World Market 566585 User manual

Assembly Instructions
Page 1
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS PIECE, PLEASE CONTACT THE
NEAREST COST PLUS WORLD MARKET STORE. IF YOU ARE NOT NEAR
A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL CENTER TOLL
FREE AT 877-967-5362 FOR ASSISTANCE.
NATURAL WOOD GOLD 3-TIER SHELF
SKU-566585
NOT FOR COMMERCIAL USE.

Parts List
Picture Description
Shelf
Qty
1
Label
A
Page 2
4
4
H-1
H-2
Hardware List
Tool List
Screwdriver
Drill Machine
Pencil
T1
T2
T3
Not
Included
Not
Included
Not
Included
35 12

Assembly Preparation
Before Beginning:
Page 3
•
Unpack all hardware bags and components to ensure you have all parts .
•
Read instructions, cover to cover .
•
Save all packing until finished .

Assembly Steps
Page 4
Step-1
Step-2 Step-3
T-2 (Not Included)
H-1
Pre-drill holes at the marked location with
a Drill machine (T-2) (not included). Insert
Wall Plug (H-1) into pre-drilled holes.
Drive the screws (H-2) into top wall plugs
(H-1) using screwdriver (T-1) as shown.
Leave 1/4" of screw out of the wall.
H-2
H-2
WALL
Wall
(Not Included)
H-1
H-1
Hold the shelf (A) on the wall and mark the location of the holes as desired. Ensure location
can support the weight of the shelf (A) and the max load weight of any loaded contents.

Assembly Steps
Page 5
Step-4
Step-5
Wall
Wall
Align shelf (A) on the protruded screws (H-2) and insert screw (H-2) into attached hardware until
it is locked and shelf (A) is secure.
Align and insert screw (H-2) through the lower holes of the installed hardware below shelf
(A) and tighten all screws (H-2) fully with screwdriver (T-1). Assembly is complete.

Step-6
Product is ready to use.
"Max weight 35 lbs each shelf, Total max weight for total shelf 105 lbs"
Page 6