XAG XStation User manual

XStation
Data Processing Device
Quick Start Guide
EN
Version 1.0

-1-
To Users
Dear user, thank you for choosing XAG products.
For safety reasons and to ensure the best experience possible,
XAG recommends that you read through the Quick Start Guide and
Disclaimer in this document before attempting to use the XStation.
Contact Us
If you have any questions about this document, please contact our
Technical Support via email: [email protected]

-2-
Battery adapter
× 1
DC adapter
× 1
Xstation mainframe
×1
List of Items
When opening the product for the rst time, please carefully check
that all the items listed below have been included. Please contact
XAG™ or your dealer if there are any missing items.

-3-
Getting to Know XStation
The main structural components of the XStation are as follows:
Handle
Operation
Buttons
SD Card Slot
Screen
1
2
3
4
Cooling Outlet (one on
each side, 3 sides in total)
Cooling Inlet
(plastic top cover)
Rubber Crash Pad
5
6
7
8
Power Port
1
765
432
8
Settings OK Cancel

-4-
XStation Overview
XStation is a data processing device that automatically processes
aerial survey data collected by Xmission Multifunctional UAS and
generates HD farmland data and digital terrain data. Via A3 Ground
Station, it delivers such data to the P-Series UAS for high-precision
spraying operations.
Operation Buttons
XStation comes with 6 buttons, i.e. ON/OFF, Select (Up/Down),
Settings, OK, and Cancel.
ON/OFF button: Press the ON/OFF button to turn on the Xstation.
Press and hold it for at least 5 seconds to bring up the shutdown/
restart menu. Press the Select buttons to select the operation
required and then press OK.
Select buttons (Up/Down):Press Up/Down to choose the items
displayed on screen.
Remarks: When more than one set of data is imported into XStation,
you may cancel the ongoing processing task and select another set
of data for priority processing via the Select buttons.
Settings button: Press the button to show the settings menu.
Remarks: The settings menu offers functions such as device
information viewing, device pairing, device upgrading, and resetting.
OK button: Press the button to conrm your selection.
Cancel button: Press the button to cancel your selection.
Settings OK Cancel

-5-
Functions
Data processing
After Xmission completes its aerial survey mission and returns,
remove the SD card from the slot under the battery case of
Xmission and insert the card into XStation. The Xstation will then
indicate on its screen that the SD card has been detected and that
data synchronization is undergoing. Remove the SD card after “Data
Synchronized” is displayed on the screen. XStation detects the SD
card when it is inserted, and synchronizes the unprocessed data in
it before processing automatically.
Task switch
When more than one task is imported to XStation, you may choose
the order in which to complete them. To do so, once the automatic
synchronization of data is complete, simply select one of the task
for priority processing using the Select buttons (Up/ Down).
Device pairing
Ground Station: Open Xplanet APP, open up the Settings menu
(located on the left side), and click “Device”-“Add Device” to activate
the Ground Control Station Pairing mode. XStation: Press the
Settings button, select “Pair Device" and press OK button to activate
the XStation Pairing mode. After both devices are activated for
pairing, the Ground Station starts to search for nearby pairable
devices. When the XStation is detected, click the XStation icon to
complete the pairing.
Record
Back Clip
Device
Add Device
Start operation
Land block
Device
Log
Settings
Debug
Operation

-6-
Device management
After the Ground Station and the XStation are paired, some
operations become available via the App, such as viewing HD
farmland data, deleting or reprocessing tasks, managing the Wi-Fi
commectionor storage of the XStation, etc.
Device Device
Communication resuming, please wait for a moment
Add Device Add Device
Searching
XStation XStation
Pair
Back Clip
XStation
XStation
Device
Communication resuming, please wait for a moment
Back Clip
XStation
XStation
Tile Management Remove
All Task
Mode Status
Status
Mode
Hill Resolution Complete
Failed
Mode Resolution
Resolution
Mode
Camera Firmware
Firmware
Camera
Height Speed
Speed
Height
XStation
XStation Data Processing Device

-7-
Icons on Screen
Device Pairing icon: The icon will display when XStation is paired
with Ground Station.
SDCard icon: When XStationdetects a SD card and starts data
synchronization, the icon will display. Please remove the SD
card only after data synchronization is complete and the icon
disappears.
Wi-Fi icon: WhenXStationis connected toWi-Fi, the icon will
display.
Device Upgrading icon: When a system upgrade is available for
XStation, the icon will display.
Upgrading XStation
Online upgrade:
Step 1: Turn on the XStation, then connect the XStation to an
external Wi-Fi or hotspot via A2 Ground Station;
Step 2: After connecting to an external network, the XStationwill
automatically download the latest upgrade pack, and the
upgrade icon will display when the download is complete;
Step 3: Press the Settings button and select System Upgrade to
upgrade the XStation;
Step 4: Upon the completion of upgrade, the XStation will restart
automatically.
Settings OK Cancel
SD
SD

-8-
XStation Data Processing Device
Model: DT 15
Dimensions: 262.5×198×59mm
Weight: 3kg
Waterproof grade: Non-watertight
Operating temperature: -20 ° -45°
Storage temperature: -10 ° -40°
AC Power Adapter
Input: AC 220 V
Output: DC19V8A(MAX)
Power: 100W(MAX)
P20 Power Adapter
Input: P20 Battery
Output: DC19V8A(MAX)
Power: 100W(MAX)
Technical Specications

This Guide is subject to upgrade
without prior notice.
Visit our website for more information
www.xa.com/en
[email protected]
@XAGocial
@XAG_ocial
@XAG Ocial