Xtralite NiteSafe Maxi User manual

Maxi
Model: XL20704
NiteSafeTM
Instruction Manual
Please read these instructions carefully before connecting
or using the appliance. Keep for future reference.
One Year Limited Warranty
Made in China
For further product information visit
www.xtra-lite.com
Unit 3a Eden Business Park
Dunns Close
Nuneaton
Warwickshire
CV11 4NE
t: 02476 586 845
e: [email protected]
xtralite is a trading name of Trinity Xtras Ltd a Company
registered in England No 4325172

10 LED Torch &
Emergency Flasher
6 LED for Nightlight
& Worklight
4 Mode Button
Auto Sensor for Nightlight
On/Off/Auto Lo/Auto Hi
Charging Base
• Automatically turns on when the power goes out
• Torch simply slides in and out of charging base
• Induction charging technology
• Rechargeable Lithium-ion battery
• Batteries and LEDs never need to be replaced, and LEDs are always cool to the touch
• Modern design
• Lightweight and durable
• Torch with 10 super bright LEDs - 15 Lumens on power failure and 60 Lumens on Hi
• Front light with 6 super bright LEDs - 15 Lumens
• Charge lasts up to 12 hours on Lo and 3 hours on Hi
• Front work light last 5 hours
• Torch 4 position push button hi/lo/flasher/off
• Nightlight 4 position slider - on/off/auto-Lo/auto-Hi
• The 6 LED nightlight automatically turns on when darkness is detected
• 10 LED torch spread: 40m
Maxi
Nightlight Mode:
Keep the handheld light plugged into the charging
base, the 6-LED front light will automatically turn
on at night when the slide switch is set to Auto-Hi
or Auto-Lo mode. When in the ‘ON’ position the
front light will activate permanently (even during
power failure). When set in the ‘OFF’ position the
nightlight will not activate but power failure mode
will still be available.
Power Failure Mode:
Super bright 10-LED light automatically turns on
during power failure. (Except when the slide
switch is set in the ON position).
Torch & Work Light Mode:
10-LED torch on top and 6-LED work light on the
front.
4 mode press button to activate Top 10-LEDs HI /
LO / Flasher / OFF
Set switch to ON to use front Work Light.
Induction charging methods
Rechargeable Li-ion
3.7v/500mAh battery
Do not operate with a damaged charger or if the
appliance has malfunctioned or been damaged in
any manner.
Do not allow children to play with the packaging
materials.
Save these instructions
Important Information
When using electrical appliances, in order to
reduce the risk of fire, electric shock, and/or
injury to persons, basic safety precautions
should always be followed.
For your safety...
Read all instructions carefully, even if you are
familiar with the appliance.
Do not use this appliance/charger if it appears
to be damaged.
Do not look directly into the light source or
point it into the eyes of others. This can lead to
retinal damage.
Charge the light only with the charger provided.
Do not throw the charger into fire and do not
expose it to extreme heat. The charger could
explode or burst.
Do not attempt to alter or manipulate the
charger in any way. Doing this increases the
exposure to danger significantly.
This appliance is not watertight and is
unsuitable for use in damp
environments.
This is not a toy. Close attention is necessary
when used near children.
Do not use with a damaged outlet.
Do not handle charger with wet hands.
Do not immerse the appliance or charger in
water or any other liquid.
Do not attempt to use the charger with any
other product.
Only plug the charger into a standard electrical
outlet. Not to be used with
extension cords.
Features of your NiteSafeTM
MUST BE CHARGED FOR 24 HOURS BEFORE INITIAL USE