
4 Version 1.0
OPERATING THE CAMERA
GETTING STARTED
1. Plug the camera in using the provided USB cable and AC
Adapter
2. Make sure a compatible microSD card is inserted into the
unit.
3. Once you device is plugged in, press the A button on the
remote one time. The device will beep indicating that it is
powered on.
NOTE: When the device powers on, it immediately enters into
motion detection mode.
4. To save any active recordings and return to standby mode
press the D button on the remote. You will hear 2 short
beeps indicating the device has left motion detection
mode and entered standby mode.
BEGINNING A NEW VIDEO RECORDING
1. When in standby mode you may begin a new recording by
pressing one of the video buttons.
oTo begin a motion activated recording, press the D
button one time. The device will emit one short
beep indicating it is now in motion detection mode.
oTo begin a continuous recording, press the C
button one time. The device will emit one short
beep indicating it is now in continuous recording
mode.
2. To stop recording in either mode, press the mode button
that you are currently recording in again and the device
will emit 2 short beeps indicating it has stopped recording
and returned to standby mode.