Xantech 291-95 KITRP User manual

- 1 -
291-95 KITRP
Plasma Friendly Shelf-Top IR Receiver
DESCRIPTION
The 291-95 KITRP comes with everything needed for a complete IR repeater system. The 291 series
are small, shelf-top IR receivers with a multitude of applications. Use them as an inexpensive method
of repeating IR commands when wall-mounting an IR receiver is not practical.
The 291-95 IR receiver is specifically designed and engineered to filter out interference from plasma
displays.
INCLUDED ITEMS
ITEM A: (1) 291-95 Plasma Friendly IR Receiver ITEM B: (1) 784-44 Connecting Block
ITEM C: (4) 283M Mouse Emitters ITEM D: (1) 781RG Power Supply

- 2 -
INSTALLATION INSTRUCTIONS
STEP 1:
Plug in the 2.1mm Coaxial power plug of the 781RG Power Supply (ITEM D) into the jack labeled
12VDC on the 789-44 Connecting Block (ITEM B).
Plug the AC end of the 781RG Power Supply (ITEM D) into an ‘un-switched’ 120V AC Line outlet.
STEP 2:
Plug the 3.5mm stereo mini plug from the 291-95 (ITEM A) into the IR RCVR input on the 789-44
Connecting Block (ITEM B).
STEP 3:
Plug in the 283M Emitters 3.5mm mono mini plug (ITEM C) into the jacks labeled EMITTERS on the
789-44 (ITEM B) and affix the opposite end of the IR Sensor Window of the controlled equipment.
Note: Please see the 291-95 Instruction Manual for proper placement.
XANTECH CORPORATION
13100 Telfair Avenue
Sylmar, CA 91342
Phone [phone] Fax [phone]
www.xantech.com
Part No. 08901687 Rev A 01-30-06
© 2005 Xantech Corporation