WORLD LEDS GO 8CT318WLG User manual

CONTROLADORA RGB CROMATICO
SISTEMAS DE CONTROL
WWW.WORLDLEDSGO.COM
[e-mail]
LINEA HOGAR
Especificaciones técnicas
CÓDIGO 8CT318WLG
GENERAL INTRODUCTION
This is a multi-functional LED dimmer, a common RGB
dimmer with touchable function, using the most ad-
vanced PWM technology; It’s dedicated to control RGB
color changes of full color LED lights with 4-wires, 3
channels (common anode), such as RGB LED module,
LED strip, LED flexible tape, and other LED lights.
2
113.5 × 55 × 21 mm
CHANGING MODE LIST
1- RBG gradual change
2- RG gradual change
3- RB gradual change
4- GB gradual change
5- Full color gradual change
6- RGB Jump change
7- Full color Jump change
8- Red fade
9- Green fade
10- Blue fade
1. Please don’t install this dimmer in lightening, intense
magnetic and high-voltage fields.
2. To reduce the risk of component damage and fire
caused by short circuit, make sure
correct connection
3. Always be sure to mount this unit in an area that will
allow proper ventilation to ensure
a fitting temperature.
4. Check if the voltage and power adapter suit the dimmer
5. Don’t connect cables with power on, make sure a cor-
rect connection and no short circuit checked with instru-
ment before power on.
6. Please don’t open dimmer cover and operate if prob-
lems occur.
The manual is only suitable for this model; any update is
subject to change without prior notice.
ATENCION TECHNICAL PARAMETERS
Input Voltage
Remoter size
Lifespan
Accessories
DC12/24V
L113.5 × W55 × H21 mm
40000 hours
3 pcs AAA batteries
Loadable Current
Gross Weight
Power consumer
Protection (w/ warring led)
Max.6A×3CH
93g
1 Year/3*AAA Battery
Short protect. Over Current
Protect. Over Temperature
Color Modes
Wireless mode
Remoter material
Output Power
Intensity Steps
Grey Steps
Working Temp
Controllable Distance
Dimmer Size
10 modes
touchable/RF
ABS+PC
Max.216W/12V, 432W/24V
8 Steps
256 steps per RGB
-35°C - 55°C
Max 20M
L167 × W52 × H24 mm
INSTALACION

CONTROLADORA RGB CROMATICO
SISTEMAS DE CONTROL
WWW.WORLDLEDSGO.COM
[e-mail]
LINEA HOGAR
Instrucciones
2
MATCHING OF DIMMER AND REMOTER
The distance of wireless control is about 20 meters. One
remoter can simultaneously control all valid code within
the effective distance, please operate as per the follow-
ing ways:
1. Press (4) button on the remoter 3 seconds before turn-
ing on, the white indicator will blinker 3 times, then the
dimmer can be controlled by this remoter.
2. It can’t affect the finished matching after changing the
battery, no need additional setting after loading the new
battery, it can be used directly.
3. When you don’t want to use the remoter to control the
lamp, press (4) keys 6 times in 3 seconds, the lamp will
blinker 6 times quickly, clearing way is successful.
INSTALLATION BATTERY OF THE REMOTER
This remoter is used 3 AAA batteries, each voltage is
1.5V.
Open the cover of the battery; load 3 AAA batteries cor-
rectly as per the positive and negative instructions in the
battery pack.
Notice: When loading the battery, please remember not
to touch the color ring or use the palm to cover the color
ring, use the remoter 5 seconds later. If happening to
touch the color ring, the remoter has no reaction after
changing the battery, please take off the batteries, and
reload the battery 5 seconds later.
FUNCTION INSTRUCTIONS
BUTTON
On/Off
Light changing
mode
White light
Intensity up (4)
Intensity down
Color Ring
Press Key 1 to turn on/off in
any state.
Press Key 2 to activate light
changing mode, a new mode
each press, 10 modes in total.
Long press(3S), Mode will be
reset to mode 1.
Press Key 3 to activate white
light mode.
Increase the brightness by
every pressing, total 8 steps.
Decrease the brightness by
every pressing, total 8 steps.
Touch the color ring to en-
ter static color mode, In this
mode, slide your finger on the
color ring, choose the color
you need optionally, and the
color ring is only effective for
the body finger.
SIGN DESCRIPTION
EXCEPTION HANDLES
CAUSATION
1. No power;
2. The protection of the power supply is active;
3. Wrong connection
4. Wrong connection from RGB wire
5. In-phase cable connected wrong
6. Wrong battery installation;
7. Beyond controllable distance
No light
Incorrect color
Amplifier not in phase
No response from the
remoter
1. Check the power
2. Check the fault, then power on again;
3. Check the connection
4. Re-connect RGB wires correspondently
5. Re-connect in-phase wires correspond-
ently
6. Install the battery correctly;
7. Reduce remote controllable distance;
MALFUNCTION SETTLE