Xtool X100PAD PLUS User manual

Shenzhen Xtooltech Intelligent Co., LTD
X100PAD PLUS
Auto Key Programmer
User Manual

I
Please read this user manual carefully before using the X100PAD
PLUS Auto Key Programmer. When reading the manual, please
pay attention to the words “Note” or “Caution” and read them
carefully for appropriate operation.
TRADEMARKS
is a registered trademark of Shenzhen Xtooltech
Intelligent CO., LTD.
In countries that the trademarks, service marks, domain names,
logos and the name of the company are not registered, Xtool claims
that it still reserves the ownership of the unregistered trademarks,
service marks, domain names, logos and the company name. All
other marks for the other products and the company’s name
mentioned in the manual still belong to the original registered
company.
You may not use the trademarks, service marks, domain names,
logo and company name of Xtool or other companies mentioned
without written permission from the trademark holder.
Xtool reserves the right for the final interpretation of this manual
content.

II
COPYRIGHT
Without the written consent of Shenzhen Xtooltech Intelligent Co.,
Ltd., any company or individual shall not copy or backup this
operation manual in any form (electronic, mechanical, photocopying,
recording or other forms).
DECLARATION
This manual is designed for the usage of X100PAD PLUS Auto Key
Programmer, and provides operating instructions and product
descriptions for users of the X100PAD PLUS Auto Key Programmer.
No part of this manual can be reproduced, stored in a retrieval
system or transmitted, in any form or by any means (electronic,
mechanical, photocopying, recording, or otherwise), without the
prior written permission of Xtool.
Use the device only as described in this manual. Xtool is not
responsible for any consequences of violating the laws and
regulations caused by using the product or its data information.
Xtool shall not be liable for any incidental or consequential damages
or for any economic consequential damages arising from the
accidents of individual users and the third parties, misuse or abuse

III
of the device, unauthorized change or repair of the device, or the
failure made by the user not to use the product according to the
manual.
All information, specifications and illustrations in this manual are
based on the latest configurations and functions available at the
time of printing. Xtool reserves the right to make changes at any
time without notice.
OPERATION INSTRUCTIONS
For safe operation, please follow the instructions below:
 Keep the device away from heat or fumes when you are using it.
 If the vehicle battery contains acid, please keep your hands and
skin or fire sources away from the battery during testing.
 Exhaust gas of vehicle contains harmful chemicals, please
ensure adequate ventilation.
 Do not touch the cooling system components or exhaust
manifolds when engine is running due to the high temperatures
reached.

IV
 Make sure the car is securely parked, Neutral is selected or the
selector is at P or N position to prevent the vehicle from moving
when engine starts.
 Make sure the (DLC) diagnostic link connector is functioning
properly before starting the test to avoid damage to the
Diagnostic Tablet.
 Do not switch off the power or unplug the connectors during
testing, otherwise you may damage the ECU and/or the
Diagnostic Tablet.
CAUTIONS!
 Avoid shaking or dismantling the unit as it may damage the
internal components.
 Do not use hard or sharp objects to touch the LCD screen;
 Do not use excessive force;
 Do not expose the screen to strong sunlight for a long period.

V
 Please keep it away from water, moisture, high temperature or
very low temperature.
 If necessary, calibrate the screen before testing to ensure the
accuracy of LCD performance.
 Keep the main unit away from strong magnetic fields.
AFTERSALES-SERVICES
E-Mail: [e-mail]
Tel: [phone] or [phone] (China)
Official Website: www.xtooltech.com

i
CONTENT
TRADEMARKS ..............................................................................I
COPYRIGHT .................................................................................II
DECLARATION ............................................................................II
OPERATION INSTRUCTIONS .................................................... III
CAUTIONS! ................................................................................ IV
AFTERSALES-SERVICES .......................................................... V
1 GENERAL INTRODUCTION ..................................................4
X100PAD PLUS Tablet ............................................................................. 5
Front View of Tablet ........................................................................................................................................... 5
Back View of Tablet ............................................................................................................................................ 6
Host Ports ............................................................................................................................................................... 7
EEPROM Adapter ..................................................................................... 7
Technical Specifications ......................................................................... 9
2 GETTING STARTED ............................................................ 10
Activation Guide ..................................................................................... 10
Main Interface ......................................................................................... 15
Operation System .............................................................................................................................................. 15
X100PAD PLUS App Menu ............................................................................................................................. 18
Function Buttons ................................................................................................................................................ 19
Navigation Buttons ........................................................................................................................................... 20
Notification Bar .................................................................................................................................................. 21
3 UPDATE............................................................................... 22

ii
4 KEY PROGRAMMING ......................................................... 23
Vehicle Connection ................................................................................ 23
Immobilizer Menu ................................................................................... 24
Immobilizer Functions ........................................................................... 25
Read PIN code/Pin Code Calculation ......................................................................................................... 25
Check Number of Keys .................................................................................................................................... 28
Add Keys ............................................................................................................................................................... 29
All Key Lost .......................................................................................................................................................... 33
5 DIAGNOSIS ......................................................................... 37
Vehicle Selection .................................................................................... 37
Diagnose Functions ............................................................................... 40
6 SPECIAL FUNCTIONS ........................................................ 43
EEPROM Adapter ................................................................................... 44
Oil Light Reset ........................................................................................ 44
EPB .......................................................................................................... 45
SAS .......................................................................................................... 46
DPF .......................................................................................................... 46
BMS Reset .............................................................................................. 48
Throttle .................................................................................................... 49
TPMS Reset ............................................................................................ 49
ABS Bleeding ......................................................................................... 50
Injector Coding ....................................................................................... 50
Gearbox Match ....................................................................................... 51
Suspension ............................................................................................. 51
Windows Initialization ............................................................................ 52

iii
Seat Calibration ...................................................................................... 52
Headlight ................................................................................................. 53
7 REPORT .............................................................................. 53
Report ...................................................................................................... 54
Replay ..................................................................................................... 57
File Manager ........................................................................................... 57
8 SETTINGS ........................................................................... 58
Language ................................................................................................ 58
Units ........................................................................................................ 59
My Workshop Info .................................................................................. 60
About ....................................................................................................... 61
9 REMOTE ASSISTANCE ...................................................... 62
SHENZHEN XTOOLTECH INTELLIGENT CO., LTD ................. 64

4
1 GENERAL INTRODUCTION
The X100PAD PLUS Auto Key Programmer is a compact key
programming device powered by XTOOL, based on the Android 5.1
operating system. It supports multi-language switching and is
suitable for different countries and regions. Besides key
programming functions, this device also supports basic diagnosis
functions as well as 20+ special functions, which helps you to work
on vehicle maintenance.

5
X100PAD PLUS TABLET
The main unit of the X100PAD PLUS is the tablet. It allows you to
operate all the key programming and diagnosis functions, and it can
also work as a normal Android tablet.
This tablet comes up with an integrated VCI so when working on
vehicles, please connect the tablet directly to the OBD port of the
car.
FRONT VIEW OF TABLET

6
The front of the tablet is mainly a touchable display screen, you can
use your fingers to operate on the screen to finish most of the key
programming process.
BACK VIEW OF TABLET
① Nameplate: Show the basic information about tablet such as
product name and serial number, etc.
② Loudspeaker: It supports external sound playback.
①
②

7
HOST PORTS
① Micro USB port: Used for data transfer for tablet & PC
communication and also used for charging.
② VGA port: Diagnostic communication port, which can be used
for OBD connection.
③ Power button: Long press to turn device on/off, short press to
turn off the screen.
EEPROM ADAPTER
To read the EEPROM chip on the immobilizer module & dashboard,
X100PAD PLUS also comes up with an EEPROM adapter. In some
situations, you need to unweld the chip from the module to read &
write this chip.
To read & write EEPROM chip, please unweld the chip from the
module and weld (or lock it) onto the corresponding EEPROM board
and plug the board onto the adapter. The adapter could be
connected to the device via main cable. Disconnect the OBD
connecter on the cable, and the connector side of the cable could
be plugged into the adapter.
①
② ③

8
① Status Light: Shows status of the EEPROM adapter. Will turn
red when it’s connected to any power supply.
② Comm Light: Shows communication status of the EEPROM
adapter. The light will flash when communicating to the tablet.
③ 14-Pin Port: Used to connect the EEPROM board onto the
adapter.
④ DB15 Port: Used to connect the adapter to the tablet.
①
②
③
④

9
TECHNICAL SPECIFICATIONS
Table 1-1 Specifications
Item Description
OS Android 5.1
Processor Quad-core processor 1.6GHz
Ram 1G
Rom 32G
Display 7-inch capacitive, 1024×600 resolution
Connectivity
 USB
 Wi-Fi
Sensor Gravity sensor
Audio Input/ Audio
Output
Microphone/ Loudspeaker
Ports
 Micro USB
 VGA port
Battery 4000mAh 3.7V
Input Voltage 5V DC
Operating
Temperature
-10~50℃
Relative Humidity < 90%
Dimensions 208*140*15.5mm

10
2 GETTING STARTED
ACTIVATION GUIDE
When you turn on the system for the first time, the system will
automatically enter the guide process and request the user to select
the system operating language.
After selecting the system language, click Next to enter the Wi-Fi
connection page, as shown below:

11
Select a network to connect to on the Wi-Fi connection page.
After successful network connection, the automatic system will jump
to Factory mode to download the software:

12
Once the software has been downloaded, the tablet will
automatically reboot and request the system language selection
again.
After setting the system language, you will enter the activation page,
as shown in the figure below. You can also click the "Trial" button in
the upper right corner to try it out before activation.

13
Click Start Activate to enter the activation page, as shown below:
A pop-up window showing Activation Success indicates that you
have completed the first boot setup, click OK to enter the diagnostic
system and start using the device.

14
 If you meet problems like “Registration failed”, please check your network or
contact Xtool aftersales services.