World Market Sansur 596934 User manual

Assembly Instructions
Sansur Headboard
SKU–596934&596933
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
NOT FOR COMMERCIAL USE.
Page 1

Component List
LABEL DESCRIPTION
QTY
A
Headboard
1
B Leg 2
Hardware List
LABEL DESCRIPTION QTY
H-1 Allen Bolt
M6 x 50mm
16
H-2
Long Hex Bolt
M8 x 80 mm
6
H-3 Nut
6
H-4
Large Washer
Ø22/8.5 x 2mm
12
H-5
Small Washer
Ø16/6.5 x 2mm
6
H-6
Spring Washer
12
Tool List
LABEL
DESCRIPTION QTY
T-1
Allen Key
1
T-2
Wrench
1
Page 2

Assembly Preparation
Before Beginning:
 Unpack all hardware bags and components to ensure you have all parts-
 Read instructions, cover to cover-
 Have 2 adults on hand for assembly-
 Do not assemble on flooring or carpet-
 Assemble on a clean non-marring surface (packing foam)-
 Save all packaging until finished-
 In case of missing parts, please contact your nearest Cost Plus World Market store or call our
customer service call center at call 1-877-967-5362.
Page 3

Assembly Steps
Step 1
- Lay the Headboard (A) upside down on a non-marring surface (packing foam).
- Align holes on the Leg (B) with corresponding holes on the back of Headboard (A).
- Secure each Leg (B) using 3 Allen Bolts (H-1), Spring Washers (H-6) and Flat Washers (H-5), stacking the
hardware in the order as illustrated. Repeat the process for the other Leg (B).
- Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
- Using a second person to assist you, carefully turn the headboard assembly upright.
Step 2
- Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
- NOTE: Headboard is designed to fit most standard bed frames. The hardware provided is not a comprehensive
solution for all frame types. Consult a professional or hardware store to determine the hardware needed for your
specific application.
Page 4
(H
-
1) Allen Bolt x
6
(H-5) Flat Washer x 6
(H-6) Spring Washer x 6
H1
H5
A
B
T1
H6
FRONT
T1

Care & Maintenance
 Do not put hot items directly on furniture surface.
 Do not clean furniture with harsh cleansers or polish.
 Do not place furniture in direct sunlight.
 Do not place furniture near heating or cooling vents.
 Do not write on furniture without a padded barrier to protect the
surface.
 Do not place furniture outside. For indoor use only.
 Not for commercial use. For residential use only.
 Dust and pick-up spills using a clean, non-colored, lint-free, dry
cloth.
Page 5