XLOCK 140 User manual

XLOCK 140
INSTALLATION Guide
MTA_9 344 407 00

2
4 x screws for lock,
countersunk head 3.5 x 35 mm. 3 x screws for locking part
countersunk head 2.5 x 12 mm.
Closing part
XL-S17
Lock
XL140
Always use lithium
batteries!
Attention:
Please order batteries
separately.
2 x CR123A ,
6V lithium batteries
PACKAGING CONTENTS

DIMENSIONS
Lock
XL140
Closing part
XL-S17
3

2 pieces CR123A, 6V lithium
batteries.
For error-free operation, please
always use lithium batteries!
4
PREPARATION FROM THE LOCK
Open the battery compartment
cover and insert the batteries
with the correct polarity (+/-).
Close the battery
compartment cover and fix it
with the screw.
Your lock is now ready
for use.

XL Lock Manager App and on the
Install smartphone (IOS + Android).
Simply scan the QR code with your camera:
After installation, create your XLOCK account
and confirm in the e-mail - > done.
INSTALL THE APP AND CREATE AN ACCOUNT
Attention for Android devices:
For Android devices, the following permissions must be granted without restrictions for
the commissioning of Bluetooth devices: Location and Bluetooth
In retrospect, this is no longer possible with some devices. Then you have to uninstall
and reinstall the app and then restart the device.
For the commissioning of an XLOCK lock, the location and Bluetooth must be activated
in the Android system! 5

CREATE ACCOUNT
1. Tap the button above.
6
2. Enter your email address and
choose a password. To confirm,
password again
type. Tap Register.
3. Verify your account by clicking on the
confirmation link in the XLOCK e-mail in
your e-mail inbox
button. It may be that the confirmation email
has landed in your spam folder.
4. Congratulate! You
have successfully
installed the XL LOCK
Manager app.

ADD NEW LOCK IN YOUR ACCOUNT
1. Tap the button at the
bottom right corner. 2. Tap New Lock.
3. Have XLOCK lock
ready? Press and hold
the reset button with a
screwdriver.
5. Give the lock a
name and tap ADD.
6. The XLOCK lock has now
been successfully linked to
the XLOCK APP and is visible
on the start screen.
4. The lock is displayed
with its ID number. Tap
on the green one to
add your XLOCK.
7

8
Unlocking with the smartphone and the app is very simple.
A swipe to the right unlocks the lock for 5 seconds. The
reading distance is up to 15 meters. Therefore, the lock
can also be installed hidden, e.g. behind a drawer. The
toggle mode (open-close function) can also be used with
the smartphone. This function is activated and deactivated
in the app in the lock menu.
UNLOCK - LOCK

VIEW MOUNTING LEFT / RIGHT
Left
9
Right
The direction of the locking latch can be changed, please specify when
ordering.

XLOCK 140 MOUNTING LEFT
Mounting - Left
10
 









Mounting the lock
Tighten the screws with feeling and do not use drills or cordless
drill or cordless screwdriver.

XLOCK 140 MOUNTING RIGHT
11
Mounting - Right









 
Mounting the lock
Tighten the screws with feeling and do not use drills or cordless
drill or cordless screwdriver.

XLOCK GATEWAYS
XLOCK Gateway G2-WIFI incl.
USB C charging cable.
2.4 GHz WIFI compatible USB
power supply required
XLOCK Gateway G3-
Ethernet incl. USB C charging
cable.
USB power supply required
XLOCK Gateway G3 POE-Ethernet
incl. USB C charging cable.
POE does not require a separate
power supply
Optional! Please order separately.
12

With the Wireless Key and the Wireless Keypad, the lock can be
unlocked over a distance of up to 20 meters - cable-free.
The wireless keypad can be used to program all XLOCK pin code functions
such as fixed, time and one-time code.
13
XLOCK BLE
Wireless keyboard
XLOCK BLE
Wireless key
BLUETOOTH ACCESSORIES
Optional ! Please order separately.

More information and support at
www.xlockgroup.com
XLOCK by data mobile
Landstrasse 35-39
AUT –6911 Lochau
[email protected]
www.xlockgroup.com