XPower 8885725 User manual

20V Cordless Pressure washer User's Manual
Model: 8885725

SAVE THESE INSTRUCTIONS
CAUTION Read the instructions before using the appliance.
Please read and comply with these original instructions prior to the initial operation of your
appliance and store them for later use or subsequent owners.
Apart from the notes contained herein the general safety provisions and rules for the prevention of
accidents of the legislator must be observed.
Warnings and notes that are attached on the appliance provide important notes for the safe operation.
Hazard levels
WARNING
Pointer to a possibly dangerous situation, if not avoided, which can lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, if not avoided, which can lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can lead to property damage.
General Safety
WARNING
This appliance is not intended for use by children or by unassisted, unsupervised persons whose
physical, sensory, or mental capabilities prevent them from using it safely. Children should be
supervised to ensure that they do not play with the appliance.
The user must be the appliance as intended. The person must consider the local conditions and must
pay attention to other persons in the vicinity when working with the appliance.
Check important components, such as hose, spray wand and safety installations, for damage prior to
every operation. Immediately replace damaged components. Do not operate appliance with damaged
components.

The appliance has been designed for use with the cleaning agent supplied or recommended by the
manufacturer. The use of the other cleaning agents or chemicals may adversely affect the safety of the
appliance.
Pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live
electrical equipment containing electrical components, such as the interior of ovens.
Do not use in swimming pools containing water.
CAUTION
Know how to stop the product and bleed pressure quickly. Be thoroughly familiar with the controls.
Stay alert- watch what you are doing
Do not operate the product when fatigued or under the influence of alcohol or drugs.
Never leave the appliance running when unattended.
Other risks
WARNING
The appliance may not be operate in explosive atmospheres.
Risk of explosion-Do not spray flammable liquids.
Never draw in fluids containing solvents or undiluted acids and solvents! This includes petrol, paint
thinner and heating oil. The spray mist is highly inflammable, explosive and poisonous. Do not use
acetone, undiluted acids and solvents, as they corrode the materials used on the appliance.
Never use the product with inflammable or toxic liquids, or liquids with characteristics incompatible with
its proper operation.
Keep packaging films away from children, there is a risk of suffocation!
CAUTION
According to applicable regulations , the appliance must never be used on the drinking water net
without a system separator. Ensure that the connection of your building water installation on which the
pressure cleaner is operated is equipped with a system separator pursuant
Water that has flown through backflow preventers is considered to be non-potable.

To ensure applicable safety, use only original spare parts from the manufacturer or approved by the
manufacturer.
WARNING Hoses, fittings and couplings are important for the safety of the machine. Use only hoses,
fittings and couplings recommended by the manufacturer
CAUTION
Several hours of continuous use of the appliance can lead to numbness in the hands in rare cases.
The improper use of detergents can cause severe injuries or oxidation.
Store cleaning agent away from the reach of children.
Discharge residual pressure before disconnecting the hose from the product.
Check before each use , and at regular intervals, that all metal fasteners are tight and the product’s
components are in good condition; inspect for broken or worn parts.
Appliance is only to be used with the battery charger provided.
Safety for Battery Pack
WARNING
The following represents a typical, but not exhaustive list of good advice to be provided by the
equipment manufacturer to the end-user.
a) Do not dismantle, open or shred secondary cells or batteries.
b) Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
c) Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box
or drawer where they may short-circuit each other or be short-circuited by other metal
objects.
d) Do not remove a cell or battery from its original packaging until required for use.
e) Do not subject cells or batteries to mechanical shock.
f) In the event of a cell leaking, do not allow the liquid to come in contact with the skin or
eyes. If contact has been made, wash the affected area with copious amounts of water
and seek medical advice.
g) Do not use any charger other than that specifically provided for use with the equipment.
h) Observe the plus (+) and minus (–) marks on the cell, battery and equipment and ensure
correct use.
i) Do not use any cell or battery which is not designed for use with the equipment.

j) Do not mix cells of different manufacture, capacity, size or type within a device.
k) Battery usage by children should be supervised.
l) Seek medical advice immediately if a cell or a battery has been swallowed.
m) Keep cells and batteries clean and dry.
n) Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
o) Secondary cells and batteries need to be charged before use. Always use the correct
charger and refer to the manufacturer’s instructions or equipment manual for proper
charging instructions.
p) Do not leave a battery on prolonged charge when not in use.
q) After extended periods of storage, it may be necessary to charge and discharge the cells
or batteries several times to obtain maximum performance.
r) Retain the original product literature for future reference.
s) Use only the cell or battery in the application for which it was intended.
t) When possible, remove the battery from the equipment when not in use.
u)Do not put it in heat above 60℃. Do not use it if serious expansion occurs.
v)The battery used in this device may present a risk of fire or chemical burn if mistreated. Replace
battery with YILI only, use of another battery may present a risk of fire or explosion.
w)Do not use a visibly damaged battery pack
x)Do not modify or attempt to repair the appliance or the battery pack as applicable.
y)Disconnect the battery pack from the appliance before making any adjustments, changing
accessories, or storing appliance. The preventive safety measures reduce the risk of starting the
appliance accidentally.
z)The battery pack must not be disposed together with the domestic waste. It has to be disposed at an
authorized place for recycling of electrical and electronic appliance.
Safety Devices
CAUTION
Safety installations serve the protection of the user and may not be modified.
Lock trigger gun
This lock locks the lever of the trigger gun and prevents the inadvertent start of the appliance.

Switch
If the lever on the trigger gun is released the pressure switch turns off the pump, the pressure jet is
stopped. If the lever is pulled the pump is turned on again.
Symbols on the machine
The high pressure jet must not be directed at persons, animals, live electrical
equipment or at the appliance itself.
The appliance must not be directly connected to the public drinking water network.
Batteries contain lithium, In order to protect the environment, waste batteries
should be recycled separately and not be disposed together with the domestic waste
Proper use
Use this pressure cleaner for private households only:
If connection is made to a potable water system, the system shall be protected against backflow.
This pressure cleaner is designated to use of this product covers the cleaning of vehicles, tools,
terraces, facades and garden equipment using clean water and biodegradable chemical detergents.
Likewise the product can be used to clean paving slabs or rain gutters.
The water jet should not be directed against persons. Animals, any electrical equipment . Do not flush
any objects which contain health hazardous materials. The product must not be run with inflammable,
explosive and toxic liquids.
For safety reasons it is essential to read the entire instruction manual before first operation and to
observe all the instructions there in.

Description of the Appliance
1. Trigger gun
2. Safety lock
3. Adjust switch OFF/ON
4. Battery pack
5. Spray wand
6. 3 in 1 Nozzle
7. Battery charger
8. Suction hose
9. Water inlet
10. Adjust switch pressure
Technical specifications
Voltage 20V/ Cordless
Power 1/5HP
Charge Capacity 2Ah
Degree of protection IPX0
Rated pressure 340PSI
Max. pressure 360PSI

Max. inlet pressure: 100PSI
Weight 3.8LBS
Assembly
Mount loose parts delivered with appliance prior to start-up
1. Installing the battery pack
2. Installing the spray wand
• Fit the spray wand into the gun and rotate it until the two parts are completely locked.

3. Connect the inlet hose to the water inlet
Connect the suction hose adaptor(female coupler) to the water inlet of the pressure cleaner, then
thread your suction hose(male end) into the open reservoirs .
Start up
If the appliance does not operation within 1 minute, disconnect the main then check it according to the
instructions in Chapter “Troubleshooting”.
Water supply
ATTENTION

Impurities in the water can damage the pressure pump and the accessories.
Water supply from mains, or drawing in water from the open reservoirs
Insert the suction hose connection into the appliance in place of the fine filter.
Put the suction hose with the integrated filter into the water source.
This pressure cleaner is suited to work with the YILI suction hose to draw in surface water, e.g. from
water butts or ponds.
Operation
ATTENTION
Dry running of appliance leads to damage of the pump. If the appliance does not build up pressure
within 1 minutes, switch the appliance off and proceed in accordance with the instructions in Chapter
“Troubleshooting”
ATTENTION
Connect the product to battery pack and water supply as described.
• Hold the trigger gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards the surface to be cleaned.
• First press the safety lock(1) and don't loosen it , then press the switch(2) of the trigger gun until a
constant amount of water flows through the nozzle, to allow air trapped in the hose to escape.

• If want to adjust the pressure, you can touch the switch.
Release the switch of the trigger gun; the appliance will switch off again and stop the water jet.
Operation with detergent (optional)
Detergent can only be added when the appliance is operated in low pressure mode.
When using detergents, the material data safety sheet issued by the detergent manufacturer must be
adhered, especially the instructions regarding personal protective equipment.
Fill the tank with detergent designed specifically for use with pressure cleaners.
Connect the detergent bottle with the detergent to trigger gun.
After operation with detergent

• When finished using the pressure cleaner, you must remove the detergent bottle from the trigger gun,
then drain residual the detergent and rinse the detergent tanks with clean water.
• Factory of the pressure cleaner is not responsible for the damage caused by detergent or any
chemical agent.
Interrupting operation
• Release the safety lock of the trigger gun.
•Battery pack is empty.
• Nozzle partially blocked
Finish operation
• Release the switch of the trigger gun.
• Separate the inlet hose from the appliance when there is no pressure in the system.
• Release the battery pack from appliance.
• Separate the 3 in 1 nozzle、spray wand from the trigger gun
ATTENTION
• When disconnecting the spray wand, warm water may leak from the connection after operation.
Storage
Storing the appliance
Consider the weight of the appliance when storing it.
• during the winter, also observe the instructions in the care section.
• Always store the pressure cleaner, parts, and accessories in a place that is inaccessible to children.
The ideal storage temperature is between 10 °C and 30 °C. Store the cleaner indoors to prevent the
water in the unit from expanding under freezing conditions.
• We recommend using the original package for storage or covering the product with a suitable cloth or
enclosure to protect it against dust.

Care and maintenance
Turn the appliance off and disconnect from the battery pack after operation
Clean the valve opener and fine filter
Valve opener and filter must not be damaged.
Remove the valve opener and fine filter using the suction hose connection.
Clean the valve opener and fine filter under running water.
Reinsert the fine filter and valve opener.

Troubleshooting
Turn off the appliance and remove the main plug prior to performing any care and maintenance work.
Repair work and work on the electrical components may not only be performed by an authorized
customer service. You can rectify minor faults yourself with the help of the following overview. If in
doubt, please consult the authorized customer service.
Symptom Cause Recommended action
M
achine refuses to start Battery is empty
Battery is protected
Charging battery until green light.
T
urn On/Off switch to check if the unit
s
tarts
Fluctuating pressure Pump sucking ai
r
V
alves dirty, worn out or stuck
Pump seals worn out
Check that hoses and connections are
a
irtight.
Clean and replace or refer to local
d
istributor
Clean and replace or refer to local
d
istributo
r
Machine stops Battery is empty
Nozzle partially blocked
.Recharge
Clean the nozzle
Machine pulsating
A
ir in inlet hose
Inadequate supply of mains wate
r
Nozzle partially blocked
W
ater filter blocked
Hose kinked
A
llow machine to run with open trigger
until regular working pressure resumes.
Disconnect the high-pressure hose and
t
he trigger.
Check that the water supply corresponds
t
o specifications required
NB! Avoid using long, thin hoses (min.
1/2").Clean the nozzle /Clean the filter
Straighten out hose.
Machine starts, but no water
comes out
Pump/hoses or accessory frozen
No water supply
W
ater filter blocked
Nozzle blocked
W
ait for pump/hoses or accessory to
t
haw. Connect inlet water.
Clean the filter
Clean the nozzle

Accessories
Only use original accessories and spare parts, they ensure the safe and trouble-free operation of the
appliance. For information about accessories and spare parts, please visit YILI web.
Warranty
1. This product has been manufactured to a high quality standard. The warranty period is 3 months
from date of purchasing.
2. For warranty service, please contact the present the warranty card and the original invoice for the
warranty service.
3. This warranty DOES NOT applies to: O-rings, seals, valves, nozzles, filters, damages to hose, gun,
pump, motor, housing shells due to misuse, operation errors, or exposure to natural elements.
4. Transportation damages after sales.
5. Services not provided by our authorized service centers.
6. Accessories and spare parts, if any, provided in the package.
7. Damage resulted from commercial or industrial use, as this product is intended for DIY use only.
Environmental protection
Old appliance contain valuable recyclable materials that should be recycled properly. Batteries
and accumulators contain substances that must not enter the environment. Please dispose of old
appliances and batteries in an authorized place for recycling of electrical and electronic appliance and
in an environmentally friendly way.
Electrical and electronic devices often contain components which could potentially pose a danger to
human health and the environment if handled or disposed of incorrectly. However, these components
are necessary for the proper operation of the appliance. The appliance marked with this symbol must
not be disposed of with regular household rubbish.