World Video Sales MicroImage Video Systems PG314N User manual

PG314N
PG314P
Pattern Generator
With Four Custom Patterns
MicroImage Video Systems
division of World Video Sales Co., Inc
P.O. Box 331
Boyertown, PA 19512
610-754-6800
Fax [phone]
[email protected]
www.mivs.com
Page 2
CONTENTS
Version PG314-01 Rev 01 04-29-2005
UNPACKING ................................ Page3
CONNECTIONS .............................. Page3
Power................................ Page3
VideoConnections ....................... Page3
S-Video(YC) ........................... Page3
Video ................................ Page4
OPERATION................................. Page4
PowerSwitch........................... Page4
OffSwitch .......................... Page4
Patterns1-4 ........................... Page4
Brightness .......................... Page4
PATTERNSTYLES ............................. Page5
INCASEOFDIFFICULTY ........................ Page5
SPECIFICATIONS ............................. Page6
WARRANTY ................................. Page8
RETURNS .................................. Page8

Page 3
UNPACKING
CONNECTIONS
The Pattern Generator package includes the following items:
PG314 Pattern Generator Unit
Universal DTS series 12VDC Power Supply
This operation manual
Please inspect all items carefully and report damaged or missing
items to your dealer or MicroImage Video Systems.
Power
The Pattern Generator uses a 12VDC universal table top power
supply. For medical applications, a special low leakage power unit is
also available. Connect the power supply to a suitable power source.
This product will also operate from an external source of 9 to 20VDC
Video Connections
The MicroImage Pattern Generator will operate with a variety of video
signal formats. The PG315 will operate with either composite/B&W
or S-Video signals. Only one type of video signal should be
connected at a time.
S-Video (YC)
Connect the video source (i.e. camera) to the S-VIDEO IN connector
on the Pattern Generator.
Connect the S-VIDEO OUT signal from the Pattern Generator to the
video display.
The Pattern Generator uses industry standard mini-DIN connectors
for S-Video
Page 4
OPERATION
Video (NTSC composite or B&W)
Connect the video source (i.e. camera) to the VIDEO IN connector on
the Pattern Generator
Connect the VIDEO OUT signal from the Pattern Generator to the
video display.
The Pattern Generator uses industry standard BNC connectors for
composite video.
Connecting inputs or outputs to both the mini-DINs and the BNC
connectors simultaneously will result in a loss of video quality or
improper operation.
The Pattern Generator is designed to be easy to operate while also
providing maximum flexibility. All the controls are listed below.
Power Switch The Power Switch and power indicator are
located on the right side of the front panel.
Off Switch Depressing the off switch will illuminate the
LED next to the switch. Video will continue to
flow through the unit but the pattern will not
be displayed.
Patterns 1-4 Depressing a pattern switch will illuminate the
LED next to the switch and display the related
pattern on the screen.
Brightness Rotating the brightness control clockwise will
increase the brightness of the displayed
pattern. Rotating the control counter-
clockwise will cause the pattern to become
darker. The brightness can be adjusted from
black to white.

Page 5
PATTERN STYLES
IN CASE OF DIFFICULTY
The PG314 Pattern Generator units contains four user defined custom
patterns. These patterns are factory programmed and cannot be
altered by the user.
If you are experiencing problems with any MicroImage product, you
can contact MicroImage Support using the following methods:
Phone [phone]
Fax [phone]
Email [email protected]
Web www.mivs.com
Page 6
SPECIFICATIONS
Main Unit
Available Patterns Up to four user defined, plus off (no pattern display)
Front panel switches Pattern Selects (5) and Power
Line resolution 640 x 480 (NTSC) or 768x576 (PAL)
Sync system NTSC (RS-170) or PAL (CCIR)
Genlock Precision Phase Locked Loop (PLL)
Input levels
Composite 1.0 Vpp composite, 75 S
S-Video 1.0 Vpp (Y), 0.286 Vpp burst (C), 75 S
Output levels
NTSC, S-Video Same as respective input ±5% into 75 S
Bandwidth Greater than 30 MHz
Connectors
NTSC BNC Female
S-Video 4 pin mini-DIN Female (Std. S-Video conn.)
Temperature
Operating 0° -40° C (32° -104° F)
Storage -40° -60° C (-40° -140° F)
Humidity
Operating 10% -90% (non-condensing)
Storage 5% -95% (non-condensing)
Power 9 - 20 VDC, 3W max
Size 5.6" (142 mm) x 4.4" (112 mm) x 1.2" (41 mm)
Weight 11 oz. (312 g)
Manufactured in Bechtelsville, PA USA by MicroImage Video Systems
Power Unit - table top with universal input
Part Number DTS120200UC-P5P (or DTS120150U/AC1-P5)
Input Universal, 100-240VAC, 47-63Hz, 0.4A, 3wire
Output 12VDC, 2A (1.5A), regulated
Type Switching
Leakage about 100uA
Size 4.25" (108mm) x 2.18" (56mm) x 1.4" (36mm)
Weight 14 oz. (184g) with power cord
Includes 120V US 3 wire power cord

Page 7 Page 8
WARRANTY
RETURNS
MicroImage Video Systems warrants that each PG314 Pattern Generator is
free from defects due to faulty materials or improper workmanship for a
period of one (1) year. MicroImage Video Systems further warrants that any
part which proves defective in materials or workmanship within one (1) year,
will be replaced or repaired at no cost to the user. Labor to replace defective
parts will be done without charge, provided the equipment is returned to
MicroImage Video Systems prepaid, insured and properly packaged. Prior
return authorization must be obtained from MicroImage Video Systems.
NOTE
This warranty covers the PG314 MicroImage Pattern Generator only.
CONDITIONS
This warranty is void if the warranted part has been altered or subjected to
abuse or misuse. Defective parts must be returned to MicroImage Video
Systems
SOLE WARRANTY
This Warranty is in lieu of all other warranties expressed orimplied including,
without limitation, any implied warranty or any implied warranty of fitness
for a particular purpose. MicroImage Video Systems shall have the final
right to determination as to the existence and cause of any defect and its
appropriate adjustment in accordance with the terms of this warranty. In no
event shall MicroImage Video Systems be liable for any consequential or
collateral damages.
All returns MUST have an RMA number. Please call, fax or email for
an RMA form. The RMA form will have the proper shipping address for
returns.
Phone [phone]
Fax [phone]
Email [email protected]