Xiaomi Mi Robot Vacuum-Mop 2 Pro+ User manual

Mi Robot Vacuum-Mop 2 Pro+ User Manual · 01
Робот-пылесос с функцией влажной уборки Mi 2 Pro+ Руководство пользователя · 97
Manuel d’utilisation duMi Robot Vacuum-Mop 2 Pro+ · 49
Mi Staubsauger-Wischer-Roboter 2 Pro+ Benutzerhandbuch · 146
Manual de usuario de Mi Robot Vacuum-Mop 2 Pro+ · 25
Odkurzacz z mopem Mi Robot 2 Pro+ — instrukcja obsługi · 122
Manuale utente Mi Robot Vacuum-Mop 2 Pro+ · 73
Mi Temizlik Robotu 2 Pro+ Kullanım Kılavuzu · 170
Mi  +Pro 2       · 194

1
Welcome
Thank you for choosing the Mi Robot Vacuum-Mop 2 Pro+!
The Mi Robot Vacuum-Mop 2 Pro+ is an intelligent all-in-one cleaner designed for ultimate convenience and cleaning efficiency. Equipped with high-
precision motion sensors, obstacle avoidance technology, and an innovative visual navigation system, the Mi Robot Vacuum-Mop 2 Pro+ quickly maps out
its surroundings and generates cleaning routes as it goes. Thanks to its intuitive obstacle detection and high wheel clearance design, the Mi Robot Vacuum-
Mop 2 Pro+ can easily navigate complex home layouts. Once a cleaning task is completed, the Mi Robot Vacuum-Mop 2 Pro+ automatically returns to the
charging dock, delivering a hassle-free experience from start to finish. Using its high-powered suction and electronically-controlled water mopping system,
the Mi Robot Vacuum-Mop 2 Pro+ cleans by sweeping in front and mopping in back for amazing results every time. The Mi Home/Xiaomi Home app also
makes it easy to view your cleaning map, schedule a cleaning, and switch between cleaning modes, allowing you to clean your entire home at the touch of a
button. Thank you for choosing the Mi Robot Vacuum-Mop 2 Pro+, and welcome to the future of smart living!
Read this manual carefully before use, and retain it for future reference.
For detailed e-manual, please go to www.mi.com/global/service/userguide
Hereby, Dreame (Tianjin) Information Technology Co., Ltd. declares that the radio equipment type STYTJ02ZHM is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html

2
Safety Information
This product is for floor cleaning in a home environment only. Do not use it outdoors, on non-floor
surfaces, or in a commercial or industrial setting.
Only for navigation and positioning purposes, the camera of the vacuum-mop will collect individuals in the surroundings within the range
of the viewing angles when it is cleaning. Please be assured that all your personal information will be protected by the data encryption
technology.
Usage Restrictions
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
The appliance is only to be used with the power supply unit provided with the appliance.
This appliance contains batteries that are only replaceable by skilled persons.
Ensure children and pets are kept at a safe distance from the vacuum-mop while it is operating.
If the power cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
Do not use the vacuum-mop in an area suspended above ground level without a protective barrier.
Do not use the vacuum-mop at an ambient temperature above 40°C or below 0°C or on a floor with
liquids or sticky substances.
Pick up any cables from the floor before using the vacuum-mop to prevent it from dragging them
while cleaning.

3
Remove fragile or small items from the floor to prevent the vacuum-mop from bumping into and
damaging them.
Keep the brush cleaning tool out of reach of children.
Do not place children, pets, or any item on top of the vacuum-mop regardless of whether it is
stationary or moving.
Keep hair, fingers, and other body parts away from the suction opening of the vacuum-mops.
Do not use the vacuum-mop to clean any burning substances.
Do not vacuum up hard or sharp objects.
Make sure the vacuum-mop is turned off and the charging dock is unplugged before cleaning or
performing maintenance.
Do not wipe any part of this product using a wet cloth or any liquids.
Make sure the vacuum-mop is turned off when being transported and kept in its original packaging
if possible.
Please use this product in accordance with the instructions in the User Manual. Users are
responsible for any loss or damage arising from improper use of this product.
Safety Information
Batteries and Charging
WARNING: Do not use any third-party battery. Use only with CDZ1902 charging dock.
Do not attempt to disassemble, repair, or modify the battery or charging dock on your own.

4
Safety Information
Do not place the charging dock near a heat source.
Do not use a wet cloth or wet hands to wipe or clean the dock's charging contacts.
If the vacuum-mop won't be used for an extended period, fully charge it, then turn it off and store in
a cool, dry place. Recharge the vacuum-mop at least once every 3 months to avoid over-discharging
the battery.
The lithium-on battery pack contains substances that are hazardous to the environment. Before
disposing of the Vacuum-Mop, please first remove the battery pack, then discard, or recycle it in
accordance with local laws and regulations of the country or region it is used in.
When removing the batteries from the product, it is better to use up the batteries and make sure
your product is disconnected from power. Uninstall the screw on the bottom, then remove the
cover.
Unplug the battery connector, then remove the batteries. Do not damage the battery case to avoid
any risk of injuries.
Return the batteries to a professional recycling organization.

5
Product Overview
Accessories
Cleaning Tool
Water Tank Charging Dock
Power Cord Side Brush
Mop Pad
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product
enhancements.

6
Product Overview
Vacuum-Mop
Power/Clean Button
Power on/off: Press and hold for 3 seconds
Clean: Press to start cleaning after the vacuum-mop
is powered on
Spot/Dock Button
Press to send vacuum-mop back to charging dock
Press and hold for 3 seconds to start Spot Clean mode
Status Indicator
White: Cleaning/Cleanup completed/Fully charged
Blinking white: Returning to dock to charge
(normal battery)
Slowly blinking white: Charging (normal battery)
Blinking orange: Returning to dock to charge
(low battery)/Error
Slowly blinking orange: Charging (low battery)
Note: Press any button to pause while the vacuum-mop is cleaning, returning to
dock, or in Spot Clean mode.

7
Product Overview
Dust Compartment
Mopping Assembly
Vacuum-Mop
Dust Compartment Clip
Dust Compartment
Cover
Wi-Fi Indicator
On: Wi-Fi connected
Blinking slowly:
To be connected
Blinking quickly:
Connecting
Reset Button:
Press and hold for 3
seconds to restore
factory settings
Air Outlet/Speaker
Filter
Water Tank
Water Filling Opening
Water Tank Release
Button
Mop Pad
Mop Pad Attachment
Area

8
Product Overview
Vacuum-mop and Sensors Vacuum-mop and Sensors
Charging Dock
Omnidirectional Wheel
Cliff Sensor
Visual Navigation
Sensor
Infrared Deceleration
Sensor
Obstacle Sensor
Collision Buffer
Signaling Area
Charging Contacts
Power Port
Charging Contacts
Optical Sensor
Side Brush
Main Wheels
Brush
Brush Cover Clips

9
Before Use
Remove Protective Coverings Position and Connect the Charging Dock
Install the Side Brush
Tidy up Any Loose Cord
Before use, remove the protective strips from both sides of the
vacuum-mop's bumper as well as the protective film on the visual
navigation sensor.
Place the charging dock near an electrical outlet in an area with a good
Wi-Fi signal. To ensure the vacuum-mop can return to the charging dock,
leave at least 0.5 meters of clearance on either side of the charging dock
and at least 1.5 meters of open space in front, and make sure no objects
are directly overhead. Do not place the charging dock under furniture,
such as a cabinet, or chair. Connect the power cord to the charging dock
and tidy up any loose cord to prevent the vacuum-mop from getting
tangled, which could accidentally move or unplug the charging dock.
Insert the side brush into the attachment slot on the bottom of the
vacuum-mop.
> 1.5 m
> 0.5 m
> 0.5 m
Note: Make sure the charging dock is in a well-lit area out of direct sunlight and away
from reflective objects, such as mirrors, which can prevent the vacuum-mop from
returning to the charging dock.

10
Before Use
Charge the Vacuum-mop Connect with Mi Home/Xiaomi Home App
Place the vacuum-mop onto the charging dock. The vacuum-mop will
automatically turn on and begin charging. The indicators of buttons
and on the vacuum-mop will slowly blink white while charging, and
remain lit once fully charged.
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other
smart home devices.
Scan the QR code to download and install the
app. You will be directed to the connection
setup page if the app is installed already. Or
search "Mi Home/Xiaomi Home" in the app
store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on
the upper right, and then follow prompts to add
your device.
Reset Wi-Fi
When there is a connection loss between your phone and the vacuum-
mop due to the router reconfiguration, wrong password or so, please
open the cover of the vacuum-mop so that you can see the Wi-Fi
indicator. Simultaneously press and hold the buttons and until you
hear a voice saying "Waiting for the network configuration". Once the Wi-
Fi indicator is slowly blinking, the Wi-Fi has been successfully reset.
Battery Level Indicator
White:
Battery level > 15%
Orange:
Battery level ≤ 15%
· Fully charge the vacuum-mop before using it for the first time. This will take about 6
hours.
· To ensure safety while charging and to prevent the mop pad from damaging floor
surfaces, please remove the mopping assembly prior to charging.
Notes:
· Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions
based on the current app version.
Notes:
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name
of the app displayed on your device should be taken as the default.

11
How to Use
Start Cleaning
Press and hold the button for 3 seconds to turn on the vacuum-mop.
The power indicator will turn white to indicate that the vacuum-mop is
in standby mode. Press the button , and the vacuum-mop will start
cleaning in an S-shape pattern. Once all areas are cleaned, the vacuum-
mop will finish by cleaning along edges and walls, then return to the
charging dock to recharge.
If the vacuum-mop starts running low on battery during a cleaning task,
it will automatically return to the charging dock to recharge, then resume
cleanup where it left off after being charged sufficiently.
During a cleaning task, the vacuum-mop may enter and exit rooms and
detect boundaries by gently bumping into walls and furniture. This is
normal and does not affect cleaning efficiency.
· Before a cleaning task, make sure the vacuum-mop is fully charged and starts from
the charging dock. Do not move the charging dock while the vacuum-mop is cleaning.
· The above diagram is provided for illustrative purposes only.
Notes:
Scheduled Cleaning
You can schedule cleaning time in the Mi Home/Xiaomi Home app. The
vacuum-mop will automatically start cleaning at the designated time and
then return to the charging dock to recharge when the cleaning is done.
Pausing
Sleep Mode
To resume cleaning, press the button . Press the button to end the
current cleaning task and the vacuum-mop will go back to the charging dock.
The vacuum-mop will automatically enter sleep mode after 10 minutes of
inactivity, then the power and charging indicators will go off. To wake up
the vacuum-mop, press any button.
· To help avoid navigation errors, don't pick up or move the vacuum-mop while it is paused.
· Placing the vacuum-mop onto the charging dock while it is paused will end the current
cleaning task.
Notes:

12
How to Use
Do Not Disturb Mode
More App Features
The indicator will go off when the vacuum-mop is in do not disturb (DND)
mode. Previously scheduled cleanup tasks will be performed as usual
when in DND mode. Unfinished cleaning tasks will not be resumed until
the current DND period ends.
The Mi Home/Xiaomi Home app offers a variety of special features
and different cleaning modes, including Select a Zone to Clean, Zoned
Cleanup, App-Configured Restricted Areas/Virtual Walls, Restricted
Areas, Clean There, Carpet Boost, and more.
Note: After the vacuum-mop is connected with the Mi Home/Xiaomi Home app, the
DND mode is enabled by default. You can disable DND or modify DND periods in the
app.
· For more information on how to use the features of vacuum-mop in the Mi Home/
Xiaomi Home app, please refer to the instructions in the app.
· Please note that certain features may vary due to continuous app updates and
enhancements.
Notes:
Spot Clean mode
Note: Activating Spot Clean mode will end the current cleaning task of the vacuum-mop.
When the vacuum-mop is in standby mode or paused, press and hold the
button for 3 seconds to start Spot Clean mode. In this mode, it will clean
a square-shaped area of 1.5 ×1.5 meters directly around the vacuum-mop.
When the spot cleaning is done, the vacuum-mop will automatically return
to its original location and shut off.
1.5 m
1.5 m

13
How to Use
Using the Mopping Function
1. Install the mop pad 3. Install the mopping assembly
4. Start mopping2. Fill the water tank
Open the water tank lid, fill the tank with water, then securely close the lid.
Dampen the mop pad and wring out excess water. Slide the pad all the
way into the slot of the water tank until it is securely in place.
To install the mopping assembly, slide it into the back of the vacuum-
mop until it clicks into place.
Press the button or use the Mi Home/Xiaomi Home app to start the
cleanup. The vacuum-mop will automatically recognize the mopping
assembly and begin mopping and dispensing water as needed.
· Do not add hot water to the water tank, as this may cause the tank to become deformed.
· To avoid clogging, do not add any cleaning agents or disinfectants to the water tank.
· Do not use the mopping function on carpet.
· The mop pad should be cleaned after every 30 minutes of use to ensure adequate
water flow and cleaning effectiveness.
Notes:
Notes:

14
How to Use
5. Adding water or cleaning mop pad during cleaning 7. Remove the mopping assembly
6. Adjust water flow rate
If you need to add more water to the vacuum-mop or clean the mop
pad during a cleaning task, press any button to pause the vacuum-mop,
then remove the mopping assembly. After adding water or cleaning the
mop pad, reattach the mopping assembly, then press the button to
resume the cleaning task.
After the vacuum-mop finishes cleaning and returns to the charging
dock, press the side clips of the mopping assembly inward and pull to
remove the assembly.
The vacuum-mop's water flow rate can be adjusted in the Mi Home/
Xiaomi Home app.
Note: To help avoid navigation errors, do not pick up or move the vacuum-mop while it
is paused.
Note: When the vacuum-mop is charging or not in use, remove the mopping assembly,
pour out all remaining water in the tank, and clean the mop pad to prevent mildew or
lingering odors.
Water Level Setting
Low Medium High

15
Care & Maintenance
Brush Using the Brush Cleaning Tool
Omnidirectional Wheel
1. Flip the vacuum-mop over and pinch the clips to remove the brush
cover.
2. Lift the brush out of the vacuum-mop, then clean the brush bearings.
3. Use the included brush cleaning tool to remove any hairs tangled on
the brush.
4. Reinsert the brush, then put the cover back on and press on it until the
clips lock into place.
1. Flip the vacuum-mop over
and pull out the omnidirectional
wheel.
2. Remove hair, dirt, and other
debris from the wheel and axle.
3. Reinsert the wheel and press it
firmly back into place.
Note: If too much hair is tangled in the brush, or if the hair is tightly tangled, do not
forcibly pull on it, as this could damage the brush.
* Clean it as needed.
Note: It is recommended to clean the brush weekly and replaced every 6 to 12 months.
* Weekly cleaning is recommended.
Brush Cover
Wheel
Axle
Holder
Clips
Brush
Brush Bearings
· A small screwdriver or other pry tool
can be used to gently pop out and
remove the wheel.
· The wheel can be cleaned with water
and reinstalled after drying.
Notes:

16
Care & Maintenance
Side Brush Vacuum-Mop Sensors
1. Flip the vacuum-mop over, then gently pull out the side brush as shown
in the diagram below to clean it.
2. Reinstall the side brush.
Use a soft cloth to clean all sensors in the vacuum-mop, including:
1. The four cliff sensors on the bottom.
2. The charging contacts on the bottom.
3. Optical sensor on the bottom of the vacuum-mop.
4. Infrared deceleration sensor and obstacle sensor on the front of the
vacuum-mop.
* Monthly cleaning is recommended.
Note: It is recommended to clean the side brush monthly and replace every 3 to 6
months.
Cliff Sensor
Charging Contacts
Optical Sensor
Infrared Deceleration Sensor
Obstacle Sensor

17
Care & Maintenance
Dust Compartment and Filter Cleaning the Washable Filter
Note: To prevent the filter from becoming clogged, lightly tap the dust compartment
when emptying its contents.
Note: Weekly cleaning is recommended. Note: Biweekly cleaning is recommended.
Note: Only clean water should be used to clean the filter. Do not use detergent.
1. Open the vacuum-mop cover, then pinch the dust compartment clip to
remove the dust compartment.
1. Open the dust compartment cover at the positions marked with
arrows.
2. Open the dust compartment cover as indicated by the diagram. 2. Add clean water to the dust compartment, and close the dust
compartment cover, then shake the compartment back and forth, finally
pour out the water.

18
Care & Maintenance
Mop Pad
Note: Filter must be fully dry before use (allow at least 24 hours).
Note: Do not attempt to clean the filter with a brush or finger.
* After-each-use cleaning is recommended.
Note: It is recommended to change the mop pad every 3 to 6 months.
3. Remove the filter, as illustrated, then rinse it out and lightly tap on the
edge of the filter to remove dust and debris.
4. Place the dust compartment and filter aside to dry before reinstallation.
1. Pull the mop pad off of the mopping assembly to remove it.
2. Clean and dry the mop pad.
Remove the pad from the mopping assembly before cleaning it, and
make sure dirty water does not flow back into the water outlet to avoid
clogging. Do not press too hard on the mop pad, as this can hinder its
performance. The mop pad should be cleaned before each use.

19
Care & Maintenance
Battery Restart the Vacuum-mop
Restoring Factory Settings
Charging Dock
Updating the Firmware
Note: If the vacuum-mop is not used for an extended period, turn it off and put it away.
To prevent damage from over-discharging, the vacuum-mop should be recharged at
least once every three months.
If the vacuum-mop stops responding or cannot be turned off, press and
hold down the button for 6 seconds to forcefully turn it off. Then press
and hold the button for 3 seconds to turn the vacuum-mop on.
If the vacuum-mop does not function properly after being restarted, use a
pin to press the reset button until you hear a voice say "Restoring factory
settings". This will reset the vacuum-mop to its original factory settings.
Clean the contacts of the charging dock with a soft cloth.
You can update the firmware via the app. Before updating, make sure the
vacuum-mop is on the charging dock and has at least 15% battery left.
The vacuum-mop contains a high-performance lithium-ion battery pack.
Please ensure that it remains well-charged during daily use to maintain
optimal battery performance.