Operation
1. Install battery.
Unscrew flashlight, and install the battery with
positive pole (+) towards head.
2. Choose brightness.
Move switch forward or backward to adjust
brightness.
Customer service
● 15 days free replacement.
● 24 months free repair. If problems develop
beyond 24 months, we will offer free repair
service but charge for parts used. The distributor
will inform you material fee or related freight if
any before repair.
● Lifetime technical support.
Note
1. Damage caused by misuse or intentional force
is not covered by the warranty.
2. You are recommended to store warranty info
online: register and login www.xtar.cc - Member
Center - Warranty Information.
3. Warranty number can be found on the
package or product.
Global After-sales Email: service@xtar.cc
US After-sales Email: serviceus@xtar.cc
1. Scratch the anti-counterfeiting label on the
package to get 18-digit number.
2. Input the number into the query page on
www.xtar.cc (Contact Us - Anti-fake).
Warning: Do not radiate the light
directly towards the eyes, serious injury
or blindness could occur by misuse.
Anti-fake inquiry
Please provide warranty number and receipt
to dealer to get after-sales service.
45 6
Tip
1. Please make sure positive pole (+) towards the
head.
2. Considering flashlight consumes power when it
is off, please unscrew tail and move switch to
bottom.
3. To avoid top lightness will be influenced or LED
flashes, and please move the switch equally.
4. Do not wipe the battery with strong corrosive
substance.
5. Flashlight fails to operate.
Possible Reasons Solutions
Battery is exhausted or
not compatible
Poor contact
Change battery
1. Clean the contact
surface of battery
with alcohol
2. Tighten the head
or tail cap
6. For more and updated information, please visit
www.xtar.cc
3
Battery is installed
incorrectly Make sure positive
pole toward the head
