Xerox DocuPrint 65 Technical manual

Xerox Document Services Platform Series
DocuTech 65/DocuPrint 65
Installation Planning Guide
701P36055
DocuSP version 2.0.x
January 2001

Xerox Corporation
Global Knowledge and Language Services
800 Phillips Road
Bldg. 845-17S
Webster, NY 14580-9791
© 2001 by Xerox Corporation. All rights reserved
Copyright protection claimed includes all forms and matters of copyrighted material
and information now allowed by statutory or judicial law or hereinafter granted
including without limitation, material generated from the software programs that are
displayed on the screen such as styles, templates, icons, screen displays, looks, and
so on.
Printed in the U.S.A., U.K., and France.
XEROX®, XEROX Europe®, and XEROX Canada Limited®, The Document
Company®, the stylized X, and all names and identifying numbers used in connection
with Xerox products mentioned in this publication are trademarks of XEROX
CORPORATION. All non-Xerox brands and product names are trademarks or
registered trademarks of their respective companies. Other company trademarks are
also acknowledged.
While the information in this Guide is correct at the time of this publication, Xerox
reserves the right at any time to change the information without notice. Changes are
made periodically to this document. Changes and techincal updates will be added in
subsequent editions.

DocuTech 65/DocuPrint 65 1
Table of contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Telephone requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Service requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Canadian industry requirements . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
Electromagnetic comparability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Symbology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
European Union declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . .vi
Electricity at Work Regulation - UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
The Regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii
Check your understanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
Your responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Additional queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Printer power on/off indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Printer or controller - emergency power off . . . . . . . . . . . . . . . . . . . . . . .xiv
Printer - ozone information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiv
Printer - laser safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Printer - operational safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
1. Planning for the installlation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Installation planning responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Xerox responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Customer responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Installation planning tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Before scheduling delivery of the DocuTech 65/DocuPrint 65system
1-4
2. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
If you encounter a problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Table of contents Installation Planning Guide
2 DocuTech 65/DocuPrint 65
Preparing a location for the DocuTech 65/DocuPrint 65 . . . . . . . . . . . . 2-2
Standard equipment location - space requirements . . . . . . . . . . 2-3
Other locations - space requirements . . . . . . . . . . . . . . . . . . . . . 2-4
Product dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Electrical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Telephone line requirments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Relocating the DocuTech 65/DocuPrint 65 . . . . . . . . . . . . . . . . . . . . . . 2-8
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Space requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
3. Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Hardware components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Controller components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Printer components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Paper trays (trays 1-4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Bypass tray (tray 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Haigh Capacity feeder (tray 6) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Peripheral hardware components . . . . . . . . . . . . . . . . . . . . . . . 3-10
Controller software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Modems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
4. Maintenance and support services. . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Xerox support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Customer support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Operator training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Supplies service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Routine maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Meter reading and reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Consumable supplies tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Dry ink (toner) and “dry ink low”message . . . . . . . . . . . . . . . . . 4-9
Supplies checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

DocuTech 65/DocuPrint 65 i
Introduction
The DocuTech 65/DocuPrint 65 Installation Planning Guide contains
information on preparing for the delivery and installation of the Xerox
DocuTech 65/DocuPrint 65 Printer.
About this guide
This guide is intended for the person responsible for coordinating the
installation of the Xerox DocuTech65/DocuPrint 65 printer and controller at
yoursite.Itliststhetasksyouneedtocompletebeforeinstallationcanbegin.
If you are a lead operator, or your job involves some programming and
systems administration tasks, as well as coordinating the install of the
DocuTech 65/DocuPrint 65 system, use the DocuTech 65/DocuPrint 65
Operator Guide to supplement the information in this manual.
Before using this Guide, become familiar with its contents and conventions.
Contents
This section lists the contents of this guide.
•“Introduction”gives a basic overview of the Installation Planning Guide
and its contents. It also contains information on requirements and
certifications required by USA and Canadian regulations.
•“Safety Notes”explains the various symbols, Cautions, and Warnings
pertaining to the safe use and operation of the DocuTech 65/DocuPrint 65
systems. It also contains information on requirements and certifications
required by the European Union Declaration of Conformity and The UK
Electricity at Work Regulation.
•Chapter 1 “Planning for the installation”covers the roles and
responsibilities for site selection and installation of the DocuTech 65/
DocuPrint 65.
•Chapter 2 “Installation”provides electrical and space requirements for the
installation of the DocuTech 65/DocuPrint 65.
•Chapter 3 “Product overview”provides a brief overview of the DocuTech
65/DocuPrint 65 system and components.
•Chapter 4 “Maintenance and supplies”contains information about the
available support services and necessary supplies to maintain the
DocuTech 65/DocuPrint 65, as well as supplies ordering information.

Introduction Installation Planning Guide
ii DocuTech 65/DocuPrint 65
Requirements
Telephone requirements
USA FCC requirements:
1. The FCC has established rules that permit the device to be directly
connected to the telephone network. Standardized jacks are used for
these connections. This equipment should not be used on party lines or
coin lines.
2. If this device is malfunctioning, it may also be causing harm to the
telephone network; this device should be disconnected until repair has
been made. If this is not done, the telephone company may temporarily
disconnect service.
3. The telephone company may make changes in its technical operations
and procedures; if such changes affect the compatibility or use of this
device, the telephone company is required to give adequate notice of the
changes. You will be advised of your right to file a complaint with the FCC.
4. If the telephone company requests information on what equipment is
connected to their lines, inform them of:
a. The telephone number this unit is connected to
b. The ringer equivalence number
c. The USCO jack required
d. The FCC Registration number
Items “b”and “d”are indicated on the label.
The Ringer Equivalence Number (REN) is used to determine how may
devices can be connected to your telephone line. In most areas, the sum
of the RENs of all devices on any one line should not exceed five (5.0). If
too many devices are attached, they may not ring correctly.
Service requirements
In the event of equipment malfunction, all repairs should be performed by
Xerox or authorized agent. It is the responsibility of users requiring service to
report the need for service to Xerox or to an authorized agent. Service can be
obtained at:
Xerox Customer Support
1301 Ridgeview Drive, Bldg. 301
Lewisville, TX 75067
Telephone: [phone]

Installation Planning Guide Introduction
DocuTech 65/DocuPrint 65 iii
Canadian industry requirements
Notice: The Canadian Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operational and safety requirements.
The Department does not guarantee the equipment will operate to the user’s
satisfaction.
1. Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of a certified
connector assembly (telephone extension cord). The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.
2. Repairs to certified equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
3. Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should
contact the electric inspection authority, or electrician, as appropriate.
4. The Load Number (LN) assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop that is
used by the device, to prevent overloading. The termination on a loop
may consist of any combination of devices subject only to the requirement
that the total of the Load Numbers of all the devices does not exceed 100.
For service in Canada call [phone]

Introduction Installation Planning Guide
iv DocuTech 65/DocuPrint 65
Electromagnetic comparability
United States
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
Changes or modifications to this equipment not specifically approved by the
Xerox Corporation may void the user’s authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
This Class “A”digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe “A”est conforme àla norme NMB-003 du
Canada.
European Union
WARNING
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
Changes or modifications to this equipment not specifically approved by
Xerox Europe may void the user’s authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance
with the EMC Directive (89/336/EEC).
WARNING
In order to allow this equipment to operate in proximity to Industrial,
Scientific, and Medical (ISM) equipment, the external radiation from ISM
equipment may have to be limited or special mitigation measures taken.

DocuTech 65/DocuPrint 65 v
Safety notes
Please read the following instructions carefully before planning your install
and/or operating the DocuTech 65/DocuPrint 65. Refer to them as needed to
ensure the safe installation and operation of your equipment.
The safety testing and performance of this product have been verified
using Xerox materials only
Your Xerox DocuTech 65/DocuPrint 65 and its supplies have been designed
and tested to meet strict safety requirements. These include safety agency
examination and approval, and compliance to established environmental
standards.
Follow all warnings and instructions marked on or supplied with the product.
Symbology
Various symbols are used on the printer and in the documentation.
The symbol on the printer that indicates a hot surface is shown in Figure 1.
Figure 1. Hot surface symbol
Another symbol that indicates a heated surface is shown in Figure 2.
Figure 2. Heated surface symbol

Safety notes Installation Planning Guide
vi DocuTech 65/DocuPrint 65
WARNING
Warnings indicate possible serious personal injury if you do not strictly
follow the practice, procedure, condition, or statement that follows the
WARNING.
CAUTION
Cautions indicate that possible system damage or data loss will occur if you
do not carefully follow the practice, procedure, condition or statement that
follows the CAUTION.
European Union declaration of conformity
Approvals and
certification The CE marking applied to this product symbolizes Xerox Europe Declaration
of Conformity with the following applicable Directives of the European Union
as of the dates indicated below.
January 1, 1995: Council Directive 73/23/EEC amended by Council Directive
93/68/EEC, approximation of the laws of the member states related to low
voltage equipment.
January 1, 1996: Council Directive 89/336/EEC, approximation of the laws of
the member states related to electromagnetic compatibility.
A full declaration, defining the relevant directives and referenced standards
can be obtained from your Xerox Europe representative or by contacting:
Xerox Europe Product Safety,
Xerox Europe Technical Centre,
PO Box 17,
Bessemer Road,
Welwyn Garden City,
Herts AL7 1HE, England

Installation Planning Guide Safety notes
DocuTech 65/DocuPrint 65 vii
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
WARNING
This system is certified manufactured and tested in compliance with
strict safety and radio frequency interference regulations. Any
unauthorized alteration which includes the addition of new functions or
the connection of external devices may impact this certification. Please
contact your local Xerox Europe representative for a list of approved
accessories.
Shielded cables must be used with this equipment to maintain
complacence with the EMC Directive (89/336/EEC).
This equipment is not primarily intended for use in a domestic
environment.
WARNING
In order to allow this equipment to operate in proximity to industrial,
scientific and medical (ISM) equipment, the external radiation from the
ISM equipment may have to be limited or special mitigation measures
taken.

Safety notes Installation Planning Guide
viii DocuTech 65/DocuPrint 65
Electricity at Work Regulation - UK
The Electricity at Work Regulation applies only to England and Wales.
The Regulation
The Electricity at Work Regulation 1989 came into force in England and
Wales on the 1 April 1990. This 1989 Regulation places a duty on all
employers and self-employed persons to ensure the electrical systems in their
premises are constructed, maintained and operated in such a manner as to
prevent, so far as reasonably practical, danger. This includes ensuring all
electrical equipment connected to such electrical systems are safely
constructed, maintained and operated.
All Xerox equipment have been designed to exacting safety standards. They
have all undergone a variety of stringent safety tests including earth bond,
insulation resistance and electrical strength tests. Xerox Europe
manufacturing plants have been awarded ISO 9000 quality certification and
are subject to regular audits by the British Standards Institution or equivalent
national standards body.
Xerox equipment which has been properly and regularly serviced and
maintained should not have to undergo additional specific safety tests
pursuant to the 1989 Regulation. Customers wishing to complete safety
testing should contact Xerox Europe Technical Centre for advice prior to any
test implementation. The address of the Xerox Technical Centre is provided in
the previous section, European Union declaration of conformity.
Xerox equipment should, however, be properly and regularly serviced and
maintained at all times.

Installation Planning Guide Safety notes
DocuTech 65/DocuPrint 65 ix
Check your understanding
Please review the questions and answers that follow to ensure that you
understand the Electricity at Work Regulation in England and Wales.
Question What is the Electricity at Work Regulation?
Answer The Electricity at Work Regulation 1989 came into force in England and
Wales on the 1 April 1990. This 1989 Regulation places a duty on all
employers and self-employed persons to ensure the electrical systems in
their premises are constructed, maintained and operated in such a manner as
to prevent, so far as reasonably practicable, danger. This includes ensuring all
electrical products connected to such electrical systems are safely
constructed, maintained and operated.
Question Does Xerox Europe comply with the Electricity at Work Regulation?
Answer The regulation places a duty on all employers and self-employed persons
to ensure the electrical systems in their premises are, effectively safe.
This regulation does not impose on, amongst others, manufacturers or
suppliers of such electrical systems. However, rest assured that all Xerox
equipment which Xerox Europe and its authorized distributors supply to
customers, conform with all the relevant safety legislation and standards.
Question Is Xerox equipment safe?
Answer All Xerox equipment supplied by Xerox Europe and their authorized
distributors conform to all relevant safety legislation and standards.
Question Is the Xerox equipment in my premises safe?
Answer All Xerox equipment supplied by Xerox Europe and their authorized
distributors conform to all relevant safety legislation and standards. However,
like all electrical equipment, they have to be regularly serviced and
maintained by competent persons.
Xerox Europe Customer Service Engineers ensure Xerox equipment is
serviced and maintained to exacting Xerox safety standards. If you would like
your Xerox equipment to be serviced and maintained to such high standards,
please contact your local Xerox Europe Customer Service Organization. They
will be pleased to assist you.

Safety notes Installation Planning Guide
xDocuTech 65/DocuPrint 65
Question Does the Xerox equipment in my premises comply with the Electricity at
Work Regulations?
Answer All employers and self-employed persons must ensure that the electrical
systems in their premises are safe. This will include ensuring Xerox
equipment in such premises is safe.
Xerox Europe’s Product Safety function has prepared a guide which contains
a list of tests which may be completed by your Xerox Europe Customer
Service Organization. THESE TESTS MUST BE CARRIED OUT ONLY BY
PERSONS WHO POSSESS THE RELEVANT SKILL, KNOWLEDGE AND
EXPERIENCE TO CARRY OUT SUCH TESTS.
Please contact the Xerox Europe Customer Service Organization for further
information.
THE USE OF INAPPROPRIATE TEST PROCEDURES AND TEST
EQUIPMENT MAY PROVIDE MISLEADING RESULTS AND MAY CAUSE
DEATH, PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.
Question I would like to carry out my own safety tests on the Xerox temperament
in my premises.
Answer You may, of course, request such tests as you deem necessary to satisfy
yourself that your Xerox equipment is safe. Your Xerox Europe Customer
Support will be pleased to advise you on such testing.
Question I require records of all tests.
Answer After safety testing, your Xerox Europe Customer Service Engineer will
provide you with a certificate which details the results of all tests completed.
In the event of any defect being noted, the Xerox equipment will be switched
off and disconnected from the supply until the defect has been corrected. You
will be advised of such action to enable such defects to be corrected.
Your responsibility
YOU MUST ENSURE THAT YOUR XEROX EQUIPMENT IS SAFE AT ALL
TIMES.
Additional queries
Please contact the Xerox Europe Technical Centre if you have any queries
regarding the information provided in this document. The address of the
Xerox Europe Technical Centre is provided in the previous section, European
Union declaration of conformity.

Installation Planning Guide Safety notes
DocuTech 65/DocuPrint 65 xi
Electrical safety
Attention to the following requirements ensures the safe operation of your
equipment.
Printer
USA/Canada The printer requires a 115V AC outlet, dedicated 20 Amp, 3-wire circuit.
Europe The printer requires a 220-240V outlet, dedicated 13 Amp or 10 Amp circuit.
The equipment must be connected to a grounded mains outlet.
CAUTION
Ensure that the power connection for your printer satisfies these
requirements.
•The power receptacle for the printer must meet the requirements stated
on the data plate on the rear of the printer.
•The socket outlet shall be installed near the equipment within reach of the
10 ft. (3 m) cable and shall be easily accessible.
•Use the power cable that is supplied with your printer and controller. Do
not use an extension cord, or remove or modify the power cord plug.
•Plug the power cable directly into a correctly grounded electrical outlet. If
you are not sure whether or not an outlet is correctly grounded, consult a
qualified electrician.
•Do not use an adapter to connect the printer to an electrical outlet that
lacks a ground connection terminal.
•The power cord is the disconnect device for this printer.
•Do not override or disable electrical or mechanical interlocks.
•Do not push objects into slots or openings on the printer. Electrical shock
or fire may result.
•Do not obstruct ventilation openings. These openings prevent
overheating of the printer.

Safety notes Installation Planning Guide
xii DocuTech 65/DocuPrint 65
Controller
USA/Canada The controller requires a dedicated 115V AC 20 Amp grounded receptacle.
Europe The controller requires a 220-240V, 13 or 10 Amp grounded receptacle.
CAUTION
Follow all safety cautions, warnings, and instructions marked on the
controller.
•Ensure that the voltages and frequency rating of the power receptacle
match the electrical rating label on the equipment.
•Do not make electrical or mechanical modifications to the equipment.
•Use the power cable that is supplied with your controller. Do not use an
extension cord, or remove or modify the power cord plug. If the plug must
be changed, a qualified electrician must install the plug correctly on the
power cord.
•Plug the power cable directly into a correctly grounded electrical outlet or
into the power strip that is connected to this outlet. If you are not sure
whether or not the outlet is correctly grounded, consult a qualified
electrician.
•Do not use an adapter to connect the controller to an electrical outlet that
lacks a ground connection terminal.
•The power switch functions as a standby type of device only. The power
cord serves as the primary disconnect device for the system.
•Do not push objects into slots or openings on the equipment. Electrical
shock or fire may result.
•Do not obstruct ventilation openings. These openings prevent
overheating of the controller.

Installation Planning Guide Safety notes
DocuTech 65/DocuPrint 65 xiii
Printer power on/off indicator
A power-on/power-off indicator shows the state of the power for the printer.
This indicator is located on the top front of the printer and has a rectangular
shape. This indicator glows green when printer power is on and emits no light,
is colorless, when the printer power is off.
When you need to determine whether the printer power is on or off, view the
power-on/power-off indicator rather than the message pane on the DocuSP
Print Services main window. Under some conditions, the main window may
not accurately indicate the state of the printer.
The printer power on/off indicator is shown in Figure 3.
Figure 3. Power on/off indicator

Safety notes Installation Planning Guide
xiv DocuTech 65/DocuPrint 65
Printer or controller - emergency power off
If any of the following conditions occur, turn off the equipment immediately
and disconnect the power cable from the electrical outlet. Contact an
authorized Xerox Service Representative to correct the problem:
•The equipment emits unusual odors, or makes unusual noises.
•The power cable is damaged or frayed.
•A wall panel circuit breaker, fuse, or other safety device has been tripped.
•Liquid is spilled into the equipment.
•The equipment is exposed to water damage or flood.
•Any part of the equipment is physically damaged.
NOTE: The only method to remove all power from the printer is to disconnect
the power cable from the electrical outlet.
Printer - ozone information
This product produces ozone during normal operation. The ozone produced is
dependent on print volume and is heavier than air. Install the system in a well
ventilated room with the minimum cubic requirements size listed below.
Providing the correct environmental parameter will ensure that the
concentration levels meet safe limits.
The minimum cubic volume requirement is: 1,765 cubic feet (50 cubic
meters).
To determine if the room has the required volume to meet the ozone
requirement, the length of the room multiplied by its width and height should
be equal to or greater than the cubic volume listed above.
If you need additional information about ozone, please request the Xerox
publication Ozone (part number 600E74140) by calling 1-800-828-6571 in the
United States and Canada. In Xerox Europe countries, call the local welcome
center.

Installation Planning Guide Safety notes
DocuTech 65/DocuPrint 65 xv
Printer - laser safety
CAUTION
The use of controls, adjustments or performance of procedures other than
those specified in this guide may result in hazardous light exposure.
With specific regard to lasers, the equipment complies with laser product
performance standards set by governmental, national, and international
agencies as a Class 1 Laser Product. It does not emit hazardous light, as the
beam is totally enclosed during all phases of customer operation and
maintenance.
Printer - operational safety
Safety Quality
Standards The equipment is manufactured under a BS5750 Quality system accepted by
the British Standards Institution.
Other National
Standards The Xerox DocuTech 65/DocuPrint 65 is also certified in compliance with
applicable standards by various national bodies.
Do these To ensure the continued safe operation of your printer, follow these safety
guidelines at all times:
•Always connect equipment to a correctly grounded power outlet. If in
doubt, have the outlet checked by a qualified electrician.
•Always follow all warnings and instructions that are marked on or are
supplied with the equipment.
•Always exercise care when moving or relocating the equipment. Please
contact your local Xerox Service Department to arrange relocation of the
printer to a location outside of your building.
•Always locate the printer on a solid support surface (not on plush carpet)
that has adequate strength to support the weight of the printer.
•Always locate the printer in an area that has adequate ventilation and
room for servicing. Refer to the space requirements figures in Chapter 2,
Installation and planning.
•Always use materials and supplies that are specifically designed for your
Xerox equipment. Use of unsuitable materials may result in poor
performance and possibly a hazardous situation.
Do not do these To ensure the continued safe operation of your printer:
•Never use an adapter plug to connect equipment to a power source that
lacks a ground connection terminal.

Safety notes Installation Planning Guide
xvi DocuTech 65/DocuPrint 65
•Never obstruct ventilation openings. They are provided to prevent
overheating.
•Never push objects of any kind into the ventilation openings.
•Never attempt any maintenance function that is not specifically described
in the DocuTech 65/DocuPrint 65 documentation.
•Never remove any covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
•Never locate the printer near a radiator or any other heat source.
•Never override or “cheat”any of the electrical or mechanical interlock
devices.
•Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the power outlet and call the Xerox
Welcome Center.
Your Xerox DocuTech 65/DocuPrint 65 printer is certified, manufactured, and
tested in compliance with strict safety and radio frequency interference
regulations. Any unauthorized alteration that includes the addition of new
functions or the connection of external devices may invalidate this
certification. Please contact your local Xerox representative or the Xerox
Welcome Center for a list of approved accessories.
Welcome Center phone numbers:
•USA - [phone]
•Canada - [phone]
•Europe - local Welcome Center
Additional
information - USA If you need any additional safety information concerning the equipment or the
Xerox supplied materials, please contact the Xerox Welcome Centre.
Additional
information -
Europe
If you need any additional safety information concerning the equipment or the
Xerox supplied materials, you may call the following number: 01707 353434