World Market Caspian 618188 User manual

R
Assembly Instructions
Page 1
2022.09.07
Caspian Open Bar Console
SKU - 618188
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST WORLD MARKET STORE
IF YOU ARE NOT NEAR A STORE PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
All products sold at World Market are not for commercial use and are intended for residential use only.

A
B
C
D-1
E
F
DESCRIPTIONPICTURE
Top Frame
Middle Frame
Shelf Frame
Left Leg Frame
Bottom Rail
Wine Glass Rack
1
1
2
1
2
1
Component List
Page 2
LABEL Q.TY
D-2 Right Leg Frame 1

LABEL Q.TY
PICTURE
LABEL DESCRIPTION QTY
1
T-1
PICTURE
Allen Key 4 x 110 x 30 mm
Allen Bolt M6 x 15 mm
Lock Washer Ø6 x 10.5 x 1 mm
Flat Washer Ø6 x 13 x 1 mm
Y Head Allen Bolt M6 x 13 mm
Hardware List
Tool List
Page 3
DESCRIPTION
Anti Tip-kit
H-2
H-3
H-4
H-1
H-5
24
24
24
6
1

Before Beginning:
Page 4
Assembly Preparation
Read instructions, cover to cover.
In case of missing parts, please contact your nearest World Market store or call
our customer service call center at call 1-877-967-5362.
Assemble on a clean non-marring surface (packing foam).
Unpack all hardware bags and components to ensure you have all parts.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Save all packaging until finished.

Step 1
Step 2
T-1
A
(H-4) Flat Washer x 2
(H-2) Allen Bolt x 2
(T-1) Allen key
(H-3) Lock Washer x 2
Place Top Frame (A) down on a padded, non-marring surface as shown. Position and secure Top Frame (A) to
Middle Frame (B) using Allen Bolts (H-2), Lock Washers (H-3) and Flat Washers (H-4), stacking the hardware
in the order as shown. Fully engage all bolts using Allen Key (T-1) but do not tighten them yet.
H-2
H-3
H-4
(H-4) Flat Washer x 3
(H-2) Allen Bolt x 3 (T-1) Allen key
(H-1) Y Head Allen Bolt x 2
(H-3) Lock Washer x 3
Position and secure Top/ Middle Frame Assembly to Left Leg Frame (D-1) using Y Head Allen Bolts (H-1) for
the Middle Frame (B), Allen Bolts (H-2), Lock Washers (H-3) and Flat Washers (H-4) for all other connection
points, stacking the hardware in the order as shown. Fully engage all bolts using Allen Key (T-1) but do not fully
tighten them yet.
Assembly Steps
Page 5
H-2
H-3
H-4
T-1
H-1T-1
T-1
H-2
H-3
H-4
x2
Top
Front
Top
Front
B
B
A
D-1
x2
x2

Page 6
Step 3
Step 4
Using a second person to assist you, attach both Shelf Frames (C) to Left Leg Frame (D-1) using Allen Bolts
(H-2), Lock Washers (H-3) and Flat Washers (H-4) stacking the hardware in the order as shown. Fully engage
all bolts using Allen Key (T-1) but do not tighten them yet.
(H-4) Flat Washer x 6
(H-2) Allen Bolt x 6
(T-1) Allen key
(H-3) Lock Washer x 6
H-2
H-3
H-4
T-1
H-1
T-1
H-2
H-3
H-4
(T-1) Allen key(H-1) Y Head Allen Bolt x 2
T-1
Top
Front
Top
Front
Position and secure Bottom Rail (E) to Left Leg Frame (D-1) using Y Head Allen Bolts (H-1), fully engage all
bolts using Allen Key (T-1) but do not tighten them yet.
D-1 A
B
C
C
A
D-1
E
C
C
B
x4
x2
x2

Step 5
Page 7
(H-4) Flat Washer x 9
(H-2) Allen Bolt x 9 (T-1) Allen key
(H-1) Y Head Allen Bolt x 2
(H-3) Lock Washer x 9
H-1 T-1 H-2
H-2
H-3
H-4
T-1
Note: A second person should hold the Bottom Rail (E) while performing this assembly step.
Attach Right Leg Frame (D-2) to Assembly from step 4 using Y Head Allen Bolts (H-1) for the Bottom Rail (E),
Allen Bolts (H-2), Lock Washers (H-3) and Flat Washers (H-4) for all other connection points, stacking the
hardware in the order as shown. Fully engage all bolts using Allen Key (T-1) but do not fully tighten them yet.
H-3
H-4
T-1
Front
A
B
C
C
D-1
E
D-2
(H-4) Flat Washer x 4
(H-1) Allen Bolt x 4
(T-1) Allen key
(H-3) Lock Washer x 4
H-1
H-3
H-4
T-1 Top
Front
F
Note: This step in optional.
Using a second person to assist you, place assembly upright. Position and secure Wine Glass Rack (F) to Top
Frame (A) using Allen Bolts (H-2), Lock Washers (H-3) and Flat Washers (H-4), stacking the hardware in the
order as shown. Fully engage all bolts using Allen Key (T-1). Fully tighten all bolts from this and previous steps
at this time. Do not over tighten.
Step 6: (Optional)
Top
x2
x6
x3
x4

Step 7
Page 8
NOTE: Levelers can be used
for adjustment if needed.
ADJUSTABLE LEVELER
Ensure that all bolts have been fully tightened. Assembly is now complete and ready for use.
NOTE: Levelers can be adjusted for additional stability if needed.
Front

Page 9
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture in direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside. For indoor use only.
All products sold at World Market are not for commercial use and are intended
for residential use only.
Dust and pick-up spills using a clean,non-colored, lint-free, dry cloth.
Cleaner
Care & Maintenance

75 mm
Anti-Tip Measures
Anti-Tip kit contents Anti-Tip kit installation
Warning - Children may be injured by tipping of furniture and the use of the Anti-Tip Kit is highly recommended.
This Anti-Tip Kit is only a deterrent It is not a substitute for proper adult supervision. Manufacturer and retailer
assumes no liability for improper installation or excess loads placed on screws, brackets, or straps.
When properly installed, this restraint provides protection against unexpected tipping of furniture.
This Anti-Tip Kit MUST be installed into the wall using proper mounting hardware OR into a wall stud using
appropriate screws. Position of the Anti-tip Kit depends on the product and the location of the wall studs. The
hardware provided is not a comprehensive solution for all wall types. Be sure to consult a professional or your local
hardware store to determine the hardware needed for your specific wall type (plaster, drywall, concrete, etc,...).
Children have died from
furniture tipover. To reduce the
risk of furniture tipover:
·ALWAYS install tipover restraint
provided.
·NEVER put a TV on this product.
·NEVER allow children to stand,
climb or hang on drawers, doors,
or shelves.
·NEVER open more than one
drawer at a time.
·Place heaviest items in the
lowest drawers.
This is a permanent label.
Do not remove!
WARNING
Children have died from
furniture tipover. To reduce the
risk of furniture tipover:
·ALWAYS install tipover restraint
provided.
·NEVER put a TV on this product.
·NEVER allow children to stand,
climb or hang on drawers, doors,
or shelves.
·NEVER open more than one
drawer at a time.
·Place heaviest items in the
lowest drawers.
This is a permanent label.
Do not remove!
WARNING
H-5
Attach to the top back corners with screws
(included in the Anti-Tip Kit)
Connect with
plastic straps.
Attach to the wall stud
with screws
(included in the
Anti-Tip Kit)
2x
A
Page 10