with model
numbers starting with
3131 or 3132
#2 Phillips-head Screwdriver

Workrite Ergonomics | 800.959.9675 www.workriteergo.com
2Attach Platform to Track
Arm using four Screws and
Kep-nuts provided.
B
A
1Slide Mouse Trap onto back
edge of Mouse Platform.
C
F
3Snap Document Holder onto
back of Keyboard Platform.
D
4Adhere Cord Clips to sides
of Track Arm.
G
1
2
3
4
I
If provided, clip Mouse Wrist
Rest onto Mouse Platform.
5
6
Note: If installing on Locking
Lever Arm, use longer bolts
provided with the Locking Lever
Arm - not the screws in this kit. Locking Lever Arm
NOTE - Track Arm must be
installed under worksurface
before attaching Platform.