Wozart Smart Plug User manual

Installation guide
Wozart Smart Plug
Installation Guide Version 1.0
Updated on 07/09/2021

For configuration video, scan the QR code below
For iOS devices
For Andorid devices
2
Welcome
This Guide will walk you through the installation of Wozart Smart Plug
We hope you enjoy your purchase. We at Wozart have carefully crafted a reliable,
durable and secure Smart Home product. We promise to toil harder to build
awesome devices that make life simpler and planet more livable.
We hope our association continues and grows stronger with each passing day. You
are awesome for supporting the change we wish to bring in the way people live
As Wozart app is frequently updated, there may be changes to this manual.
Please refer to www.wozart.com/support for the latest version of the manual.
Download Wozart app from Google play store or App store.

Table of Contents
What’s in the box 4
Technical Specifications 5
Description 5
Setup Guide 7
Troubleshooting 8
Warranty & Service 9
Precautions 6

What’s in the box
4
Warranty CardSetup Code Sticker
XXXX
XXXX
Wozart Smart Plug

Description
Technical Specifications
Wozart Smart Plug is a smart device that turns electrical appliances or circuits on
and off. The device fits into your existing wall socket and can be controlled either
using voice commands or app interfaces on smart controller devices.
5
Power Supply 110 - 230 V AC
1 * 20 A
0-40°C
0-95 % RH without condensation
Wi-Fi 2.4 GHz 802.11
76.5 mm * 50 mm * 69 mm
128 Gms
WSP01
Rated load current
Operating Temperature
Ambient Humidity
Communication Protocol
Weight
Model
Dimensions
(Height*Width*Depth)

6
Precautions
• The device is designed for control of heavy power appliances.
• Do not handle the device with wet or moist hands.
• Do not modify or alter the device in any way not included in this manual.
• Do not use in damp or wet locations, near shower, swimming pool, sink, or
anywhere else where water or moisture are present.
• Do not connect device to loads exceeding recommended values.
• Load plugged in to the device must be powered by 110-230 V AC power
• If you do not have basic electrical wiring knowledge, please get help of an
electrician or contact us.
69 mm 50 mm
76.5 mm

Setup Guide
Switch off the main power supply
• Insert Smart Plug into the 16A power socket.
• Plug in the appliance into the Wozart Smart Plug.
• Turn on the main power supply to the device and proceed with configuration
on the Wozart app.
7

Troubleshooting
The device isn’t responding
a) Check if the Wi-Fi router is functioning properly.
b) Reconnect your smart controller device
eg: Phone to Wi-Fi network to which Wozart device is connected.
c) Switch off the power supply to the device for 5 seconds and then switch it
back ON.
d) Do factory reset as explained below and reconnect the device.
Factory Reset
Press and hold the reset switch on the top of the device for 10 seconds until you hear
the buzzer sound.
Note: If factory reset is done all your customization is lost. Do it only if required.
Not able to scan the QR sticker as it is damaged.
Use the Spare QR Sticker provided in the Wozart Smart Plug box or enter the
code manually.
8

Warranty and Service
This Wozart device can be replaced in full for three years from date of purchase
in case of damage or malfunction due to manufacturing defects. This Warranty
does not cover cosmetic damage or damage from accident, neglect, misuse,
alteration or abnormal conditions of operation or handling. Wozart Technologies
or any of it licensors are not liable for any special, incidental, consequential or
indirect damages or losses arising from any cause.
Resellers are not authorized to extend any other warranty on Wozart’s behalf.
Service for all Wozart products will be provided for device life time. To obtain
service, contact nearest authorized reseller or Wozart Technologies Private
Limited.
9

Wozart Technologies Private Limited
Thank You