Yaber K1 User manual
K1 PROJECTOR
CONTENS
YABER Lifetime Professional Support 2
Tips 2
Package List 3
Projector Specifications 4
Projector Overview 4
Remote Control 7
Installation 8
1. Installation Method 8
2. Install on the Ceiling 9
Starting Projector 10
Image Adjustment 10
1. Installation Method 10
2. Keystone Correction 11
Setting Up The Projector 11
1. Select The Insert Signal Source 11
2. USB Disk Input Mode 12
2.1 Play Video/Music/Photo/Office Suite in the USB Disk Insert Mode 12
2.2 Play Interface 12
2.3 Music Play Interface 14
2.4 Picture Play Interface 15
3. WiFi Setting 16
3.1 iOS Cast (for iOS Devices) 16
3.2 Miracast (for Android Devices) 17
4. Bluetooth Setting 18
5. Projector Image Setting 18
5.1 Projection Mode 18
5.2 Automatic Keystone & 4-Point Keystone 19
5.2.1 Automatic Keystone Correction 19
5.2.2 Horizontal & Vertical Keystone Correction 19
5.3 Digital Zoom 20
6. System Update 20
7. Other Setting 21
8. About 21
Signal Lines Connection 22
1. Connect USB Disk 22
2. Connect the Devices via the HDMI ports 22
3. Connect to the DVD Player 22
4. Connect to the Sound bar/Speaker 23
Safe Shutdown 23
Warranty 23
EN 2 EN 3
YABER Lifetime Professional Support Package List
Tips
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have any issues, email
your order number and the problem to support@yabertech.com We will provide a fast
solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound,
bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We
promise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can been solved.
And give us an opportunity to improve. We guarantee we will provide you a satisfactory
solution.
Thanks for your understanding!
YABER Service Team
1. Do not place projector in too warm or too cold room, because the high temperature or low
temperature will shorten lifespan of the device. The working environment would be 5℃~35℃
better.
2. If there are black spots on the projection screen, please don't worry,please contact
support@yabertech.com via email, we can send you a video about how to remove the dust.
3. The projector shall be strictly protected from strong impact, extrusion and vibration. Do
not try to move and on strong impact, extrusion and vibration. Do not try to move and the
internal circuit faults.
4. Lens, as the core component of the projector, is directly related to the picture definition
and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped
with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.
K1 Projector HDMI Cable 3-in-1 AV Cable
Remote Control Power Cord Cleaning cloth
Lens Cover Quick Start Guide Warranty Card
EN 4 EN 5
Projector Specifications
Projector Overview
Model No. K1
Native Resolution 1920*1080P Keystone Correction Auto/Manual Vertical&
Horizontal
Display Technology LCD Light Source LED
Color Game 55% NTSC Aspect Ratio 4:3/16:9
Recommended
Projection Distance 3.8-21.9ft Minimum Projection
Distance 3.8ft
Power Voltage AC100-240V Projector Weight 8.6lb
Picture File JPG/JPEG/ BMP/PNG Interfaces HDMI*2/USB*2/3.5mm
Headphone jack/AV
Projection Method Front/Rear on Desk, Front/ Rear on Ceiling
Video File MP4/MKV/WMV/3GP/MPG/VOB/TP/TS/DAT/MOV/FLV
Audio File MP3/AAC/WAV/WMA/M4A/AAC/OGG/FLAC
AV USB HDMI 1 HDMI 2 IR
IR Window
Heat-Sink Window Rubber Pads
Bottom Label
Height Adjusting
Screw
Power Cord Port
IR Window
Ethernet Port
Headphone Jack
Air Inlet
USB Ports
HDMI Ports
Speakers
Automatic Focus
Signal Receiver
Projector Lens
Automatic FocusSignal Receiver For Automatic Focus
IR Window Infrared signal receiver
Projector Lens Optical coated glass lens
AV Port Audio input
Headphone Jack 3.5mm Headphone Output
Air Inlet Prevent the projector from overheating
USB Ports USB 1 port / USB 2 port
HDMI Ports HDMI 1 input / HDMI 2 input
Speakers Stereo 15W
Heat-Sink Window Prevent the projector from overheating
Power Cord Port Power Cord Port
Rubber Pads Protective pads/remove to install ceiling
mount
Bottom Label Notice information
Height Adjusting Screw Adjust the height of the projector
Ethernet Port Connect to the Ethernet
RJ45
EN 6 EN 7
Power
Up Key
Power
Homepape
Confirmation key
Back
Focus +
Focus -
Down Key
Source
Arrow keys
Menu
Auto focus/keystone
Volume +
Volume -
Mute
Left Key
Right Key
Menu
Source
Back
OK
Power Turn on/off the power
Menu Enter the menu interface
Source Enter the signal source selection
interface
Back Return to the previous menu
Ok Confirm the option
Up Key
Used to adjust the parameter of the
projector in the menu mode
Down Key
Left Key
Right Key
Remote Control
F+
F-
Power Turn on/off the power
Source Select the input signal source
Arrow keys Used to adjust the parameter of the projector in the menu
mode
Menu Press once: Operate picture and sound settings in AV or HDMI
Mode Press twice in succession: select 16:9/4:3 projection
Auto focus/keystone Adjust focus and keystone
Volume + Volume up
Volume - Volume down
Mute Close the sound
Homepape Enter the home page
Confirmation key Confirm the option/Play or pause the video
Back Enter the home page
F+ Focus +
F - Focus -
EN 8 EN 9
Note:
1. Install 2 pieces of AAA batteries into the remote controller before using it. Do not combine
new batteries with old ones in remote controller, which can cause operation failure due to
insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the
remote controller aims at infrared signal receiver of the projector.
3. If you are not using the remote controller for an extended period, please take out batteries
to prevent batteries leakage.
The projector can be hanged on the ceiling with special hanger frame, and placed on the
stable desk to project the image according to the operating environment and requirements.
In addition, the projector can be installed with following methods:
The recommended projection distance is about 10.9ft,the shortest projection distance is 3.8ft.
The image size depends on the distance between projector and screen, there may be 3%
deviation among above listed data. Different settings cause various distances.
The projector can be hanged on the ceiling with special hanger frame, and placed on the
stable desk to project the image according to the operating environment and requirements.
In addition, the projector can be installed with following methods:
1. Please purchase an universal projector ceiling mount;
2. Remove the four rubber pads on the bottom of the projector, you will see the screw holes
and use the M5*11mm screws for installing the ceiling, and then install it.
Keep the projector at a height where its lens is axial symmetry to the screen. If this is not
possible, use the keystone correction function to adjust the projection image.If you want to
get a free projection screen,please contact us via support@yabertech.com.
Installation
1. Installation Method
2. Install on the Ceiling
1. Front projection Ceiling mount 2. Rear projection Ceiling mount
3. Front projection Desk mount 4. Rear projection Desk mount
Aspect Ratio: 16:9
Distance (ft.) Screen Size
3.8 35"
5.5 50"
7.6 70"
10.9 100"
13.1 120"
16.4 150"
21.9 200"
Screw holes
EN 10 EN 11
Starting Projector
1. Press the power key on the remote controller or projector, the indicator light will turn blue.
2. Use the focus function of the projector to get the best image performance.(If it is still
blurry, please try to adjust the projection distance.)
3. Use the keystone function of the projector to get a rectangle projection screen.
4. Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player, Computer,
etc.) in the corresponding interfaces of the projector, please be sure to select the
corresponding source. If you do not select the correct source, the projector will not be able
to detect the signal.
5. Select the " " menu,enter the [ Other Setting],then you can select the option [ Language
Setting ] to set your preferred language.
Image Adjustment Setting Up The Projector
When using the projector for the first time, it normally displays an unclear image. This is due
to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:
The projector's setting page is as follow.
Select the [SOURCE] and choose HDMI1/HDMI2/AV on the setting page.
When you start the projector,please wait patiently for 2-3 seconds the projector will adjust
focus automatically.if the image is not clear,you can press the focus buttons "F+" , "F-" or auto
focus&keystone key on the remote controller to adjust the focus of the lens, tap or long press
the focus button until the image is clear.
Note: If it is still blurry, please try to adjust the projection distance.
You can use the automatic keystone correction or digital 4D keystone correction of the
projector to change the image to be rectangle(vertical and horizontal). Detail please refer the
page 17 of this manual.
1. Focus Adjustment
1. Select The Insert Signal Source
2. Keystone Correction
EN 12 EN 13
2.1 Play Video/Image/Audio/Office in the USB Insert Mode
2.2 Play Interface
2. USB Disk Input Mode
1. Insert the USB Disk, the [USB] icon will appear.
2. Select the [USB] on the setting page.
3. Select the option [ Video/Image/Audio/Office].
3. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ]
button to play it.
PS:
1. The K1 upgraded projector supports U disk to directly play PPT, Word, Excel files.
2. If you enter from the [Video] menu, you can only play the video, The same as other 3
options.
Menu Function
Select play mode (directory play/single cycle/directory loop)
Switch to the previous video
Fast Backward,rewinds the video back quickly while playing it. The
rewinding speed ranges from 2X to 32X
Play or pause the current video
Fast Forward, pushes the video to move forward quickly while playing it.
The forward speed ranges from 2X to 32X
Switch to the next video
Select all playlists in the current folder
Playing settings
Playing settings Include Function
Video subtitle close,inner,external Set multiple modes of video
subtitles
Breakpoint play close,open
You can set the video continue to
play from the point where it was
stopped
Audio track Audio track You can see the audio information
Display mode 16:9,full,over,auto,4:3 You can set the video aspect ratio
Picture settings Picture Mode, Color Temperature,
Reset to Default You can set the picture information
Sound settings Sound Style, Equalizer Detail, Reset
to Default You can set the sound information
EN 14 EN 15
Menu Content Mode Function
Picture Mode User/Standard/Vivid/
Sport/Movie/Game
Brightness
Modify the picture
parameters in the
range 0-100
Energy Saving
Saturation
Sharpness
Sound Style
User/Standard/Vivid/
Sports/Movie/Music/
News
Balance
Modify the sound
parameters in the
range 0-100
Bass
Treble
2.3 Music Play Interface
2.4 Picture Play Interface
Menu Function
Select play mode (directory play/single cycle/directory loop)
Switch to the previous video
Fast Backward,rewinds the video back quickly while playing it. The
rewinding speed ranges from 2X to 32X
Play or pause the current video
Fast Forward, pushes the video to move forward quickly while playing it.
The forward speed ranges from 2X to 32X
Switch to the next video
Select all playlists in the current folder
Playing settings
Menu Function
Switch to the previous picture
Play or pause the current picture
Switch to the next picture
Zoom in image
Zoom out image
Flip picture 90°to the left
Flip picture 90°to the right
Set the picture information
EN 16 EN 17
Wireless Connection
Warming Tips:
1. The fluency of screen mirroring with wireless connection will be affected by the network
environment. A bandwidth of 100Mbit or more is recommendedwhen using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A
distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compati- bility.
4. Any questions, please feel free to email YABER via support@yabertech.com.
1. Go to "SETTING" page - Select the [SETTINGS] menu - Select the [WiFi Setting] menu -
Open the WiFi function - Select your home WiFi from the list - Connect the K1 projector to
your home WiFi.
1. Go to “APPS” page - Select "My Apps" row - Find [iOS Cast] App - Press the OK button to
enter the [iOS Cast] menu.
3. On your Android device, tap [ Settings ] -[ WLAN Display ] -Turn [ Wi-Fi ] ON, Connect your
home WiFi.
Note:
1. Different brands of Android phones have different operations for select Screen Mirroring
Display, please refer to your phone’s manual. [ Multiscreen/Wireless display/WLAN display/
Screen mirroring/Wireless projection/Smart view etc. ]
2. Not all Android phones support this function. Please make sure it is supported before use.
2. Select the [ Settings ] menu on your Android device -- Select the [ Screen mirroring ]
function -- Select your Miracast receiver named [K1-AnCast-XXXX ]-- your Android device
screen will be displayed on the projection screen after 3 seconds.
2. Go to “APPS” page - Select "My Apps" row - Find [iOS Cast] App - Press the OK button to
enter the [iOS Cast] menu.
3. Select the [ Settings ] menu on your iOS device -- Turn on the [ Wi-Fi ] function -- Connect
your iOS device to the same home network as the projector.
4. Open the [ Control Center ] on your iOS device -- Select the [ Screen Mirroring ] function --
Select and connect the iOS Cast receiver named [K1-xxxx ] -- your iOS device screen will be
displayed on the projection screen after 3 seconds.
3.1 iOS Cast (for iOS Devices)
3.2 Miracast (for Android Devices)
3. WiFi Setting
Settings
SETTINGS
USB
SOURCE
OPTIONS
Wireless Projection
Available devices
K1-Cast-XXXX
HELPC ANCEL
Wireless Projection
Available devices
Connected
K1-Cast-XXXX
CANCELD ISCONNECT
EN 18 EN 19
1. Go to "SETTING" page - Select the [SETTINGS] menu - Select the [Bluetooth] option --
Open the Bluetooth function and your Bluetooth device -- Scan the Bluetooth devices
nearby automatically -- Choose the Bluetooth device desired -- it will be paired and
connected automatically.
Note:
1. The K1 projector is compatible with the Bluetooth headsets, Bluetooth speakers and
Airpods, but not the Bluetooth keyboards or Bluetooth phones.
When you start the projector,please wait patiently for 2-3 seconds the projector will adjust
keystone automatically.if the image is not rectangle,you can Use the digital 4D keystone
correction to change the image to be rectangle.
When the projection screen is not rectangular, it can be adjusted by 4-point keystone
correction.
Step 1: Go to "SETTING" page - Select the [SETTINGS] menu - Select the [Projection Mode]
option.
Step 2: Press the arrow keys on the remote controller or projector to adjust the horizontal or
vertical parameters, until the projection screen becomes the desired rectangle.
4. Bluetooth Setting
5. Projector Image Setting
Settings
5.1 Projection Mode
5.2 Automatic Keystone & 4-Point Keystone
5.2.1 Automatic Keystone Correction
5.2.2 Horizontal & Vertical Keystone Correction
1. Front projection Ceiling mount 2. Rear projection Ceiling mount
3. Front projection Desk mount 4. Rear projection Desk mount
OK Pick point : press the OK button on the remote controller or projector to enter the
adjustment interface.
Adjustment : Press the arrow keys on the remote controller or projector to adjust the
horizontal or vertical parameters.
SETTINGS
USB
SOURCE
OPTIONS
EN 20 EN 21
Back : Press the key on the remote controller to back to previous page.
Reset : Press the key on the remote controller to restore the original parameters.
5.3 Digital Zoom
Step 1: Select the [ Digital Zoom ] option and press the OK button on the remote controller or
projector to enter the submenu.
Step 2: By pressing the button on the remote controller or projector, you can reduce the
height and width of projection size up to 50%.
About the Direct/Standby Power On Option
Direct Mode: When the projector is powered on, the projector will be automatically turned
on.
Standby Mode: When the projector is powered on, you need to press the button on the
remote controller or projector to turn on the projector.
6. System Update
7. Other Setting
8. About
Menu Function
Online Update Online update
Local Update Local update
Restore Factory Restore user operation application configuration
and system setting
Menu Content
System Version V1.0.0.4:2022-XX-XX
MAC Address e0:27:6c:46:b3:51
Menu Function
Boot Source Option Off/HDMI1/HDMI2/AV
Power On Option Direct/Standby
Language Setting Set up the language
Scheduled Shutdown Off/10min/20min/30min/60min/120min
EN 22 EN 23
Signal Lines Connection
YABER K1 projector has 7 interfaces, HDMI ports*2/ USB ports*2/ 3.5mm headphone output/
AV in /RJ45 (Ethernet port) .Please select the correct connecting port to connect your device
(PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)
1. Insert the U disk into either of the two usb input ports.
2. You can directly enter the start-up screen on the home page, select the option [ Video/
Music/Photo/Office Suite].
3. Select the desired file (or enter the subfolder) in the USB disk, then press the [ OK ] button
to play it.
1. Connect your TV stick or laptop to any HDMI port of the projector.
2. Enter the home page to select the corresponding HDMI1 or HDMI2 as the signal source.
Or connect to the DVD Player with the HDMI cable in the package.
Use the 3-in -1 AV cable in the package
1. Connect your TV stick or laptop to any HDMI port of the projector.
2. Connect the colorful female connectors to your DVD player's RCA cable with the 3-in-1 AV
cable in the package.
3. Connect the black connector to the AV port of the projector, enter the home page to
select [ AV ] as the signal source.
If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and
your speaker as the picture shows, enter the home page to select [ AV ] as the signal source.
1. Press the button on the projector or remote controller,then press OK key to power off
the projector.
2. Unplug the power cord of the projector.
3. Cover the lens and store the projector in a cool and dry place.
Thank you so much for your purchase and support! We provide 3-year warranty for K1
projector. If you have any questions, please feel free to contact us via:
1. Connect USB Disk
2. Connect the Devices via the HDMI ports
3. Connect to the DVD Player
4. Connect to the Sound bar/Speaker
Audio
out
AUX
port
Safe Shutdown
Warranty
Video
Left
AV port Right
DVD
AV USB HDMI 1 HDMI2 IR
AV USB HDMI 1 HDMI 2I
AV USB HDMI 1 HDMI 2I
AV USB HDMI 1 HDMI 2I
RJ45
RJ45 IR
RJ45
RJ45
IR
IR
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment
and receiver.Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Declaration of Conformity
We (EU based importer is responsible for this declaration)
Prolinx GmbH
(Company name)
Brehmstr.56, 40239 Duesseldorf, Germany
(Company address)
declare under our sole responsibility that the product
Trade name: Yaber
Equipment: Entertainment Projector
Model No. : K1
to which this declaration relates is in conformity with the essential requirement set out in the
Council Directive on the Approximation of the laws of the Member States relating to RED
Directive(2014/53/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the
following standards were applied:
EN 62368-1:2014+A11:2017
EN IEC 62311:2020
ETSI EN 301 489-1 V2.2.3(2019-11)
ETSI EN 301 489-17 V3.2.4(2020-09)
ETSI EN 301 489-3 V2.1.1(2019-03)
EN 55032:2015+A11:2020
EN 55035:2017 +A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
ETSI EN 300 328 V2.2.2(2019-07)
ETSI EN 301 893 V2.1.1(2017-05)
ETSI EN 300 440 V2.2.1(2018-07)
IEC62321-3-1:2013
IEC62321-4:2013
IEC62321-5:2013
IEC62321-6:2015
IEC62321-7-1:2015
IEC62321-7-2:2017
IEC62321-8:2017
Full Name: George.wang Position: Approbation Manager
Signature: Place/Date: Shenzhen,China/Mar.22-2022
Scan and download the PDF user manual
Where to Get More Help
Support@yabertech.com aftersales@yabertch.com www.yaberglobal.com
@Yaber Entertainment Projector @Yaber Entertainment Projector
Table of contents
Other Yaber Projector manuals
