World Market Cailen Desk 598932 User manual

AssemblyInstructions
Cailen Desk
SKU–598932
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
NOT FOR COMMERCIAL USE.
Page 1

ComponentList
LABEL
DESCRIPTION
QTY
A
Table Top
1
B
Metal Leg
2
Hardware List
LABEL
DESCRIPTION
QTY
H-1
Allen Bolt
M6 x 30mm
8
H-2
Flat Washer
8
H-3
Spring Washer
8
Tool List
LABEL
DESCRIPTION
QTY
T-1
Allen Key
1
Page 2

AssemblyPreparation
Before Beginning:
Unpack all hardware bags and components to ensure you have all parts-
Read instructions, cover to cover-
Have 2 adults on hand for assembly-
Do not assemble on flooring or carpet-
Assemble on a clean non-marring surface (packing foam)-
Save all packaging until finished-
In case of missing parts, please contact your nearest Cost Plus World Market store or call our
customer service call center at call 1-877-967-5362.
Page 3

Assembly Steps
Step 1
- Lay the Desk Top (A) upside down on a non-marring surface (packing foam).
- Align holes on the bracket Leg (B) with corresponding holes on the bottom of Desk Top (A).
- Secure each Leg (B) using 4 Allen Bolts (H-1), Spring Washers (H-3) and Flat Washers (H-2), stacking the
hardware in the order as illustrated. Repeat the process for the other Leg (B).
- Engage all bolts by hand first, then fully tighten all Allen Bolts (H-1) with the supplied Allen Key (T-1).
- Using a second person to assist you, carefully turn the table assembly upright.
Step 2
- Check that all bolts have been fully tightened. Assembly is now complete and the product is ready for use.
- NOTE: Levelers on the bottom of both Legs (B) can be used for additional adjustment if needed.
Page 4
TOP
ADJUSTABLE
LEVELERS
(H-1) Allen Bolt x 8
(H-2) Flat Washer x 8
(H-3) Spring Washer x 8
H1
H2
A
B
T1
H3
TOP

Care & Maintenance
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture in direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the
surface.
Do not place furniture outside. For indoor use only.
Not for commercial use. For residential use only.
Dust and pick-up spills using a clean, non-colored, lint-free, dry
cloth.
Page 5

Anti-TipMeasures
WARNING–Young children may be injured by a tipping furniture and the use of a tipping restraint is highly
recommended.
This kit is only a deterrent. It is not a substitute for proper adult supervision. Manufacturer or retailer assumes
no liability for improper installation or excessive loads placed on screws, brackets, or straps.
When properly installed, this restraint could provide protection against the unexpected tipping of furniture
Werecommend mounting this restraint to a wall stud using the proper mounting hardware.
Anti-tip kit contents Anti-tip kit installation
Page 6