X-Vision XP1080B User manual

XP1080B
HD IR Waterproof Fixed IP Camera （With Integrated Bracket）
User’s Manual
Version 3.3.1

i
Welcome
Thank you for purchasing our IP camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

ii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. This series product can not support these
two modes at the same time.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series IP camera should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.

iii
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name
Amount
IPC Unit
1
Quick Start Guide
1
12V to 24V Conversion Cable
(For AC 24V series product only)
1
Installation Accessories Bag
1
CD
1

iv
Table of Contents
1General Introduction ..................................................................................................................1
1.1 Overview........................................................................................................................1
1.2 Features.........................................................................................................................1
1.3 Specifications................................................................................................................2
1.3.1 Performance...........................................................................................................2
1.3.2 Factory Default Setup...........................................................................................4
2Structure ....................................................................................................................................11
2.1 Multiple-function Combination Cable ......................................................................11
2.2 Framework and Dimension.......................................................................................12
2.3 Bidirectional talk..........................................................................................................13
2.3.1 Device-end to PC-end........................................................................................13
2.3.2 PC-end to the Device-end..................................................................................13
2.4 Alarm Setup.................................................................................................................13
3Installation..................................................................................................................................15
3.1 Device Installation ......................................................................................................15
3.2 SD Card Installation ...................................................................................................15
3.3 Lens Adjustment.........................................................................................................16
3.4 Bracket Adjustment....................................................................................................17
4Quick Configuration Tool.........................................................................................................18
4.1 Overview......................................................................................................................18
4.2 Operation .....................................................................................................................18
5Web Operation..........................................................................................................................21
5.1 Network Connection...................................................................................................21

v
5.2 Login and Logout........................................................................................................21
6FAQ ............................................................................................................................................24
Appendix Toxic or Hazardous Materials or Elements ...............................................................25

1
1General Introduction
1.1 Overview
This series IP camera integrates the traditional camera and network video technology. It adopts audio
and video data collection, transmission together. It can connect to the network directly without any
auxiliary device.
This series IPC uses standard H.264 video compression technology and G.711a audio compression
technology, which maximally guarantee the audio and video quality.
It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.
It supports real-time monitor and listening at the same time. It supports analog video output and dual-
way bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
IPC is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
Different user rights for each group, one user belongs to one group.
The user right shall not exceed the group right.
Storage
Function
Support central server backup function in accordance with your configuration and
setup in alarm or schedule setting
Support record via Web and the recorded file are storage in the client-end PC.
Support built-in SD card.
Do not support local SD card hot swap storage function. Support short-time
storage when encounter disconnection.
Support network storage function such as FTP.
Alarm
Function
Real-time respond to external on-off alarm input, and video detect as user pre-
defined activation setup and generate corresponding message in screen and
audio prompt(allow user to pre-record audio file)
Real-time video detect: motion detect, camera masking.
Network
Monitor
IPC supports one-channel audio/video data transmit to network terminal and then
decode. Delay is within 270ms (network bandwidth support needed)
Max supports 20 connections.
Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
Support web access.
Network
Management
Realize IPC configuration and management via Ethernet.
Support device management via web or client-end.
Power
External power adapter DC12V/AC 24V. You can select according to your actual
environments. Please note system can not support these two types of power
supplying at the same time.
Assistant
Function
Log function
Support system resource information and running status real-time display.

2
Day/Night mode auto switch.
Built-in IR light. Support IR night vision.
Support picture parameter setup such as electronic shutter and gain setup.
Backlight compensation: screen auto split to realize backlight compensation to
adjust the bright.
Support video watermark function to avoid vicious video modification.
The enclosure conforms to the IP 66 protection. Has the waterproof function.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for IPC performance specification.
Model
Parameter
HFW3300C
HFW3200C
HFW3202C
HFW3100C
HFW3101C
System
Main Processor
TI Davinci high performance DSP
OS
Embedded LINUX
System
Resources
Support real-time network, local record, and remote operation at the same
time.
User Interface
Remote operation interface such as WEB, DSS, PSS
System Status
SD card status, bit stream statistics, log, and software version.
Video Parameter
Image Sensor
1/2.8-inch CMOS
1/3-inch CMOS
Pixel
2080(H)*155
3(V)
1920(H)*1080(V)
1280(H)*960(V)
Day/Night Mode
Support day/night mode switch and IR-CUT at the same time. (The lens
has built-in IR-CUT mechanical component.).
Auto Aperture
DC drive
Gain Control
Fixed/Auto
White Balance
Manual/Auto
BLC
On/Off
Off/BLC/WD
（Value:1-
100）
Exposure Mode
Manual/Auto
PAL: It ranges from 1/3 to 1/10000
NTSC: It ranges from 1/4 to 1/10000
Video
Compression
Standard
H.264/JPEG/MJPG
Video Frame
Rate
PAL:
Main stream
（3M@15fp
s,1080P@2
5fps,SXGA
@25fps,
1.3M@25fps
,720P@25fp
s,704*576@
25fps）
Extra stream
(704*576@2
5fp,
352*288@2
5fps)
PAL:
Main stream
(1080P@25fps,
SXGA@25fps,
1.3M@25fps, 720P@25fps,
704*576@25fps），
Extra stream
(704*576@25fps,
352*288@25fps)）
PAL：
Main stream
(1.3M@25，720P@25fps，
704*576@25fps）
Extra stream
(704*576@25fps ，
352*288@25fps)

3
NTSC:
Main stream
（3M@15fp
s ,1080P@3
0fps,
SXGA@30fp
s,
1.3M@30fps
,
720P@30fp
s,
704*480@3
0fps），
Extra stream
（704*480@
30fps,352*2
40@30fps）
NTSC:
Main stream
（1080P@30fps,
SXGA@30fps,
1.3M@30fps, 720P@30fps,
704*480@30fps），
Extra stream
（704*480@30fps,352*240
@30fps）
NTSC:
Main stream：
（1.3M@30fps,
720P@30fps,
704*480@30fps）
Extra stream
（704*480@30fps,352*240
@30fps）
Video Bit Rate
H.264: 56Kbps-8192Kbps.
ＭJPEG is adjustable and bit rate is adjustable.
Support customized setup.
Video Flip
Support mirror.
Support flip function.
Snapshot
Max 1f/s snapshot. File extension name is JPEG.
Privacy Mask
Supports max 4 privacy mask zones
Video Setup
Support parameter setup such as bright, contrast.
Video
Information
Channel title, time title, motion detect, camera masking.
Lens
Manual zoom 3.3-
[email protected]
Motorized
zoom 3-
[email protected]
Manual
zoom 3.3-
12mm@F1.
4
Manual
zoom 2.8-
12mm@F1.
4
Lens Interface
Φ14 interface. Lens is the default accessories
Audio
Audio Input
1-channel. RCA
Audio Output
1-channel. RCA
Bidirectional
Talk Input
Reuse the first audio input channel
Audio Bit Rate
16kbps 16BIT
Audio
Compression
Standard
G.711a/G.711u/PCM
Video
Motion Detect
396 (18*22) detection zones；sensitivity level ranges from 1 to 6 (The 6th
level has the highest sensitivity)
Activation event: alarm device, audio/video storage, image snapshot, log,
email function and etc.
Alarm Input
2-channel input，1-channel output
Record and Backup
Record Priority
Manual>External alarm >Video detect>Schedule
Local Storage
Support Micro SD card storage
Storage
Management
Support display local storage status
Netw ork
Wire Network
1-channel wire Ethernet port, 10/100 Base-T Ethernet
Network Protocol
Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP,
SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour, SNMP.

4
Remote
Operation
Monitor, PTZ control, system setup, file download, log information,
maintenance , upgrade and etc.
AUX
Interface
Video Output
1-channel analogue video output，BNC port.
Restore Default
Setup
Reset button
Power
Support AC24V/DC12V power. (Cannot support these two modes at the
same time.)
General Parameter
Power
Consumption
8W MAX (10W MAX when ICR switch)
Working
Temperature
-10℃~+60℃
Working
Humidify
10%~90%
Dimensions(mm)
φ104*306.7
Weight
1250g（Excluding box）
Installation
Bracket is included in the accessories bag.
1.3.2 Factory Default Setup
Please refer to the following sheet for factory default setup information.
Setup
Item
Default Setup
HFW330
0C
HFW320
0C
HFW3202
C
HFW310
0C
HFW310
1C
Camera
Conditions
Brightness
50
Contrast
50
Hue
50
Saturation
50
Gain Mode
Auto
Gain Adjust
80
Exposure Mode
Auto
Auto Iris
On
Scene Mode
Auto
Day/night Mode
Auto
BLC
Off
WDR
Mirror
Off
Flip
Off
Video
Video bit stream
Main
Stream
Bit stream
type
General
Encode
mode
H.264
Resolution
1080P（1920*1080）
1.3M
（1280*960
）
720P
（1280*720
）
Frame Rate
（FPS）
PAL:25
NTSC:30
Bit Rate
Type
CBR
Recommen
3584-8192 Kb/S