Yaber Pro U9 User manual

V.22.4.25

CONTENTS
YABER LIFETIME PROFESSIONAL SUPPORT 02
TIPS 02
PACKAGE LIST 03
PROJECTOR SPECIFICATIONS 03
PROJECTOR OVERVIEW 04
REMOTE CONTROL 06
INSTALLATION o7
1. Installation Method o7
2. Install on the Ceiling 08
STARTING PROJECTOR 09
IMAGE ADJUSTMENT 09
1. Focus Adjustment 09
2. Image adjustment 0
3. Select the Signal Source 0
SETTING UP THE PROJECTOR 0
1. Select The Input Signal Source. 10
2. USB Disk Input Mode 1
2.1 Play VideolMusiciPicture/Office in the US Disk Input Mode 11
22 Video Interface 1
2.3 Music Play Interface. 12
24 Offce Play Intrface 12
3. WiFi Setting 3
31108 Cast(or (0S Devices) 13
32 Miracast(for Android Devices) 4
4. Blueteeth Setting 15
5. Image Setting 16
6. Keystone Setting 7
6.1 4-comer Keystone 17
62 4-side Keystone 18
63 Reset 18
7. Projector Position 19
8. Custom zoom 20
9. System update 20
10. Factory Reset 20
11. Language 20
SIGNAL LINES CONNECTION 21
1. Connect USB Disk 21
2. Connect the Devices via the HDMI ports 21
3. Connect to the DVD Player 21
4. Connect 1o the Soundbar/Speaker 22
SAFE SHUTDOWN 22
WARRANTY 23
TROUBLESHOOTING 2
01

= [email protected]
YABER LIFETIME PROFESSIONAL SUPPORT
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have
any issues, email your order number and the problem to
[email protected] . We will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal,
no sound, blueteeth connection failed, WiFi connection failed, dark spots,
choppy animation etc. We promise all the projectors have been 100%
carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem
can been solved. And give us an opportunity to improve. We guarantee we
will provide you a satisfactory solution.
Thanks for your understanding!
YABER Service Team
TIPS:
1.Do not place projector in too warm or too cold room, because the high
temperature or low temperature will shorten lifespan of the device. The
working environment would be 5°C~35°C better.
2.f there are black spots on the projection screen, please don't worry,
please contact [email protected] via email, we can send you a
video about how to remove the dust.
3.The ventilation is equipped for the projector to work stably. Don't cover the
vent with cloth, blanket or other things. Don't insert anything into the slit of
the projector, or it may produce a short circuit or an electric shock to your
device and cause damage.
4.The projector shall be strictly protected from strong impact, extrusion and
vibration. Do not try to move and on strong impact, extrusion and vibration.
Do not try to move and the interal circuit faults.
5.Lens, as the core component of the projector, is directly related to the
picture definition and effect. The excessive dust thereon will affect image
quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens
surface. Hard cloth or abrasives shall not be used.
02

= [email protected]
PACKAGE LIST
'YABER Pro U9 Projector*1 Remote Control*1 Power Cord*1
HDMI Cable*1 3-in-1 AV Cable Lens Cover*1
Cleaning Cloth*1 User Manual*1 Cleaning Kit*1
Projector Screen*1
PROJECTOR SPECIFICATIONS
Model No. Pro U9
Naive ion | 1920°1080P Keystone | Manual vertcatorizontal
Display B
gy | LCD Light Source | LED
Color Gamut | 16.7M Full Aspect Ratio | 4:3/16:9
Recommended Minimum
Projection 8.8-14ft Projection 201t
Distance Distance
Power Projector
otage Acto0-240v | (ol 3,86l
- JPG/JPEG/ HDMI*2/USB*2/3.5mm
Picture File | BMp/PNG Interfaces Headphone jack/AV
Frojection | FrontiRear on Desk, Front/ Rear on Ceiling
Video File | 3GPIMP4/MPG/MKV
Audio File | MP3/APE/AAC/FLAC/OGG/MID/MA4A
03

= [email protected] @
PROJECTOR OVERVIEW
04

[email protected]
1 [Foot pad Increase the height of the projector
2 |Projector lens Optical coated glass lens.
3/11 | IR Window Infrared signal receiver
4 |Speakers Speakers stereo 5w
5 |USB Ports U1 input / U2 input
6/7_| HOMI Ports HDMI 1 input / HDMI 2 input
8 | Power Cord Port Power Cord Port
9 |AVPort AV Signal Input
10 | Headphone Jack 3.5mm Headphone Output
12 |Vents Prevent the projector from overheating
13 | Focus Ring Adjust the focus ring to get the clearest image
14| Keystone Ring Adjust the keystone ring to get a rectangle shape
15 | Detachable Dust Use the attached screwdriver to remove the switch,|
Cover Switch then take detachable dust cover out upwards
16 | Detachable Dust Cover | Clean the dust (if the screen has a black spot)
17 | Botiom label Nameplate on the bottom of the projector
18| Rubber Pads Protective padsiremove to install ceiling mount
(1]
o
A
=
@
-Poverkey
2. Menu
« x » @ OOKKey
e 4. Arrow Key
s v - @ oS
6.74 6. Back
Tips: Pro U9 fuselage buttons are touch-screen buttons, which can be operated with a
light touch.
1 Power Turn on/off the power
2 | MenuKey Operate in AV or HDMI mode
3 | ok Confirm the option
4 Arrow Keys is;a «; g:(j:s« the parameter of the projector in the.
5 | Source Select the input signal soucre
6 | Back Return to the previous menu
05

= [email protected]
REMOTE CONTROL
AN
1] ® | 7um oot ine power
& | Make system setings
3| | Can moke somo basic adusiments o th sreen e cicing uring
the video playback
= | Operate in AV or HDMI mode
4| Volume down
»i | Play or pause the video in USB mode
Select the input signal soucre.
4
5
6
7 | N | ciosethe souna
8
9
Used to adjust the parameter of the projector in the menu mode.
Ul
@]«
10 Back to the main menu
il Retum to the previous menu
12| 4+ | Volumeup
06

[email protected]
Note:
1).Install 2 pieces of AAA batteries into the remote controller before using it.
Do not combine new batteries with old ones in remote controller, which can
cause operation failure due to insufficient power supply.
2)When using the remote controller, please make sure that the signal
transmitter of the remote controller aims at infrared signal receiver of the
projector.
3).If you are not using the remote controller for an extended period, please
take out batteries to prevent batteries leakage.
INSTALLATION
1. Installation Method
The projector can be hanged on the ceiling with special hanger frame, and
placed on the stable desk to project the image according to the operating
environment and requirements. In addition, the projector can be installed with
following methods:
Al Adj
1.Front projection Ceiling mount | 2.Rear projection Ceiling mount
e i 7y
3.Front projection Table mount 4.Rear projection Table mount
Keep the projector at a height where its lens is axial symmetry to the screen.
If this is not possible, use the keystone correction function to adjust the
projection image.
If you want to get a free projection screen,please contact us via
[email protected]
07

[email protected]
Aspect Ratio: 16:9
Distance (ft.) Screen Size
4.00 37
5.50 52"
7.80 78"
10.80 108"
13.00 132"
16.40 166"
The recommended projection distance is about 10.8ft the shortest projection
distance is 4.0t
The image size depends on the distance between projector and screen,
there may be 3% deviation among above listed data. Different settings cause
various distances.
2. Install on the Ceiling
Screw holes
APlease purchase an universal projector ceiling mount;
B.Remove the four rubber pads on the bottom of the projector, you will see
the screw holes and use the M4*10mm screws for installing the ceiling, and
then install it
08

aftersales@ yabertech.com
STARTING PROJECTOR
1)Press the power key on the remote or projector, the indicator light will tum
blue;
2)Adjust the focus ring of the projector to get the best image performance;
(Ifitis still blurry, please try to adjust the projection distance.)
3)Use the 4D keystone function of the projector to get a rectangle projection
screen;
4)Connect the external device (Smart phone, iPad, Fire TV stick, TV box,
DVD player, Computer, etc.) in the corresponding interfaces of the projector,
please be sure to select the corresponding source. If you do not select the
correct source, the projector will not be able to detect the signal;.
5)Select the " menuenter the [Setting] then you can select the option
[ Language Setting ] to set your preferred language.
PS: Enter the [Setting] menu- then you can select the option [Language] to
set the preferred language.
IMAGE ADJUSTMENT
When using the projector for the first time, it normally displays an unclear
image. This is due to the lens being out of focus or the incorrect trapezoid
setting.
Please follow the below steps to correct:
1. Focus Adjustment
Focus Ring
Keystone Ring
[ ]
09