Xact S5 User manual
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
S5-Bluetooth
Bluetooth Standalone Access Control
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
User Manual
Introduction
The S5-Bluetooth is a metal case anti-vandal standalone access control that can be mounted
both indoor and outdoor. The unique feature is can be operated by mobile phone through
Bluetooth or 13.56MHz Mifare Card. The operation is very smart and convenient.
Features:
Vandal resistance enclosure
Waterproof, conform to IP66
One programming relay output
1000 users（including Mifare card and mobile phone user）
Two ways to open the door: Mifare card; Mobile phone.
Can open door by App for android phone(App for IOS will com soon).
Support sending Remote E-key to others: the Administrator can control access time.
Latch mode to hold door or gate open
Multi-color LED status display
Specification：
User Capacity
Card
Mobile
1000
13.56MHz Mifare Card
Android 4.3 above
Operating Voltage
Idle current
Active current
12V DC
≤35mA
≤90mA
Proximity Card Reader
Radio Technology
Card Read range
Mifare Card
13.56MHz
2～6cm
Bluetooth
Range
Reaction
Bluetooth Version:4.0 Above
＜20m（relate to environment）
＜2seconds
Relay
One(NO, NC,Common)
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Lock Output Load
2 Amp Maximum
Environment
Operating Temperature
Operating Humidity
Meets IP66
-20C～+60C
0%～98%
Physical
Dimension
Net Weight
Shipment Weight
Zinc-Alloy Enclosure
L103 X W48 X H19 (mm)
260g
300g
Carton Inventory
S5 Bluetooth
Self Tapping Screws Wall Anchors
Screw Driver Diode 1N4004 (For relay circuit protection)
Installation
Drill 2 holes(A,C) on the wall for the screws and one hole for the cable, Thread the cable
through the cable hole(B)
Knock the rubber bungs to the screw holes(A,C),Fix the back cover firmly on the wall
with 4 flat head screws
Attach the unit to the back cover.
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Wiring
No.
Color
Function
Notes
1
Green
NC
Normally Closed Relay Output
2
Brown
COM
Common Connection for Relay Output
3
White
NO
Normally Open Relay output
4
Black
GND
Negative Pole
5
Red
+12V
Regulated Power Input
6
Yellow
OPEN
Request to Exit input(REX)
Connection Diagram:
Common Power Supply:
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Access Control Power Supply:
APP Operation
(Make sure your Android Device connects to network, and Bluetooth is turn on )
1. Register:
You Will Get An Email From DoorMaster
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Pic 04
Then Register Successfully.
2. Add Device & Set Master USers
Below step is just for Masters, each deivce have only 1 super Master User and 10 Master Users (The
1st user added the device is Super Master User, the 2nd~11th users added the device is Master Users.)
Login the App with your email address and password.
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Slowly press exit button for three times, when Red light shines, operate like below: (If the
Red light didn’t shine, it means the Super Master has been added. Need to Erase All Users
firstly-Referto P.14)
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
When hear one “Beep”, means add device successfully.
(Notice: Super Master and Master should add device at one time, if Masters didn’t be added in
this step, ask Super Master to send the E-Key and set as Master-Refer to P.11)
3. Add Common Users
Register the app as Step1, and then the Super Master or Master send E-key.
Below is Authority for Different Users
Authority
Super Master
User
Master Users
Common Users
Open Door
√
√
√
Change Device Name
√
×
×
Add Card
√
√
×
Delete Card
√
√
×
Send E-Key
√
√
×
Set Relay
Configuration
√
×
×
Set Common Users
as Master User
√
×
×
Important Notice
Press the Right Arrow Key > next to device name to enter configure setting menu (except
change password).
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
4. Add and Delete Card Users by App
Add Card Users
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
When hear one “Beep”, and the Red LED shine once per second, App shows “add by swipe
card”as below, then read the card on reader(Cards can be added continuously).
After one Beep, it means the cards are added successfully, press back to mecu.
Delete Card Users
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
When hear one “Beep”, and the Red LED shine once per second, App shows “delete by swipe card”
as below, then read cards one reader(Cards can be deleted continuously).
After one Beep, it means the cards are deleted successfully, press back to menu.
5. Set Relay Configuration
Lock Control: Set the door open time (Factory Default: 5 seconds)
Electric Control: Set the relay to ON/OFF mode
6. Open door
1. Read the valid user card
2. Open the door by App, login in the App, and touch the device to open the door
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
7. Send E-Key
E-key receivers can be set as master or common user, and the authority can be permanent
or timed.
(Remark: E-key receivers must have registered in App firstly.)
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Pic 20 Pic 21
Visitors will receive a message when they log in.
8. Modify Device Name
9. Change Password
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
10.Device Reset(Method 1)
(Please refer to title OTHERS for Method 2)
This operation only reset the door open time to 5 seconds.
Pic 26 Pic 27
11.Erase ALL Users(Method 1)
(Please refer to title OTHERS for Method 2)
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
Pic 28 Pic 29
12.Delete Device
Pic 30 Pic 31
X
．
act
．．．
C
．
onfidentiality Statement
．．．．．．．．．．．．．．．．．．．．．．．
- The information contained in this file/document is privileged and confidential and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly prohibited. Opinions, conclusions and other information in this message that do not relate to the
official business of Xact Security System, LLP shall be understood as neither given nor endorsed by it.
OTHERS
To Reset to Factory Default(Method 2)
To reset to factory default, power off and press exit button , hold it and power on, release it until
hear one beep and the LED in Red, means reset to default successfully.
Remarks: Reset to factory default, the users’ information is still retained.
Erase ALL Users(Method 2)
After resetting to factory default, 1s later, press exit button , hold it for 10s. Release it until
hear three beeps and the LED in Red, means clear data successfully.
Sound and Light Indication
Status
Light color
Buzzer
Stand By
Red
－
Enter Programming
Red Shine Slowly
Beep－
Operation error and clear device
－
3 Beeps
Open lock
Green
Beep－
Table of contents
