Xiaomi RD10M User manual

All images are for illustration purposes only and may
differ from the actual product by model and region.

About this product
Indicator
Reset
button
The Xiaomi WiFi Range Extender N300 is designed to extend
the range of your home Wi-Fi network.
Indicator Constant blue (working normally)
Flashing blue (update in progress)
Constant yellow (switching on)
Flashing yellow (waiting to initialize)
Flashing red (hardware fault)
Reset button Press and hold for at least
5 seconds to restore
factory settings.
2

Place the range extender in a location where you require
a stronger signal. Connect it to the power supply and wait
for the yellow indicator to start flashing.
Scan the QR code to download the Mi Home App/Xiaomi
Home App and follow the in-app instructions to configure
the settings and manage the device.
The blue indicator will stay constant when the settings have
been configured. You can then move the range extender to
another location without reconfiguring the settings.
3
Installation
3

How does the Xiaomi WiFi Range Extender N300 extend the
range of my Wi-Fi network?
The range extender is designed to strengthen the signal
from an existing Wi-Fi network. Before configuring the range
extender, determine which network you need to extend and
ensure that you know the Wi-Fi password. Range extenders
work in a similar way to a relay race – the main router and
the range extender are the participants in the race, while the
Wi-Fi signal is the baton which is passed between each
participant. The connected devices (e.g. your smartphone or
computer) are the finish line. The participants pick up the
baton and deliver it to the finish line, allowing the Wi-Fi
network to cover a larger area. The more range extenders
you add to the network, the greater the network range.
FAQs (frequently asked questions)
4

How do I manage the Xiaomi WiFi Range Extender N300?
If you use the range extender in combination with the
Mi Wi-Fi router, you can manage the settings using the
Mi Wi-Fi app. If you are using a different router, you can
download the Mi Home app to manage the network settings.
What should I do if the Internet speed slows down after
I connect the Xiaomi WiFi Range Extender N300?
If the Internet speed slows down after you connect the
range extender, there may be interference on the network.
Open the Mi Wi-Fi app or Mi Home app and check the range
extender status. If the app indicates that the signal is poor,
move the range extender closer to the router and try again.
What should I do if the Xiaomi WiFi Range Extender N300
stops working?
Open the Mi Wi-Fi app or Mi Home app and check the range
extender status, and then follow the troubleshooting steps
below:
5

If the signal is poor, move the range extender to another
location where there are no large obstacles between
the range extender and the router.
If the range extender is offline, check that the router
is emitting a Wi-Fi signal. If the router is working
normally, restart the range extender and try again.
Check whether the range extender was blacklisted by
your router.
If the issue persists, hold down the reset button for at
least 5 seconds until the indicator is constant yellow.
Reconfigure the settings and try again.
How do I configure the settings if I want to connect the
range extender to a new Wi-Fi network?
Reset the range extender to factory settings and reconfigure
the settings.
1
2
3
4
6

7
for the recycling of waste electrical and electronic
equipment, appointed by the government or local
authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and
human health. Please contact the installer or local
authorities for more information about the location as well
as terms and conditions of such collection points.
Specifications:
Name: Xiaomi WiFi Range Extender N300
Model: RD10M
Operating Temperature: 0~40°C
Input: 100~240VAC, 50/60Hz, 0.35A
Operating Frequency: 2400MHz~2483.5MHz(≤20dBm)
Note:The network standby power consumption is 1.3 W ,if
all wired network ports are connected and all wireless
network ports are activated.
Certifications:
Hereby, Beijing Xiaomi Electronics Co., Ltd.
declares that the radio equipment type RD10M is in
compliance with Directive 2014/53/EU, Directive
2011/65/EU and Directive 2009/125/EC. The full text
of the EU declaration of conformity is available at
the following internet address:
http://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste
electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed
with unsorted household waste. Instead, you should protect
human health and the environment by handing over your
waste equipment to a designated collection point

8
All products bearing this symbol are waste
electrical and electronic equipment (WEEE as in
directive 2012/19/EU) which should not be mixed
with unsorted household waste. Instead, you should
protect human health and the environment by handing
over your waste equipment to a designated collection point
for the recycling of waste electrical and electronic
equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential
negative consequences to the environment and human
health. Please contact the installer or local authorities for
more information about the location as well as terms and
conditions of such collection points.
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such
a way that it does not require a safety connection to
electrical earth.
Caution:
The product can be used within all European
Union countries (BE/FR/DE/IT/LU/NL/DK/
IE/GB/GR/PT/ES/AT/FI/SE/-CY/CZ/EE/HU/LV/LT/MT/PL/
SK/SI/BG/RO/HR).
To comply with CE RF exposure requirements, the device
must be installed and operated 20cm (8 inches) or more
between the product and all person’s body.
The mains plug is used as disconnect device. The pluggable
equipment shall be installed near the socket-outlet and shall
be easily accessible.
Manufactured by: Beijing Xiaomi Electronics Co., Ltd.
#802, 8th Floor, Building 5, No. 15 10th Kechuang Street,
Beijing Economic-Technological Development Area, Beijing,
China, 100176

Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz
Table of contents
Other Xiaomi Extender manuals