X-PLUS VAMPIRELLA 411 User manual

Right Upper Arm
Halves
(#11) (#12)
Hair Parts
(#1) (#2) (#3)
Head Halves
(#4) (#5)
Right Earring
(#6) Left Earring
(#7)
Collar
(#8)
Front Body Half
(#9)
Rear Body Half
(#10)
Right Front Arm
Halves
(#13) (#14)
Right Hand Finger
(#15) Left Arm Halves
(#16) (#17)
Right Back Thigh
(#18)
Right Front Thigh
(#19)
LEft Front Thigh
(#21)
Left Back Thigh
(#20)Right Upper Boot
(#22) (#23)
Right Lower BooT
Right HALF
(#24)
Right Lower BooT
Left Half
(#25)
Right Boot
Bottom
(#26)
Left Lower BooT
Left Half
(#30)
Left Upper Boot
(#27) (#28)
Left Lower BooT
Right HALF
(#29)
Left Boot
Bottom
(#31)
Hanging
Bat Halves
(#35) (#36)
Base
(#34)
Front Gravestone
(#32)
Back Gravestone
(#33 )
Bat
(#37)
Gold
Red
GOLD
Black
Black
Black
Black
Black
Black
Black
Black
Gold
GOLD
GOLD
GOLD
Light Peach
Black
White
Gray
Gray
Gray
Dark Brown
Dark Brown
LEaf Green
Light Peach
Light Peach
Light Peach
Light Peach
Light Peach
Light Peach
Light Peach
Light Peach
Light Peach
Light Peach
FIG. 1
®
MODEL SCALE
1/8
Actual Size
For suggested detail painting
scheme-see illustrations.
Paint parts as indicated and allow to
dry before assembling.
FIG. 2
Step 1 - Assemble part #4 to part #5. You
may want to paint the face at this point.
Step 2 - Assemble part #1, #2, and #3 to
form the hair assembly. Paint hair at this
point.
Step 3 - Slide part #8 on to the neck and
carefully slide between hair assembly.
Paint collar before assembly.
Step 4 - Assemble body halves #9 and #10
together. Consider painting Vampirella’s
suit at this time.
Step 5 - Assemble upper arm halves #11 and
#12. At this time assemble forearm sections
#13 and #14, then plug in #15 fingers. Attach
upper and lower arm.
STEP 6 - Assemble left arm parts #16 and #17.
Step 7 - Assemble leg parts #18 and #19, then
#20 and #21.
Step 8 - Take the assembled body from step
4 and attach legs from step 7.
Step 9 - Attach arms to step 8 assembly.
This may be the best time to add any putty if
preferred and paint the flesh tone.
Step 10 - Assemble right boot halves #22
and #23. Add parts #24 and #25, then finish
with part #26 to bottom of assembled boot.
This would be the best time to paint the
finished boot assembly.
Step 11 - Assemble left boot halves #27 and
#28. Add bottom of assembled boot. This
would be the best time to paint the finished
boot assembly.
Step 12 - Attach completed boots to finished
body from step 9.
Step 13 - Carefully paint earrings #6 and #7
then glue in place. Test location before
gluing!
Step 14 - Assemble bat body #36 to bat wings
#35. Paint finished bat and bat #37 at this
time.
Step 15 - Assemble Gravestone parts #32
and #33 with tabs of bats clamped inside as
shown.
Best to test fit! Gravestone assembly, and
base #34 should be painted before
construction.
Step 16 - Place finished gravestone in base
part #34. Place finished figure in holes in
base last.