XINKE A400 User manual

M
MI IC CS S
P
PR RO OG GR RE ES SS S
A
A4 40 00 0- -A A5 50 00 0
GGRROOUUPPEESSÉÉLLEECCTTRROOGGÈÈNNEESS- GGEENNEERRAATTIINNGGSSEETTSS
GGRRUUPPOOSSEELLEECCTTRROOGGEENNOOSS- GGEERRAADDOORREESSEELLÉÉCCTTRRIICCOOSS
SSTTRROOMMEERRZZEEUUGGEERR- GGRRUUPPPPIIEELLEETTTTRROOGGEENNII- GGEENNEERRAATTOORRAANNLLÆÆGG
DDIIEESSEELLGGEENNEERRAATTOORRAAGGGGRREEGGAATT- AAGGGGRREEGGAATTEERR- AAGGGGRREEGGAATTEENN
DDIIEESSEELLAAGGGGRREEGGAAAATTIITT- RRAAFFSSTTÖÖDDVVAARR- ÃÃÅÅÍÍÅÅÐÐÀÀÒÒÎÎÐÐÍÍÛÛÅÅÓÓÑÑÒÒÀÀÍÍÎÎÂÂÊÊÈÈ
Rédacteur : Sce Doc. Vérificateur : B.E.E. Approbateur : Sce Doc Administrateur : Sce Doc.
LLeessrreecchheerrcchheessppeerrmmaanneenntteessddeennoossbbuurreeaauuxxdd’’ééttuuddeess,,aaiinnssiiqquueell’’aamméélliioorraattiioonnccoonnttiinnuueelllleeddeennoosspprroodduuiittss,,eennggaaggeennttnnoottrreeSSoocciiééttééààsseerréésseerrvveerrlleeddrrooiittddee
ttoouutteessmmooddiiffiiccaattiioonnssssaannsspprrééaavviiss..
TToouussddrrooiittssddeemmooddiiffiiccaattiioonnssddeesspprréésseennttssmmaannuueellssrréésseerrvvééss..
RReepprroodduuccttiioonneettttrraadduuccttiioonn,,mmêêmmeeppaarrttiieellllee,,iinntteerrddiitteessaannssaauuttoorriissaattiioonnssppéécciiaallee..
CCoonncceeppttiioonneettrrééaalliissaattiioonn::SSeerrvviicceeddeeddooccuummeennttaattiioonn
ààppaarrttiirrddeessddooccuummeennttssssuuiivvaannttss::
BBaasseeddooccuummeennttaaiirreeccoonnssttrruucctteeuurrggrroouuppeesséélleeccttrrooggèènneess++DDooccBBEEEEPPaaggiinnaattiioonn::2255ppaaggeess((OOààAA++11àà2233))
C. RESSEGUIER P. PLAZENET
© Publication : ref G.P.A.O.33502003001
user’s
user’s
instructions
instructions
ShenZhen XinKe power equipment Co .Ltd

SAFETY SYMBOLS
Caution : danger
Caution : risk of electric shock
Caution : risk of corrosion
Caution : risk of explosion
Caution : toxic materials
Caution : under pressure fluids
Caution : high temperature
(risk of burns)
Caution : rotating or moving parts
(risk of entanglement)
Authorised staff only
APPLICATION OF MACHINERY DIRECTIVE 89/392/EEC TO GENERATING SETS
- Access strictly reserved to staff authorised under the legislation in force.
- Live installation, automatic start-up possible.
Periodic maintenance required
Battery charge check required
Compulsory lifting point
Naked flame and unprotected
lighting forbidden.
No smoking
Publications supplied with the gene-
rating set must be consulted.
Protective clothing must be worn
Eyes and ears must be protected
Compulsory stacking point
Water based fire extinguishers
forbidden
A 02/99
Due to on-going research in our design offices and the continuous improvement of our products, our Company
reserves the right to make changes without prior notice.
All rights to change the contents of the current manuals reserved.
Reproduction and translation, even partial, forbidden without special authorisation.
Design and production : Publication Department
from the following documents :
Generating sets manufacturer's source documents + Electrical Design Office documentation
This equipment has been configured for a specific application. It is forbidden to modify the system
configuration without written consent from a person authorised by our company.
In the event of not respecting this procedure, our company disclaims all responsibility on the
consequences that could result from such action. .
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

0/99 1
CONTROL EQUIPMENT
1. Ammeter
2. Ammeter switch
3.Voltmeter
4.Voltmeter switch
5. Frequency/RPM meter
6. Front lighting
7. Hours counter
8. Oil pressure gauge
9. Coolant temperature gauge
10. Battery voltage gauge
11. Fuel level gauge
12. Emergency stop button (remote in Version
IV & V)
13. MICS Progress
14. 4-position function switch
15. Oil temperature gauge
16. Battery ammeter gauge
17. Shutdown extractor light
18. MDEC synthesis alarm light
19. Lack of water preheating light
20. Retention tank warning light
21.Test lamps push button
Progress can be factory configured in several ways.
Any further changes will have to be submitted to our company prior consent.
A
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

Shows the current, in Amps, on one phase .
Shows the frequency, in Hz, delivered by the
genset as well as the engine speed, in RPM.
Shows the voltage, in Volts, supplied by the
generating set.
Various positions giving, on the voltmeter,
phase/phase or phase/neutral voltage rea-
dings.
Various positions giving, on the ammeter, rea-
dings of current supplied by each phase.
This switch has 4 positions :
: In this position, the genset does not
start in the event of mains failure.
: This operating mode is used to check
the proper off load operation of the genset
“TEST ” : For test purposes, this operating
mode enables you to check the automatic
start-up facility as it simulates a mains failure.
The genset starts automatically and delivers
power to the installation.
A - DESCRIPTION
The control racks are fitted with various standard or optional instruments and gauges. Depending
on the options selected, the positioning of these instruments on the front may vary. The figures
below define their functions
2 02/99
- AMMETER :
- FREQUENCY/RPM METER :
- VOLTMETER :
- VOLTMETER SWITCH :
- CAMMETER SWITCH :
- FUNCTION SELECTOR
SWITCH :
A
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

: In this mode, the genset is ready to start
on a mains failure or external command. The
start-up is interlocked with a time delay that
avoids any start-up should the mains failure
last for less than a few seconds.
NOTE : On positions (during mains fai-
lures), and “TEST”, the gauges and bat-
tery voltmeter are powered up and indicate
the state of the various components under
control. Also, the power supply indicator lamp
is lit during start-up.
Indicates the amount of oil pressure in the
engine lubricating system.
Indicates the coolant temperature in the engi-
ne.
Indicates the voltage, in Volts, of the starting
battery(ies).
Indicates the amount of fuel in the tank.
This totals the genset running hours as soon
as it starts.
To be pushed in the event of an accident or
problem, it will immediately stop the genera-
ting set from functioning. It must be reset
when the genset is returned to service.
: Push/pull
or push/twist release type.
- OIL PRESSURE GAUGE :
- ENGINE TEMPERATURE
GAUGE :
- BATTERY VOLTMETER :
- FUEL LEVEL GAUGE :
- HOURS COUNTER :
- EMERGENCY
STOP BUTTON :
02/99 3
000000th
B148 220 - 240 V - 50 Hz
A
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

4 02/99
- RACK LIGHTING
- MICS PROGRESS
- SCREEN
- KEYPAD
It will light the front of the rack as soon as
the genset starts.
This is the A 400 main component.
It ensures the following :
- Automatic start-up and shutdown of the gen-
set,
- Control of the engine main safety devices.
It also ensures :
- Automatic synchronisation function :
genset/genset or genset/mains,
- Paralleling function : genset/genset or gen-
set/mains,
- Load distribution function between gensets.
The screen allows you to view :
- all alarms and faults,
- the genset operating states,
- various parameters which can be modified
(with access code).
The keypad ensures modification of the follo-
wing :
- delays,
- set-up thresholds,
- genset general parameters (basics)
- access to the various configuration screens
(checks, control, set-up).
A
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

02/99
5
Perform the initial commissioning of the battery(ies) 20 minutes before any
start-up attempts (see Maintenance Manual).
Minimum voltage : 8 V for a 12 V battery
18 V for a 24 V battery
- RESET :
- STOP :
- ARROWS :
- ESCAPE :
- ENTER :
- GREEN LED :
- ORANGE LED :
- RED LED :
Pressing this key will erase the message
indicating a fault.
Pressing this key will immediately shut
down the generating set and will light the
fault lamp. Restarting the genset will not
be possible until the fault has been
RESET.
In a window, the Left and Right arrows enable
access to the various options offered (see next
page for list of screens).
Pressing this key enables access to the higher
level screen (see next page for list of screens).
Pressing this key enables :
1 - Access to the value of a parameter,
2 - Validation of a command or the value of a
modified parameter.
Signals that the Progress is powered up (green
flashing).
Signals an alarm (orange blinking).
Signals a fault (red blinking).
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

> OVERVIEW ° REPORT
° COMMAND ° MEASURE
° SET-UP ° HELP
Select ∆ ~ Enter Esc Γ
MODE = AUTO TUE 22:37
Sets Runs With Load
Mains failure ∅Run !
Power source : GenSet
OVERVIEW
HIGH WATER TEMP SHUT
Logged ∅Sat 17/06
Clear message by 
Select ∆ ~ Enter Esc Γ
REPORT
> AUTO ~ OFF ° EXPORT
° SEQUENCE ° SET-CLOCK
° SET-COUNT
Select ∆ ~ Enter Esc Γ
Mode AUTO ENGINE
> MAN ~ OFF ° LOAD-GEN
° EXPORT ° SEQUENCE
° SET-CLOCK ° SET-COUNT
Select ∆ ~ Enter Esc Γ
Mode MAN
Export Power Quotas
kW : 1200 kVar : 1200
Enter new value by 
Leave unchanged byΓ
EXPORT
IDS ∅ 2 ∅1 ∅3
This Gen-Set ID No = 1
Exchange Command 2,3
Initial sequence 0,0
SEQUENCE
Clock : 3 - 17.57
Note, Mon = 1… Sun = 7
Enter new value by 
Leave unchanged byΓ
SET-CLOCK
kW Hours : 00, 000,000
Hours Run : 000,000 : 80
Enter new value by 
Leave unchanged byΓ
SET-COUNT Mot de passe 1234
COMMAND
° AUTO- OFF ° OFF- MAN
° EXPORT ° SEQUENCE
° SET-CLOCK ° SET-COUNT
Select ∆ ~ Enter Esc Γ
DELAYS
> Set Overspeed = 3 ” 0
° Gen OverVolts = 1 ” 0
° Gen UnderVolts = 1 ” 0
° Gen OverFreq = 1 ” 0
SET/POINTS
> User Password = 1234
° Crancking attempts = 3
° Overspeed RPM = 1800
° Crankstop RPM = 400
BASICS
> Controller ID N° = 1
° Number of Poles = 4
° Pick-up Teeth = 126
° CT Ratio = 100.0
FACTORY Mot de passe :
Vx Volt Max = 260.4
° Ix Amps Max = 5.900
° B + Volt Max = 40.00
° D/A Volt Max = 7.432
OPTIONS
ABBREVIATIONS SUMMARY
question ? 0~NO, I~YES
Select AIB : 0~A, 1~B
S I W = shutdown I Warning
IN 1..16
In# : 1234567890123456
N/O :
N/C : ****************
Select ∆ ~ Enter Esc Γ
Battery Volts : 23.8
MPU : 1513 rpm 50.36 Hz
kW Hours : 00,001,234
HoursRun : 000,150 : 10
Gen Volts Amps Hz
Φ A 221 115 50.07
Φ B 222 117 >kW
Φ C 220 125 69.9 MAINS or BUS
Mains Φ Α
Frequency Hz : 50.14
Voltage Vrms : 223
Distorsion % THD : 0.1
SYNCscope
Gen Φ A v Mains (*) or BUS Φ A
Freq Slip Hz : -0.07
Phase Shift ° : 11
Voltage Match : -2
IN 1..16
SYSTEM
Function : Master
Network Ids : I----------
ANALOG OUT (V) : 1.58
PWM OUT (%) : 50.0
GENERATOR
> OVERVIEW ° POWER+PF
° GEN Φ A° GEN
ΦΦ ΒΒ
° GEN Φ C° GEN
ΦΦΦΦ
Select ∆~ EnterEsc⇔
MEASURE
> ENGINE ° GENERATOR
° MAINS or BUS ° SYNC scope
° IN 1..16 ° SYSTEM
Select ∆ ~ Enter Esc Γ
SET-UP
> DELAYS ° SET/POINTS
° OPTIONS ° IN 1..16
° BASICS ° FACTORY
Select ∆ ~ Enter Esc Γ
HELP
IOB1, Ver 2.5 H Mai 98
MICS Progress - SDMO
Contact : SDMO - FRANCE
Tél. N° 33 2 98 41 41 41
Led blink indicates :
Green ~ Activity
Yellow ~ Warning
Red ~ Shutdomn
OVERVIEW
Total- COS Φ (PF)
>kVA : 78.9 Φ A0.91
>kW : 69.9 Φ B0.88
>kWAr : 36.4 Φ C0.87
POWER + PF
Gen Φ A Hz : 50.07
Volts : 221 % THD :0.1
Amps : 115 kVAr :10.5
kVA : 25.4 kW :23.1
GEN ΦA ou ΦB ou ΦC
Gen Volts Hz : 50.07
Φ A 221 Φ AB : 384
Φ B 222 Φ BC : 383
Φ C 220 Φ CA : 382
(*) Suivant la sélection utilisée
dans SET-UP / OPTIONS
—> ATS = 0 ou ATS = 1
In# : 1234567890123456
On :
Off : ****************
RUN WITH LOAD : OFF
Press “enter”
to have the
list of the
options.
CODE
CODE
CODE
GEN ΦΦ
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd
TEL:[phone] FAX:[phone]

• The option selected is indicated by the cursor >
• Use the arrows to select the option required
• Press Enter to call the selected option
• Press Esc to return to the higher level menu.(main menu?)
OVERVIEW
This panel indicates the Progress operating mode and also
enables you to know which state the genset is in.
Example : mains failure, genset start-up – speed stabilisation –
voltage – synchronisation – load transfer – Shut down, cooling,
...
REPORT
This panel displays the various messages (alarms and faults)
recorded with their associated time. A maximum of 8 messages
can be recorded and viewed.
COMMAND
When the letters "OFF" are placed in front of "AUTO" and
"MAN", the Progress is stopped.
In the example, the Progress is in "AUTO" mode.
- MANual mode
Selecting "OFF - MAN" (see previous screen) enables you to go
to "MAN - OFF" mode. The genset starts immediately regard-
less of the position of the 4-position function switch.
Pressing "Enter" enables you to go from MAN —> OFF
to “OFF ~ MAN” and shuts down the genset after a cooling per-
iod..
Load-GEN
This function enables the genset to take the load.
The user password is required. It leads to the automatic closure
of the contactor.The message "OFF-LOAD" then appears.
OFF-LOAD
This function has the effect of opening the contactor.
02/99 7
MODE = AUTO TUE 22:37
Sets Runs With Load
Mains failure ∅Run !
Power source : GenSet
OVERVIEW
B – DESCRIPTION
OF DISPLAY PANELS
I – GENERAL PANEL :
> OVERVIEW ° REPORT
° COMMAND ° MEASURE
° SET/UP ° HELP
Select ∆ ~ Enter Esc Γ
HIGH WATER TEMP SHUT
Logged ∅Sat 17/06
Clear message by 
Select ∆ ~ Enter Esc Γ
REPORT
COMMANDES
> AUTO-OFF ° OFF- MAN
° EXPORT ° SEQUENCE
° SET-CLOCK ° SET-COUNT
Select ∆ ~ Enter Esc Γ
> MAN ~ OFF ° LOAD-GEN
° EXPORT ° SEQUENCE
° SET-CLOCK ° SET-COUNT
Select ∆ ~ Enter Esc Γ
Mode MANuel
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the
higher level menu
CODE
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

- AUTOMATIC MODE
When the password has been entered, the generating set :
- Starts immediately if the 4-position function switch is pla-
ced in
and if the mains is not available (information V4) (after lack of
mains has been confirmed).
- Starts immediately is the 4-position function switch is pla-
ced in
and if an external command activates input In#1.
- Starts immediately if the 4-position function switch is placed in
"TEST".
Validating the command "AUTO – OFF", after the password has
been entered, shuts down the genset after a cooling down per-
iod and makes the message go from AUTO ~ OFF to OFF ~
AUTO (shut down).
The 4-position switch is operative only if the Progress is in
AUTO mode.
- EXPORT
This screen can only be accessed in configurations #4, #5 and
#6 (connection to mains network). If the genset has not been
configured for these applications, the following message
appears: "NOT APPLICABLE".
(The entry of the 2 values, in kW and kVA, must be compatible
with the values of the genset power, in kW and kVA).
See REGLAGES BASE.
These 2 values define the power quotas exported by the genset
to the mains or installation (configuration function).
- SEQUENCE
This function applies to the MICS Progress in configuration #3
(production station, no mains)and when option "Parall auto
start" is selected.
It enables the order in which the gensets must start to be dis-
played and modified.
The first line indicates the starting sequence.
example : Genset No 2, then Genset No 1, then Genset No 3.
The second line indicates the MICS Progress No on which the
display is made.
The third line is used for any possible change of sequence.
example : 2,3 enables to get sequence 3’1’2 from sequence
2’1’3.
The fourth line provides aid during sequence changes.
- SET-HEURE
Time is not stored. It is therefore necessary to set the clock
(hour and day) when the MICS Progress is powered up in order
to get the messages time stamped.
8 02/99
> AUTO ~ OFF ° EXPORT
° SEQUENCE ° SET-CLOCK
° SET-COUNT
Select ∆ ~ Enter Esc Γ
AUTOmatic Mode
Export Power Quotas
kW : 1200 kVar : 1200
Enter new value by 
Leave unchanged by Γ
EXPORT
IDS ∅ 2 ∅1 ∅3
This Gen-Set ID No = 1
Exchange Command 2,3
Initial sequence 0,0
SEQUENCE
Clock : 3 - 17.57
Note, Mon = 1… Sun = 7
Enter new value by 
Leave unchanged by Γ
SET-HEURE
Press "Esc" to return to the higher
level menu
Password 1234
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
CODE
CODE
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

02/99 9
The first digit indicates the day (from 1 to 7).The next four digits
indicate the time ( Caution : AM and PM are never displayed).
- SET-COMPTE
This function is used to change the kW Hours and Hours Run
counters. The password must be entered to modify the values
displayed.
kW Hours : 00, 000,000
Hours Run : 000,000 : 80
Enter new value by 
Leave unchanged by Γ
SET-COMPTE
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the
higher level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the
higher level menu
Press "Esc" to return to the higher
level menu
MEASURE
> ENGINE ° GENERATOR
° MAINS ° SYNC scope
° IN 1..16 ° SYSTEM
Select ∆ ~ Enter Esc Γ
MEASURE
Main panel enabling viewing of the various possible readings on
the engine, alternator, mains or bus, synchronisation, logic sta-
tus of the various I/O, signal level on speed and voltage regula-
tion outputs.
- ENGINE
-
This screen indicates :
• Battery voltage, 40V maximum,
• Engine speed in RPM and frequency in Hz,
• Energy supplied in kWh (stored),
• Genset Hours Run (stored)
- MAINS or BUS – This screen indicates:
• Frequency in Hz (*),
• Phase/neutral voltage in Volts (*),
• Total harmonic distortion % (*).
(*) depending on the value of {mains control INS = 0 or 1}, the
values measured come from the mains or bus.
- GENERATOR
Main panel to view the electric variables relating to the alterna-
tor.
ENGINE
Battery Volts : 23.8
MPU : 1513 rpm 50.36 Hz
kW Hours : 00,001,234
HoursRun : 000,150 : 10
MAINS or BUS
Mains Φ Α
Frequency Hz : 50.14
Voltage Vrms : 223
Distorsion % THD : 0.1
GENERATOR
> OVERVIEW ° POWER+PF
° GEN Φ A° GEN
ΦΦ ΒΒ
° GEN Φ C° GEN
ΦΦΦΦ
Select ∆ ~ Enter Esc Γ
Gen Volts Amps Hz
Φ A 221 115 50.07
Φ B 222 117 >kW
Φ C 220 125 69.9
OVERVIEW
OVERVIEW
This screen indicates :
• Phase/neutral effective voltage and current for Phase
A,
• Phase/neutral effective voltage and current for Phase
B,
• Phase/neutral effective voltage and current for Phase
C,
• Frequency in Hz, total active power.
POWER + PF
This screen indicates :
• Total apparent power in kVA,
• Total active power in kW,
• Total reactive power in kVAr,
• Power factor on each phase (A, B and C).
Total COS Φ (PF)
>kVA : 78.9 Φ A0.91
>kW : 69.9 Φ B0.88
>kWAr : 36.4 Φ C0.87
POWER + PF
CODE
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

10 02/99
SYNCSCOPE
Gen Φ A v Mains Φ A
Freq Slip Hz : -0.07
Phase Shift ° : 11
Voltage Match : -2
IN 1..16
BASICS
Function : Master
Network Ids : I----------
ANALOG OUT (V) : 1.58
PWM OUT (%) : 50.0
Gen Φ A Hz : 50.07
Volts : 221 % THD :0.1
Amps : 115 kVAr :10.5
kVA : 25.4 kW :23.1
GEN ΦA ou ΦB ou ΦC
Gen Volts Hz : 50.07
Φ A 221 Φ AB : 384
Φ B 222 Φ BC : 383
Φ C 220 Φ CA : 382
GEN ΦΦ
GEN ΦA ou ΦB ou ΦC
This screen indicates for Phase A :
• Frequency in Hz,
• Effective voltage in Volts,
• Total harmonic distortion in %,
• Total active power in kW,
• Reactive power in kVAr,
• Apparent power in kVA.
Note: it is possible to view the screens for phases B
and C (from screen GENERATOR)
GEN ΦΦ
This screen indicates for the three phases :
• Phase A/neutral effective voltage in Volts,
• Phase B/neutral effective voltage in Volts,
• Phase C/neutral effective voltage in Volts,
• Phases A/ B, B/C and C/A effective voltages in
Volts.
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
SYNCSCOPE
This screen gives information on the synchronisation status bet-
ween the genset between the genset and the bus or the genset
and the mains.
• Voltage match : V1 – V4 (Volts) (line 4),
• Phase shift between these 2 voltages, in degrees (line 3),
• Frequency slip: frequency V1 – frequency V4 (line 2).
IN 1..16
This screen enables the status of each Progress logic input to
be viewed.
The cursor on the first line indicates the input title.
BASICS
This screen indicates whether the Progress concerned is "mas-
ter" or "slave".It also indicates the controller No (when there are
several networked Progresses) and the values for the speed
and voltage regulation outputs.
In# : 1234567890123456
On :
Off : ****************
RUN WITH LOAD : OFF
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

SET/UP
This screen shows all adjustable parameters, enabling
Progress to operate properly.
- DELAIS
This screen enables you to view and possibly modify the
various delays taken into account by Progress.
To scroll through, use the arrows and . To modify, use
and the keypad.
- SETPOINTS
This screen enables you to view and possibly modify the
various set-points taken into account by Progress.
To scroll through, use the arrows and . To modify, use
and the keypad.
- OPTIONS
This screen enables you to view and possibly modify the
various options offered by Progress.
An intermediate screen explains the various possible choices
and their abbreviations.
To scroll through the various options, press and use the
arrows and .
- IN 1..16
This screen enables you to change the logic status of the 16
inputs :
- normally open N/O
- normally closed N/C
- BASICS
This screen enables you to view and possibly modify the gen-
set general parameters.
To scroll through, use the arrows and . To modify, use
and the keypad.
- FACTORY
This screen is available only after entry of the factory code. It
defines the factory-set parameters.
SET UP
> DELAYS ° SET/POINTS
° OPTIONS ° IN 1..16
° BASICS ° FACTORY
Select ∆ ~ Enter Esc Γ
DELAIS
> Set Overspeed = 3 ” 0
° Gen OverVolts = 1 ” 0
° Gen OverVolts = 1 ” 0
° Gen OverVolts = 1 ” 0
SETPOINTS
> User Password = 1
° Crancking attempts = 3
° Overspeed RPM = 1650
° Crankstop RPM = 600
BASICS
> Controller ID N° = 1
° Number of Poles = 4
° Pick-up Teeth = 126
° CT Ratio = 100.0
FACTORY
Vx Volt Max = 260.4
° Ix Amps Max = 5.900
° B + Volt Max = 40.00
° D/A Volt Max = 7.432
OPTIONS
ABBREVIATIONS SUMMARY
question ? 0~NO, I~YES
Select AIB : 0~A, 1~B
S I W = shutdown I Warning
IN 1..16
In# : 1234567890123456
N/O :
N/C : ****************
Select ∆~ ToggleEscΓ
02/99 11
Press "Esc" to return to the
higher level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
Press "Esc" to return to the higher
level menu
CODE
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

II - SHORTCUTS :
To quickly access some menus, the 10 keys on the keypad, from version 2.5f, can be used if the system is
not being used for set-ups.
12 02/99
HELP
IOB1, Ver 2.5 H Mai 98
MICS Progress - SDMO
Contact : SDMO - FRANCE
Tél. N° 33 2 98 41 41 41
Led blink indicates :
Green ~ Activity
Yellow ~ Warning
Red ~ Shutdomn
Special push-button
STOP ~ Shutdown set
RESET ~ Stop alarm
RESET ~ Clear fault
HELP
This screen indicates the type of I/O interface that is connected
to Progress, the software version used and a telephone number
in the event of an operating problem.
Press to bring up the meaning of the LEDs on the front
panel.
Press this key again and you will get to this screen which gives
the function of buttons and .
KEY DESCRIPTION
0 General panel for generator (voltage, current, frequency for the 3 phases)
1 Direct access to screen "REPORT" to view faults and alarms.
2 Direct access to screen "OVERVIEW" giving single voltage and current for each phase
as well as frequency and total active power.
3 Direct access to screen "GEN ΦΦ" giving the 3 single voltages, the 3 phase-to-phase
voltages and frequency.
4 Direct access to screen "POWER + PF" giving total active, reactive, apparent powers
and power factor on each phase.
5 Direct access to screen "MAINS or BUS" giving the bus or mains main
parameters (depending on configuration chosen).
6 Direct access to screen "SYNCscope" giving information on the synchronisation status
of the genset onto another genset or the mains.
7 Direct access to screen "SYSTEM" giving indications on Progress: master, slave,
number as well as values of the speed and voltage analogue outputs.
8 Direct access to screen "ENGINE" giving the engine general parameters.
9 Direct access to screen "HELP" giving indications on the software version used and
the type of I/O interface.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

III - LIST OF PARAMÈTERS
02/99 13
A - DELAYS
Set Overspeed :
Overspeed delay.
GEN OverVolts :
Alternator overvoltage delay
GEN UnderVolts :
Alternator undervoltage delay
GEN OverFreq :
Alternator over frequency delay
GEN UnderFreq :
Alternator under frequency delay
G 2x OvCurr :
Delay assigned to the genset before overload triggering
G Revrse kW :
Delay assigned to the genset before triggering on an active reverse power
G Rvrs kVAr :
Delay assigned to the genset before triggering orse power
G Over % THD :
Delay assigned to the genset before triggering caused by a harmonic distortion rate higher than the set point.
SyncTimeout :
Delay assigned to the genset to synchronise on the mains or bus.
Sync Dwell Time :
Delay assigned to the parallel device to observe synchronisation, voltage equality, frequency equality and phase
shift.
kw Surge Enable :
Not used.
Test Delay :
Time the genset runs in test mode.
V4 Volts Status :
Delay to observe bus or voltage stability depending on the voltage configuration on V4.
Standby On :
Delay after mains failure before the genset starts in automatic mode with (control INS = 1).
Stanby Off :
Delay after mains return before load is removed from genset, in automatic mode with (control INS = 1).
Eng Preglow :
Delay for preheating of air intake glow plug(s) before start-up.
Engine crank :
Time for starter to trigger (period of one attempt).
CrankFail Rest :
Time between two start-up attempts.
Set Stabil Max :
Maximum delay assigned to the genset from starter throw-out to complete stabilisation in speed and voltage.
GE stabil min :
Minimum delay assigned to the genset from starter throw-out to closing of genset power delivery.
Coolin Down :
Engine cooling delay after genset is delivering power.
The equipment has been configured for a specific application. It is forbidden to modify the system
configuration without written consent of a person authorised by our company.
In the event of not respecting this procedure, our company disclaims all responsibility on the conse-
quences that could result from such action.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

14 02/99
Stoppin Max :
Time limit for closure of fuel solenoid to reach genset shut down conditions.
Alarm On Max :
Delay of R#3 relay activation (external audible alarm).
LubPump On :
Operating time of pre-lubricating pump.
LubPump Off :
Delay between 2 operations of the pre-lubricating pump..
LoadBreak >> Make :
ATS delay.
Contactor Delay :
Delay assigned to contactor between time of closure and return of information on Progress.
K # 7 On >> K # 8 On :
Use in configuration #3. Delay of closure which exists between commands K#7 and K#8 (outputs IOB1).
kW Quota ++ :
When Progress is in configuration #4 (mains paralleling) and In#16 not activated; time before the export quota in kW
increases.
kW Quota -- :
When Progress is in configuration #4 (mains paralleling) and In#16 not activated; time before the export quota in kW
decreases.
kVAr Quota ++ :
When Progress is in configuration #4 (mains paralleling) and In#16 not activated; time before the export quota in kVAr
increases.
kVAr Quota -- :
When Progress is in configuration #4 (mains paralleling) and In#16 not activated; time before the export quota in kVAr
decreases.
R # 1 Off >> On :
When option R#1 :Trip\kW Load is at 1, it is the time before relay #1 is excited.
R # 1 On >> Off :
When option R#1 :Trip\kW Load is at 1, it is the time before relay #1 is de-excited.
Parll Start :
When option Parall Auto Start is at 1, it is the delay assigned to the genset before its start-up on a load increase.
Parll Stop :
When option Parall Auto Start is at 1, it is the delay assigned to the genset before its shutdown on a load decrease.
LS Settling :
When option Parall Auto Start is at 1, it is the delay for 2 gensets to shut down after a significant decrease of load
.
B - SET POINTS
User Password :
The user must enter a 4-digit password to change the operating mode or to change parameters.
Cranking Attempts :
Number of start-up attemps.
Overspeed RPM :
Overspeed threshold depending on the engine rating.
CrankStop RPM :
Threshold of starter throw out depending on the type of starter used.
Bat OvVoltage :
Threshold of battery overvoltage authorised.
Bat UnVoltage :
Threshold of battery undervoltage authorised.
GEN OvVoltage :
Threshold of overvoltage applied to phase/neutral voltage.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

02/99 15
GEN UnVoltage :
Threshold of undervoltage applied to phase/neutral voltage.
GEN OvFrequen :
Threshold of alternator over-frequency authorised above the rated value.
GEN UnFrequence :
Threshold of alternator under-frequency authorised below the rated value.
GEN OvCurrent :
Threshold of alternator overload authorised above the rated value.
GEN Revrse kW :
Threshold of active reverse power authorised (1 phase value).
GEN Rvrs kVAr :
Threshold of reactive reverse power authorised (1 phase value).
GEN over %THD :
Authorised threshold of total harmonic distortion.
V4 Ov Voltage :
Threshold of overvoltage on mains or bus side, applied to the phase/neutral voltage.
V4 Un Voltage :
Threshold of undervoltage on mains or bus side, applied to the phase/neutral voltage.
V4 Ov Frequen :
Threshold of over-frequency on mains or bus side which is authorised above the rated value.
V4 Un Frequen :
Threshold of under-frequency on mains or bus side which is authorised below the rated value.
Mains kW Surge :
Not used (to be set to a value higher than the genset power).
Bus kW Surge :
Reference analogue voltage for the rated speed.
Gov Volt Bias :
Phase shift authorised for the paralleling of V1 and V4 (V1 = genset phase 1 voltage – V4 = mains or bus phase 1
voltage).
SYNC Window V :
Voltage difference authorised for the paralleling of V1 and V4 (V1 = genset phase 1 voltage – V4 = mains or bus
phase 1 voltage).
SYgain V/180° :
Value of off load synchronisation gain.
>> SYg V/180° :
Value of on load synchronisation gain.
SYstbl V/Hz :
Value of stability in off load synchronisation.
>> SYs V/Hz :
Value of stability in on load synchronisation.
SYgain %P/V :
Value of synchronisation gain in off load voltage.
>> SYg %P/V :
Value of synchronisation gain in on load voltage.
LSgain V/Xre :
Value of gain in distribution of active load.
LSstbl V/Xre :
Value of stability in distribution of active load.
LSgain % P/Xap :
Value of gain in distribution of reactive load.
LSstbl % P/Xap :
Value of stability in distribution of reactive load.
Ramp +kW/Sec :
Value in kW/sec which is imposed on the generator during load transfer phases from the mains to the genset or bet-
ween gensets. Adjustment kW by kW is possible.
Ramp -kW/Sec :
Value in kW/sec which is imposed on the generator during load transfer phases from the genset to the mains or bet-
ween gensets. Adjustment kW by kW is possible.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

16 02/99
Ramp +kVAr/Sec :
Value in kVAr which is imposed on the generator during load transfer phases from the mains to the genset or bet-
ween gensets. Adjustment kVAr by kVAr is possible.
Ramp -kVAr/Sec :
Value in kVAr which is imposed on the generator during load transfer phases from the genset to the mains or bet-
ween gensets. Adjustment kVAr by kVAr is possible.
kW Quota ++ :
Value, on external request, of power in kW/sec which is imposed on the generator.
kW Quota -- :
Value, on external request, of power in kW/sec which is imposed on the generator.
In # 00 >> kW Quota ++ :
By replacing In#00 by 06, 08, 09 or 12, and if it has not been already allocated, the chosen input enables to make a
dynamic check of the power (kW).
In # 00 >> kW Quota -- :
By replacing In#00 by 06, 08, 09 or 12, and if it has not been already allocated, the chosen input enables to make a
dynamic check of the power (kW).
kVAr Quota ++ :
Value, on an external request, of power in kVAr/sec which is imposed on the generator.
kVAr Quota -- :
Value, on an external request, of power in kVAr/sec which is imposed on the generator.
In # 00 >> kVAr Quota ++ :
By replacing In#00 by 06, 08, 09 or 12, and if it has not already been allocated, the chosen input enables to make a
dynamic check of the power (kVAr).
In # 00 >> kVAr Quota -- :
By replacing In#00 by 06, 08, 09 or 12, and if it has not already been allocated, the chosen input enables to make a
dynamic check of the power (kVAr).
% kW / Xre >> R # 1 On :
Not used.
% kW / Xre >> R # 1 Off :
Not used.
+ % kW / Xre >> Start :
Value expressed as a percentage of the genset power that allows the next genset to start-up in a sequence (only
used in configuration #3 with automatic program "Parall Auto Start"). See "Standard applications".
+ % kW / Xre >> Stop :
Value expressed as a percentage of the genset power that allows the next genset to shut down in a sequence (only
used in configuration #3 with automatic program "Parall Auto Start"). See "Standard applications".
Exclude Net IDs :
Allows the exclusion from the network of a certain number of gensets according to the ID Nos (number of gensets).
In # 06 Excludes :
Option at (1) enables to isolate a genset from the RS 485 network by activating input In#6.
Option at (0) enables to use input In#6 in a standard way.
In # 08 Excludes :
Option at (1) enables to isolate a genset from the RS 485 network by activating input In#8.
Option at (0) enables to use input In#8 in a standard way.
In # 09 Excludes :
Option at (1) enables to isolate a genset from the RS 485 network by activating input In#9.
Option at (0) enables to use input In#9 in a standard way.
In # 12 Excludes :
Option at (1) enables to isolate a genset from the RS 485 network by activating input In#12.
Option at (0) enables to use input In#12 in a standard way.
C - OPTIONS - IDENTIFYING BY {.....}
Write Protect...!? :
Selection (0) : all parameters defined in SET-UP are accessible to read and to modify.
Selection (1) : all parameters defined in SET-UP are only accessible to read.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

02/99 17
RMS use Harmonics ? :
Selection (0) : calculation of root mean square values (current and voltage) is made by only taking into account the
fundamental frequency.
Selection (1) : the calculations use the whole harmonic content.
Not in auto warn ? :
Energize Run/Stop : Corresponds to the control mode of the fuel solenoid.
(0) : for a de-energised solenoid.
(1) : for an energised solenoid.
Cool after NoLoad ? :
(0) : puts the engine into forced cooling.
(1) : puts the engine into forced cooling if, and only if, the genset contactor is closed, when the opening command is
requested.
Bat OverVolts S/W :
(0) :The battery overvoltage is configured as a fault (engine shut down).
(1) :The battery overvoltage is configured as an alarm (no engine shut down).
GEN UnderVolt S/W :
(0) :The alternator undervoltage is configured as a fault (engine shut down).
(1) :The alternator undervoltage is configured as an alarm (no engine shut down).
GEN UnderFreq S/W :
(0) :The alternator under frequency is configured as a fault (engine shut down).
(1) :The alternator under frequency is configured as an alarm (no engine shut down).
LowWaterLevel S/W : On activation of input In#10, LOW WATER LEVEL, the option at :
(0) : leads to engine shut down (fault).
(1) : does not lead to engine shut down (alarm).
Ext. Overload S/W : On activation of input IN#14, "External overload", the option at :
(0) : leads to engine shut down (fault).
(1) : does not lead to engine shut down (alarm).
GENCON low DC S/W : On sensing a low level of supply voltage :
(0) : leads to engine shut down (fault).
(1) : does not lead to engine shut down (alarm).
Generic configure ? : Choosing this option allows to make specific applications which are not defined in the docu-
ment "Standard Applications", No 33502002401.
Parallelin System ? : The option configured at (1) enables the use of all synchronisation functions for paralleling
and distribution.
Mains Standby ATS ? : The option configured at (1) enables the use of applications requiring a MAINS/STANDBY
changeover.
Cogeneration Mode ? :
The option configured at (1) enables the operation in "resell" mode.
Parall auto Start ? :
The option configured at (1) is used in configuration #3 for the start-up of the gensets depending on the level of
power on the installation.
Engine Diesel/Gaz :
(0) : use for diesel engines.
(1) : use for gas engines.
Generator Syn /Asy :
(0) : use for synchronous generators (self excited).
(1) : use for asynchronous generators.
In # 3 Sleep / Bypass :
(0) : activating input In#3 in automatic mode stops the genset.
(1) : activating input In#3 inhibits the safety devices which stop the genset (except for overspeed) (use for safety gen-
sets).
Sleep clears faults ? : The option at :
(1) : When going from AUTO mode to SLEEP mode, activating input In#3 has the effect to cancel the faults.
Check contactors ? :
(0) : controlling the closure of mains and genset contactors in relation to the command is not made.
(1) : controlling the closure of mains and genset contactors in relation to the command is made.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd

18 02/99
Motor contactors ? : The option at :
(0) : indicates that the power component(s) are controlled in a classic way (e.g. contactor).
(1) : indicates that the power component(s) are controlled by an electric motor with shut-off solenoid and open sole-
noid (motorized switch or motorized open-type breaker).
R # 1 Shunt/kw load :
(0) : relay R#1 is used to signal a fault.
(1) : relay R#1 is used for load control applications.
R # 2 Alarm/ Useable :
(0) : luminous alarm.
(1) : optional use.
K # 6 Engine/GEN on :
Output K#6 is supplied in the two following cases :
(0) : when the engine is running : speed 60 rpm or frequency 15 Hz.
(1): when the generator voltage is high, i.e.V1, V2 and V3 Gen Unvoltage.
K # 8 Delay/neutral : This option is only used in configuration #3 :
(0) : relay K#8 (IOB1 interface) is activated after relay K#7 (IOB1 interface) depending on the preset delay. Relay K#8
is deactivated at the same time as K#7.
(1) : Not used.
kW Drop=LoadSurge :
Not used.
Smooth Mains>>GEN ? :
Not used.
In # 06 Aux Shutdn ? :
Enables the use of alarm inputs for unused optional faults.
In # 08 Aux Shutdn ? :
Enables the use of alarm inputs for unused optional faults.
In # 09 Aux Shutdn ? :
Enables the use of alarm inputs for unused optional faults.
In # 12 Aux Shutdn ? :
Enables the use of alarm inputs for unused optional faults.
D - BASICS - GENERAL PARAMETERS
Controller ID No :
Progress ID, between 1 and 8. A unique value must be allocated to each Progress that is connected to the RS 485
communication bus (use in configuration #3 only).
Number of poles :
Number of pairs of rotor poles (always an even number).
PickUP Teeth :
Number of teeth on the flywheel. This value is used to calculate the engine rotation speed (for display).
CT Ratio :
Transformation ratio of the current transformers. For example, a 160 ratio corresponds to a 800A/5A current transfor-
mer.
Pt Ratio :
Transformation ratio of the potential transformers for use with average voltage.The minimum value to enter is 16.
Xap : Rated kVA :
The genset power expressed in kVA.
Xre : Rated kW :
The genset power expressed in kW.
Adj Sec/Week :
Real time clock adjustment specified in seconds per week.
Http://www.xinke-hk.com
ShenZhen XinKe power equipment Co .Ltd