Xintai F-Series Operation instructions
F-series Assemble User Manual
Accessory list (as below pic):
1. X axis transmitting tub：1 PCS
2. Y axis transmitting tub：1 PCS
3. Y axis receiving tube：1 PCS
4. X axis receiving tube：1 PCS
5. Screws (KM2.5×4mm) ：14Pcs (2pcs backup)
Step1 :
Match the NO. on the touch frame (No. A match No.A, No.B match No.B, No.C match No.C ,No.D
match No.D)
Step2:
Open the cover of each corner (as below)
Step3:
Connect the spare part via the 10pin connector and fix the cover of corner
Step 4 :
According to the same principle, repeat the corner B,C,D and finish the assembling as below.
Attention:
1. Must open the cover of the corner before connecting the frame (as below) , in case the 10 pin
connector broke.
