X-Vision XSD27ZS User manual

High Resoluon 600 TVL
Speed Dome CCTV Camera
27x Opcal Zoom
User Manual
XSD27ZS

1
Contents
1. OVERVIEW
1.1 BRIEF INTRODUCTION AND APPLICATION .........................................................
1.2 PRODUCT FEATURES ....................................................................................
1.3 TECHNICAL INDICATORS ................................................................................
2. HARDWARE INSTALLATION ...............................................................................
2.1 ADDRESS SETTING .......................................................................................
3. OPERATION INSTRUCTION ................................................................................
3.1 MAPPING TABLE FOR PRESET LOCATION .........................................................
3.2 KEYBOARD OPERATION ...............................................................................
3.2.1 PRESET LOCATION SCAN .....................................................................
3.2.2 AREA SCANNING ...............................................................................
3.2.3 PATTERN SCANNING ..........................................................................
3.3 MENU SET .................................................................................................
3.3.1 BASIC MENU OPERATION ....................................................................
3.3.2 MENU SET ........................................................................................ 13
3.3.3 SYSTEM INFORMATION ......................................................................
3.3.4 CAMERA SETTING ..............................................................................
3.3.5 AUXILIARY SETTING ............................................................................
3.3.6 SCANNING SET .................................................................................. 15
3.3.7 TITLE SET ..........................................................................................
XSD27ZS - Operang Manual
5
5
5
6
6
8
8
11
11
12
12
13
13
13
14
15
15

XSD27ZS Operang Manual
2
Contents
4. TROUBLESHOOTING .......................................................................................
3.3.8 ALARM LINKAGE ............................................................................... 15
3.3.9 DEFAULTED SETTING .........................................................................
XSD27ZS - Operang Manual
4.1 TROUBLESHOOTING TABLE ...................................................................
16
16
16

XSD27ZS Operang Manual
3
SAFETY CAUTION
WARNING: User shall be reminded to avoid the risk including potenal deaths or severe
injuries.
1. Please refer to the ambient requirement for equipment when installaon; do not install this
equipment in the environment with too much moisture, dust and smoke dust (which may result
in fire or electric shock).
2. In case that this equipment emits abnormal smell or smoke, please immediately stop it, shut
off the power and contact the supplier (otherwise this equipment may result in fire or electric
shock).
3. During cleaning this equipment do not directly spray water on any part of this equipment
(which may result fire or electric shock).
4. Please do not place this equipment near a heat source (otherwise, a fire risk is potenal).
5. It is forbidden to store, install and use this product in danger areas with inflammable or
explosive substances.
NOTICE: Please carefully read the instrucon book before installaon.
1. During transportaon, storage and installaon, heavy load, violent vibraon and immersion
shall be prevented to avoid the damage of the equipment.
2. Before moving or re-installing this equipment, please be sure that the power is shut off.
3. This equipment shall be installed at the site with good venlaon.
4. In case that this equipment does not work normally, please contact supplier and do not
disassemble or reform this equipment (Xvision will not take any responsibility for the problem
resulted from unapproved reformaon or repair).
5. During cleaning the surfaces of this equipment, do not use chemical cleaning agent which
may result in the deformaon of equipment surface or damage of covering layer.
6. It is important that the dome camera is not le in a posion where the camera is poinng
directly at the sun or other extremely bright light source. This may result in CCD damage and
poor image quality.
XSD27ZS - Operang Manual

4
1OVERVIEW
As a high-end monitoring product, the integrated smart high-speed dome camera features strong,
stable and reliable funcon, easy operaon and installaon, etc. It has a good cost performance,
and has become the mainstream product in monitoring industry.
This camera has many funcons such as fast trace, 360° unlimited rotaon, 180°automac
overturn, areas can preset locaon scan, paern scan, screen menu, etc.
The remote head is driven by a stable and reliable step motor that has several speeds.
The camera is designed to watch a moving target in a large area and is a performance unit.
Therefore, it is widely used in various areas such as Airports, staons, Supertores, Banks, and
Hospitals.
1.2 PRODUCT FEATURES
Supporng CVBS standard definion video signal output
Driven by accurate step motor, with stable running and low noise
Up to 255 programmable preset locaons
Several scan modes such as area scan, preset locaon scan, paern scan, etc.
Mul-funcon Chinese-English menu with flexible and easy configuraon
Vercal and automac over turn funcon can realize the connuous watch without
blind area
Telephoto and limit speed funcon provides a clear and stable monitoring picture
Self-adapve baud rate and communicaon protocol
Non-polarity RS485 supports broadcast address and so address
Supporng failure detecon indicaon for RS485 communicaon
IP66 Protecon grade: IP 66
Ultra lowpower consumpon and ultra-strong stability
1.1 BRIEF INTRODUCTION AND APPLICATION
XSD27ZS - Operang Manual

5
1.3 TECHNICAL INDICATORS
No. ItemTechnical Indicator
1Video standard PAL/NTSC
2 Horizontalrotaon scope360° connuous rotaon
3Vercalrotaon scope0° ～90°automac overturn
4Horizontaloperaon speed 0.1～300°/s
5Vercal operaon speed 0.1～240°/s
6Prese locaon running
speed300°/s
7Preset locaon accuracy ±0.10°
8Preset locaons255
9Menu operaon Supporng mul language(Chinese and English)
10Funcon display
Yes
11 Coordinatedisplay Yes
12 Communicaon Failure
detecon and indicaon
Yes (errorindicaons such as baud rate error,address error,
protocol unmatched, etc.)
13 Editablearea to beblocked8 areas
14 Preset locaon scan4(32 preset locaons foreachroune)
15 Rounescan4(leand right boundaries, speedand area namecan beset)
16 Paern scan4(there are no less than200 instrucons foreachroune)
17 Watch locaon funcon
Yes
18 Timing running Supporng 8meintervals
19 Integratedprotocol PELCO-D,PELCO-P,Industrialprotocol, DH-SD1,YAAN
self-adapon
20Communicaon baud rate2400/4800/9600/19200 bps
21 RS485 Supporng non-polarity
22 Telephoto and limit speed Yes
XSD27ZS - Operang Manual

6
No. ItemTechnical Indicator
23 Power-off memory Yes
24 Screen freeze Yes
25 Compable camera Automac Idenficaon (LG/SONY/HITACH/CNB/SAMSUNG)
26 Protecon grade IP66
27 Lighning protecon 4000V
28 Working temp -35
°C ～+35 °C
2HARDWARE INSTALLATION
Address Dial Switch: when the so address is closed, the dome address will be
determined by the dial switch.
So Address: Aer the So address opon is opened, the address dial switch will not
work. The default so address will also be closed.
Broadcasng Address: the fixed broadcasng address of dome if 100; no maer how
the dome address is set, key DVR is able to control the dome through 100 addresses.
Address seng
The address of dome can be set in three ways:
XSD27ZS - Operang Manual

XSD27ZS Operang Manual
7
Address 1 2 345678
0
1 ON OFF
2 OFF ON
3 ON ON
4 OFF OFF
5 ON OFF
6 OFF ON
7 ON ON
.
.
.
250OFF ON
251 ON ON
252 OFF OFF
253 ON OFF
254 OFF ON
255 ON ON
Comparison list of address dial switch:
OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
OFF ON ON ON ON ON
OFF ON ON ON ON ON
ON ON ON ON ON ON
ON ON ON ON ON ON
ON ON ON ON ON ON
ON ON ON ON ON ON
XSD27ZS - Operang Manual

XSD27ZS Operang Manual
8
3. OPERATION INSTRUCTION
3.1 MAPPING TABLE FOR PRESET LOCATION
Preset Locaon Funcon
95+CALL Entering themain menu
XXX+PRESET Saving some preseng point
XXX+CALL Calling some preseng point
40+CALL Operang thefirst groupof preset locaon scanning
41+CALL Operang thesecond groupof preset locaon scanning
42+CALL Operang thethird groupof preset locaon scanning
43+CALL Operang thefourth groupof preset locaon scanning
44+CALL Seng theleboundary of area scanning 1
45+CALL Seng the right boundary of area scanning 1
46+CALL Seng theleboundary of area scanning 2
47+CALL Seng the right boundary of area scanning 2
48+CALL Seng theleboundary of area scanning 3
49+CALL Seng the right boundary of area scanning 3
50+CALL Seng theleboundary of area scanning 4
51+CALL Seng the right boundary of area scanning 4
52+CALL Operang area scanning 1
53+CALL Operang area scanning 2
54+CALL Operang area scanning 3
55+CALL Operang area scanning 4
56+CALL Starng theseng of paern scan
57+CALL Saving theseng ohefirst groupof paern scanning
XSD27ZS - Operang Manual

9
58+CALL
59+CALL Saving the seng of the third group of paern scanning
60+CALL
61+CALL Operang thefirst groupof paern scanning
62+CALL Operang thesecond groupof paern scanning
63+CALL Operang thethird groupof paern scanning
64+CALL Operang thefourth groupof paern scanning
65+CALL Starng 360° connuous rotaon
67+CALL Arming of alarming input1(forthemachines with this
funcon only)
68+CALL Arming of alarming input2(forthemachines with this
funcon only)
69+CALL Disarming of alarming input1(forthemachines with
this funcon only)
70+CALL Disarming of alarming input2(forthemachines with
this funcon only)
71+CALL Starng alarming output (forthemachines with this
funcon only)
72+CALL Closing alarming output (forthemachines with this
funcon only)
75+CALL Starng thedisplay of status column
76+CALL Closing thedisplay of status column
77+CALL Starng vercalflip
78+CALL Closing vercalflip
79+CALL Starng guarding funcon
80+CALL Closing guarding funcon
81+CALL Starng the privacy shelter grid(forthemachines with
this funcon only)
Saving the seng of the third group of paern
scanning
Saving the seng of the third group of paern
scanning
XSD27ZS - Operang Manual

10
82+CALL Closing the privacy shelter grid(forthemachines with
this funcon only)
83+CALL Starng backlight compensaon (forthemovement with
this funcon only)
84+CALL Closing backlight compensaon (forthemovement with
this funcon only)
85+CALL Starng imagefreezing funcon(forthemovement with
this funcon only)
86+CALL Closing imagefreezing funcon(forthemovement with
this funcon only)
87+CALL Starng imagemirrorfuncon(forthemovement with
this funcon only)
88+CALL Closing imagemirrorfuncon(forthemovement with
this funcon only)
89+CALL Automac color-to-black funcon(forthemovement
with this funcon only)
90+CALL Starng color-to-black funcon(forthemovement with
this funcon only)
91+CALL Closing color-to-black funcon(forthemovement with
this funcon only)
92+CALL Closing widedynamic(forthemovement with this
funcon only)
93+CALL Automac widedynamic(forthemovement with this
funcon only)
94+CALL Manual widedynamic(forthemovement with this
funcon only)
95+CALL Entering themain menu
97+CALL Starng image rollover(forthemovement with this
funcon only)
98+CALL Closing image rollover(forthemovement with this
funcon only)
101+CALL Defaulted seng
102+CALL Switch manual operaon speed (fast, slow and medium)
XSD27ZS - Operang Manual

11
103+CALL Switching linearscanning speed (fast, slow and
medium)
105+CALL Starng digital zoom
106+CALL Closing digital zoom
107+CALL 、108+CALL
109+CALL Starng communicaon fault indicaon
110+CALL Closing communicaon fault indicaon
3.2 KEYBOARD OPERATION
Set preset locaon scan: Preset locaon scan roune can be set using 2 ways:
See ‘Menu set -> Scan Set’
There are a total of 4 preset locaon rounes and 32 preset locaons that can be set. The
40th and 43rd preset locaons are in turn used to set and call the 1st and 4th preset
locaon rounes:
1) Execute the command of seng 40th preset locaon to enter the set status
2) Call the desired set opon to the preset locaon in rounes, such as the first, the second,
etc.
3) Wait a desired me to stay (the interval me between two locaon), and do not
conduct any operaon.
4) Call next roune that you want to set to preset locaon. If there are unused preset
locaon, add it into roune, execute in looping way the 3) and 4), or execute 5) and the
set is over.
5) Execute the command of seng 40th preset locaon, and save the set and exit in
addion to calling preset locaon. Execung any command other than, such as up, down,
right or le does not need to be saved before exit.
Run preset locaon scan: call 40th - 43rd preset locaons to run 1st-4th group preset scan
locaon series.
3.2.1 PRESET LOCATION SCAN
1.
2.
Calling 107followed by 108 and restarng thedome
XSD27ZS - Operang Manual

12
There are two ways to set the area of scanning.
Using special preset locaon order
Seng of the le boundary: dome is controlled to ideal posion and preset locaon
44 is called to set the le boundary of Region 1
Seng of the right boundary: dome is controlled to ideal posion and preset locaon
45 is called to set the right boundary of Region 1
Using keyboard for seng
Menu set -> scan set -> area scanning
Seng of the le boundary: control the dome to ideal posion and press ‘OPEN’ key
to set the le boundary or Region 1
Seng of the right boundary: control the dome to ideal posion and press ‘OPEN’ key
to set the right boundary of Region 1
4 area scanning can be set and the method is the same.
Seng of scanning speed: see ‘menu set -> auxiliary set’
Seng of regional tle: see ‘menu set -> tle set’
Operang area scanning
Call the preset locaon 52-55 to operate area scanning path 1-4 respecvely
Dome rotates between the set right and le boundary according to the set speed and
the screen displays the corresponding regional tle.
3.2.2 AREA SCANNING
Seng of paern scanning
1. Call preset locaon 56 to start seng paern scanning
2. Operate ‘up, down, le, right, WIDE, TELE, NEAR, FAR, CLOSE and OPEN on the dome.
3. Call preset locaon 57-60 to save the 1-4 paern scanning
Operaon of paern scanning
Call the preset locaon 61-64 to operate paern scanning path1-4 respecvely
3.2.3 PATTERN SCANNING
XSD27ZS - Operang Manual

XSD27ZS Operang Manual
13
1. Press control keyboard or use matrix to execute the command of ‘call 95th preset
locaon’ to enter and set main menu
2. Aer the main menu page appears, press ‘up or down’ icon to move the cursor to the
submenu opon to be set and press ‘right’ icon to enter this submenu seng page
3. Aer submenu page appears, press ‘up or down’ icon to move the cursor to the opon
to be set and press ‘right’ icon to change or set the content of this opon
4. The contents normally fall into 2 types; Digit type and List Type. The blink indicaon
means that the content of the opon can be changed.
For Digit type: press the 'le or right' icon to select the input locaon, press 'up or down
icon to modify the value. To confirm and quit the opon seng, move the cursor to the
last digit and press 'right'.
For List type; press 'up or down' to modify the content of opon and press 'right' to
confirm and quit the opon seng.
3.3.1 BASIC MENU OPERATION
3.3 MENU SET
MAIN MENU
1. System Informaon: Check dome informaon (such as version, address, communicaon,
etc.)
2. Camera Seng: Set the camera parameters
3. Privacy Shelter: Set the parameters for privacy masking
4. Auxiliary Seng: Set some auxiliary parameters of the dome
5. Scanning Seng: Set the scan sequence of preset locaon
6. Title Seng: Set regional tle by input method
7. Alarm Linkage: Alarming seng
8. Defaulted Seng: Recovery the defaulted seng of the dome
9. Exit: Exit the main menu
3.3.2 MENU SET
1. Version No. : The version number of the dome fixed ware
2. Address: Dome address to be set by dial switch
3. Communicaon: Communicaon Baud rate
4. Protocol: Communicaon protocol PELCO-D
3.3.3 SYSTEM INFORMATION
XSD27ZS - Operang Manual

XSD27ZS Operang Manual
14
5. Camera : Display the movement type of camera
6. Date of Manufacture: August 2012
7. Manufacturer: Xvision
8. Exit: Exit the sub menu of system informaon
1. Zoom Speed: Fast, medium and slow
2. Digital Zoom: On and off
3. White Balance: Automac
4. R gain: 1-225 (white balance manually effecve)
5. B gain: 0-225 (white balance manually effecve)
6. Exposure Seng: 0-7
7. Backlight Compensaon: On and off
8. Image Freezing: On and off
9. Wide Dynamic Mode: Automac, off and manual
10. Wide Dynamic Level: 0-128 (wide dynamic manually effecve)
11. Image Mirror: On and off
12. Colour-to-black seng: Automac, on and off
13. Image Effect: Off, inverse colour and white-band-black
14. Image Rollover: On and off
15. Camera Display: On and off
16. Minimum Focus: 1cm, 10cm, 30cm and 100cm
17. Save: Save the sengs and exit sub menu
18. Exit: Exit the sub menu without saving the modificaon
3.3.4 CAMERA SETTING
1. Area Scanning Speed: Fast, medium and slow
2. Manual Rotaon Speed: Fast, medium and slow
3. Guarding Posion: Preset locaon 0-225 (0:closing the guard posion)
4. Recall Time: Set the me for automac recall and duraon when it will not be controlled
or return to the guard posion me: 0-225s
5. Vercal Automac Rollover: Dome 180° automac rollover on/off
6. Seng of Status Bar: On and Off
3.3.5 AUXILIARY SETTING
XSD27ZS - Operang Manual

XSD27ZS Operang Manual
15
7. Language Seng: English and Chinese
8. So Address On and Off: On and Off
9. So Address: 001-255
10. Exit: Exit the sub menu without saving the modificaon
11. Save: Save the sengs and exit sub menu
1. Seng of Area Scanning: Region No. (0-4)
2. Operang Area Scanning: Region No. (0-4) 0 means the scanning without linking area
scanning number
3. Seng Preseng Scanning: Preset locaon No. (0-225)
4. Operang Preseng Scanning: Preset locaon No. (0-225) 0 means the scanning
without linking preseng
5. Seng of Mode Scanning: Mode No. (0-4)
6. Operang Mode Scanning: Mode No. (0-4)
7. Exit: Exit the sub menu without saving the modificaon
3.3.6 SCANNING SET
1. Region No. : 1-4
2. X Co-Ordinates: X posion of tle on the screen (0-29)
3. Y Co-Ordinates: Y posion of tle on the screen (0-14)
4. The tle content in the current region. To change, move 'le and right' and select
characters. Move 'down' to confirm changes or move 'up' to exit this opon
5. Mode: Input method mode (capitalized and low case characters, symbols, number and
Pinyin)
6. Delete: To delete the characters in the insert characters of ‘tle’
7. Exit: Exit the sub menu without saving the modificaon
8. Save: Save the sengs and exit sub menu
3.3.7 TITLE SET
1. Alarm Input: Alarm input No. (1 and 2)
2. Input Type: On and Off
3. Arming Time (Hours: Minutes)
3.3.8 ALARM LINKAGE
XSD27ZS - Operang Manual

XSD27ZS Operang Manual
16
4. Disarming Time (Hours: Minutes)
5. Preseng Scanning: Linkage preset locaon scanning No. (0-4)
0 means the scanning without linking preseng
6. Paern Scanning: Linkage paern scanning No. (04)
0 means the paern scanning without linking
7. Area Scanning: Linkage area scanning No. (0-4)
0 means the area scanning without linking
8. Alarm Output: On and Off
9. Exit: Exit the submenu without saving the modificaon
10. Save: Save the sengs and exit submenu
Cancel: Cancel and exit the sub menu
Enter: Perform the defaulted seng and exit the sub menu
3.3.9 DEFAULT SETTING
4TROUBLESHOOTING
Phenomenon Possible Cause Countermeasures
Power damageorinsufficient
power
Changeit
Errorconnecon of power
line
Faults of engineering route
Mechanical fault
Inclinedcamera
Insufficient power supply
Normal self-inspecon but no
image
Errorvideolines
Poorvideolineconnecon
Camera damage Changeit
No acon or image aer
electrifying Correct it
Eliminate it
Inspect it
Adjust it
Correct it
Eliminate it
Abnormal self-inspecon;
image exists but with motor
noise Change the power complying with
the requirements and put the
switch power near the dome
XSD27ZS - Operang Manual
4.1 TROUBLE SHOOTING TABLE

XSD27ZS Operang Manual
17
Phenomenon Possible Cause Countermeasures
Normal self-inspecon but no
image
Errorvideolines
Poorvideolineconnecon
Camera damage Changeit
Successful self-inspecon but
out of control
Errorconnecon of control
signallineCorrect it
Unmatcheddome address
Too far distance and too large
delay of 485signal
Wire diameter in twisted-pairor
thicker control line
Unstableimage
Poorvideolineconnecon Eliminateit
Insufficient power supply Changeit
If severaldomesare connected in
oneline(centralpower supply),
AC24Vpower connectorof dome
shall beconnectedaccording to the
samedirecon.
Correct it
Eliminate it
Select it again
Adjust the protocol or controller to
make it match and electrify again
Unmatched protocol or
communicaon Baud rate
The video picture on the
monitor rolls vercally in
switching process
Incorrect camera phase
posion
Domepower 1
Domepower 2
Domepower 3
XSD27ZS - Operang Manual