Xiaomi XWFE01MG-GL User manual

Smart Pet Fountain Filter Set User Manual

Product Overview
Package Contents
Filter × 2 Pre-lter Unit × 2
Water Pipe × 1 User Manual × 1
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes
only. Actual product and functions may vary due to product enhancements.
Read this manual carefully before use, and retain it for future reference.
01

How to Install
Filter Filter Tray
Filter
1. Rinse the lter with clean water for two minutes to
remove the oating carbon powder generated by the
collisions of the activated carbon during transportation.
2. Install the lter into the lter tray.
3. Put the cover back onto the water tank.
4. Press and hold the lter reset button at the
bottom of the pet fountain for two seconds.
When the mode indicator turns white, the
remaining service life of the lter is reset.
Standard Mode Indicator Smart Mode Indicator
Filter Reset Button
Note: Before using the lter, rinse it with clean water for two minutes to remove the oating carbon powder
generated by the collisions of the activated carbon during transportation.
02

Pre-filter Unit
Water Pipe
Water Pipe
Put the pre-lter into the pre-lter holder, and then install the holder onto the water pump.
Connect the ends of the water pipe to the cover and the water pump.
Note: It is recommended to replace the lter, the pre-lter, and the pre-lter holder every month, and replace
the water pipe every two months. Thoroughly clean the parts including the water tank, the cover, the lter tray,
the lter, the pre-lter, and the water pump at least every seven days.
Pre-lter
Pre-lter Holder
03

Specifications
Model
Net Weight
Item Dimensions
18.5 ± 2 g (each lter)
5.0 ± 1.5 g (each pre-lter unit)
5.0 ± 1.5 g (water pipe)
120 × 40.5 × 18.6 mm (each lter)
37 × 29 × 26 mm (each pre-lter unit)
φ12 × 70 mm (water pipe)
XWFE01MG-GL
Made in China
Xiaomi Smart Pet Fountain Filter SetName
Compatible With Xiaomi Smart Pet Fountain
04

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Beijing Kitten&Puppy Technology Co., Ltd.
(a Mi Ecosystem company)
Adress: Room Q-101, Floor 2, Q Area, Anning Zhuang Back Street, Haidian District, Beijing, China
For further information, please go to www.mi.com
Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz