Wusic Womb Music Compact User manual

Womb Music by Wusic ® WMCompact
Womb Music
Heartbeat Monitor
USER GUIDE
Manual Version: Version 1.7
Date of Issue:2016.05.08 0482

Womb Music by Wusic ® WMCompact
Quick Start Guide!
We know you are anxious to get started with your Womb
Music Heartbeat Monitor but we’d like to encourage you to
read the whole guide for helpful information and consider
visiting our website for FAQs and Videos that may help.
1. Install the 9 volt battery to the battery clip & make sure
it is firmly connected.Don’t forget to unwrap the clear
plastic protective wrapper from the 9 volt batteryfirst.
2. Connect at least one of the ear buds to the monitor
and put them in your ears.
3. Turn on the monitor and test it on your own heart first
with some lube to make sure it is working correctly. If
you don’t hear your own heartbeat then troubleshoot
before trying to find the babies heartbeat.
4. When the monitor is working correctly you can now lay
back and apply lube to your tummy.
5. Now put the monitor to your tummy and move it very
very very slowly until you locate yourbaby.
6. Listen, Record, Shareand Enjoy.
If you have any difficulties please look for solutions in the
user guide detail pages. You can also find additional
information in the Frequently Asked Questions on our
website or Contact Us directly for assistance!
Page 2 of 20

Womb Music by Wusic ® WMCompact
Thank You for Your Purchase!
We hope you are completely satisfied with your
Womb Music Heartbeat Monitor purchase.
In the unlikely event you are not 100% satisfied,
please call us at 803-485-1544 or email us at
[e-mail] so we can correct the
situation for you. We won't be satisfied until you are
completely satisfied.
If you are pleased with your purchase then not only
would we love to hear about it, but we'd love for you
to let our other customers know how you feel.
To Provide Feedback
On Our Website
1. Go to www.Womb-Music.com
2. Click on the product
3. Click "Write a Review"
4. Share on our social media also
On Amazon
1. Log into Amazon.com
2. Click "Your Account"
3. Click "Your Orders"
4. Click "Leave Seller Feedback"
Your reviews and seller feedback allow us to give
you the best products and service possible!
Page 3 of 20

Womb Music by Wusic ® WMCompact
Register Your Purchase!
To ensure your rights for free VIP support and extend
your product warranty to one year, please register
using the website below.
Benefits of Registration Include:
·Validates your purchase
·Extends your standard 90 day warranty to a one
year warranty (based on purchase date)
·Faster customer service including phone service
if you'd like us to call you to assist
·Possible free trials of new products
·Special offers and discounts
Register your purchase at
www.WusicTech.com/pages/register
Page 4 of 20

Womb Music by Wusic ® WMCompact
Using Your Womb Music
Welcome to the Wusic®family of products. We're
excited to be part of your growing family and the joy
of your new baby. This guide will show you how to
use your Womb Music to listen to the sound of your
baby's heartbeat....music to a new mommy's ears.
The Components
WMCompact Earbud
(2) Sets Splitter Computer Recording
Cable
For simplicity of operation the unit is easy to assemble. Carefully
inspect each item as it is unpacked for any signs of damage that
may have occurred during shipment. If any item is found to be
damaged, please contact Wusic ®Customer Service immediately.
Page 5 of 20

Womb Music by Wusic ® WMCompact
Unit Appearance
Controls and Indicators
On/Off/Volume Dial - Used to power on or off the monitor and to
change the Audio Out volume to the earbuds.
Power On Indicator -When lit, shows that the unit is turned on.
Headset Jack - Used to connect one earbud set or the splitter to
connect two earbud sets.
Computer Jack - Used to connect the unit to a recording device.
Baby Heartbeat Receiver - The part that touches the mommy's
belly to detect the sounds of the baby's heartbeat, kicks and
movements.
Battery Cover - Used to access the battery.
Page 6 of 20

Womb Music by Wusic ® WMCompact
Step One:Insert the Battery
Open the battery cover, remove the protective clear
wrapper from the battery and connect securely to the
battery clip, then replace the cover as shown below.
Replacing the battery cover:
1. When putting the batteryback into the monitor, run the
wires down the right side between the battery clip and the
inside wall with the clip end of the battery now located at
the bottom of the monitor (opposite the On/Off/Volume dial).
This allows the battery to sit lower in the compartment so
the battery cover will close easier and more fully.
Page 7 of 20

Womb Music by Wusic ® WMCompact
2. Now snap the battery into the opening pushing it down until
the clip holds the battery in place.
3. Now take the nose of the cover (the end nearest the
On/Off/Volume dial), hold it at a 45 degree angle to the
monitors body and put the tip into the hole.
4. Slide the cover down towards the bottom until it stops while
still keeping the cover at a 45 degree angle.
5. Now lay the cover flat to the body with the 3 other tabs in
their respective holes. There should be a slight gap
between the top of the cover and the monitor’s body.
6. Now slide the cover towards the On/Off/Volume dial until it
snaps into place and the gap is now closed.
Additional Battery Notes:
·Be sure to remove the battery’s protective clear wrapper
before installing it in the monitor.
·If the Monitor stops working, or won’t turn on, please replace
the battery with a new fresh battery.
·Keep the battery in a cool and dry environment when not in
use.
·Remove the battery from the unit if you do not anticipate using
it for long periods of timeto protect both the monitor and the
battery.
·The Battery Type is an Alkaline 9 Volt
·Please dispose of battery properly when it looses power.
Page 8 of 20

Womb Music by Wusic ® WMCompact
Step Two: Connect the Headset
We know what an incredible experience it is to be able to
listen to your baby's heartbeat and we know it's even more
fun to be able toshare that experience.
So we've made it easy for one or two people to listen to the
baby's heartbeat at the same time by including everything
you need to have that shared experience.
Single Listener - Connect one earbud set to the headset
jack.
Double Listener - Connect the splitter to the headset jack
first, and then connect each earbud set to one of the
splitter's output jacks
Some users may even wish to use their own speakers or
high quality headsets. Simply connect your own speakers
to the unit using a standard 3.5 mm stereo audio jack.
Page 9 of 20

Womb Music by Wusic ® WMCompact
Step Three:
Lubricant Provides a Pleasant Experience
We recommend the liberal use of Ultrasonic, Aloe Vera or
Personal Lubricant (KY™) gel to reduce the static caused
by moving the monitor around on the belly. Baby Oil,
Coconut Oil, Virgin Olive Oil or even Vaseline work well
which is also readily available in most homes. Really
anything that lubricates the movement across your belly
will work. We do however suggest that you don't use
colored gels or lotions.
Caution: Be sure not to get lubricant into the area around
the On/Off/Volume dial as this could damage the unit.
Step Four:Listening to the Baby's Heartbeat
1. Always check the monitor on your own heartbeat first to
make sure everythingis connected and working
properly. Refer to the FAQs if it isn’t before proceeding.
2. We recommend the mother be in a reclining position for
easiest detection of the baby's heartbeat.
3. Apply a generous amount of lubricating gel to the
receiver and to the mother's abdomen.
4. Power on the unit with the On/Off/Volume dial. The
indicator light will illuminate to indicate it is on.
5. Hold the receiver to the mother's heart first to hear how
it sounds so it's easier to distinguish from the baby.
Page 10 of 20