Xerox Phaser 4510 Instruction Manual

Product Safety Data Sheet
Phaser 4510
Page 1 of 2
_________________________________________________________________________
PRODUCT DESCRIPTION
Phaser 4510 Monochrome Laser Printer
MANUFACTURER INFORMATION
XEROX Corporation Office Group
P.O. Box 1000, Wilsonville, Oregon 97070-1000
PRODUCT DIMENSIONS
Depth Width Height
4510 465 mm / 18.3 inches 422 mm / 16.6 inches 404 mm / 17.3 inches
WEIGHT
4510 20.5 kg / 45.2 lbs
ELECTRICAL INFORMATION
115 V 230 V
Voltage (Volts) 110-127 VAC 220-240 VAC
Frequency (Hertz) 50/60 Hertz 50/60 Hertz
Current (Amps) 11 Amps 5.5 Amps
PRODUCT SAFETY CERTIFICATION
Standard Certifying Body
Low Voltage Directive • 73/23/EEC XEROX Office Group
CB Report & Certificate • IEC 60950-1:2001
• EN 60950-1:2001 +A11:2004
• IEC 60825-1:1993 +A1:1997 +A2:2001
• EN 60825-1:1994 +A1:2002 +A2:2001
TUV Rheinland
UL Report • UL 60950-1:2003, First Edition
• CSA C22.2 No. 60950-1-03, 1st Ed.
April 1, 2003
UL
ELECTROMAGNETIC COMPATIBILITY CERTIFICATION
Standard Certifying Body
EMC Directive • 89/336/EEC XEROX Office Group
EMC Report • FCC Part 15B Class B
• Canada ICES-003 Class B
• EN 55022:1998 +A1:2000 +A2:2003,
Class B
• EN 61000-3-2:2000 +A2:2005
• EN 61000-3-3:1995 +A1:2001
• EN 55024:1998 +A1:2001 +A2:2003
XEROX Office Group

Product Safety Data Sheet
Phaser 4510
Page 2 of 2
_______________________________________________________________________________
POWER CONSUMPTION
115 V
Off Mode (Wh/hr) Power Save (Wh/hr) Standby (Wh/hr) Run Mode (Wh/hr)
0 10 86 709
230 V
Off Mode (Wh/hr) Power Save (Wh/hr) Standby (Wh/hr) Run Mode (Wh/hr)
0 12 82 873
HEAT OUTPUT
115 V
Off Mode (BTU/hr) Power Save (BTU/hr) Standby (BTU/hr) Run Mode (BTU/hr)
0 34 294 2419
230 V
Off Mode (BTU/hr) Power Save (BTU/hr) Standby (BTU/hr) Run Mode (BTU/hr)
0 41 280 2979
NOTE: The electrical power information provided should not be used to define the electrical support required for
this product. Consult your Xerox representative if you require detailed information.
LIGHT SOURCE
Laser -- Class 1 Laser Product (Accession# 0120917)
AUDIBLE NOISE
Declared noise emissions in accordance with ISO 9296:
Model: Phaser 4510N
(Base Configuration)
Idling Operating
(Standard Mode)
LWAd (1B=10dB)LWAd = 4.4 B LWAd = 7.0 B
Bystander Position (1.0 m) LpA = 28.2 dB LpA = 54.9 dB
CHEMICAL EMISSIONS
Measured Product Concentration (mg/h)
Ozone Not detected
Styrene 0.37 mg/h
Particles (Dust) (<10µm) 2.56 mg/h
OZONE FILTER REPLACEMENT
Not applicable
ENVIRONMENTAL LIMITATIONS
115 V / 230 V Relative Humidity (%) Ambient Temperature (ºC)
Operating 15% - 85% 5ºC - 35ºC