Yaber Pico T1 User manual

Pico T 1 PROJECTOR EN
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

YABER Lifetime Professional Support
Tips
Package List
Projector Specifications
Projector Overview
Remote Contol
Installation
Starting Projector
Image Adjustment
1. Focus Adjustment
2. Digital 4D Keystone Correction
Setting Up The Projector
1. Select The Insert Signal Source
2. WiFi Setting
2.1 iOS Cast (for iOS Devices)
2.2 Screencast for Android Devices
2.3 Eshare Wireless Connection
3. Bluetooth Setting
4. Projector Image Setting
4.1 Projection Mode
4.2 Automatic Keystone & 4-Point Keystone
4.2.1 Automatic Horizontal Keystone Correction
4.2.2 Manual Vertical Keystone Correction
5. Date and Time
1
1
2
3
3
5
6
7
7
7
8
8
8
8
9
10
11
11
12
12
13
13
13
14
CONTENTS
6. Language Settings
7. Wallpaper Settings
SIGNAL LINES CONNECTION
1. Connect the Devices via the HDMI Ports
2. Connect the Type-C
Safe Shutdown
Warranty
TROUBLESHOOTING
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

14
14
15
15
15
15
15
16
YABER Lifetime Professional Support
Tips
Package List
Projector Specifications
Projector Overview
Remote Contol
Installation
Starting Projector
Image Adjustment
1. Focus Adjustment
2. Digital 4D Keystone Correction
Setting Up The Projector
1. Select The Insert Signal Source
2. WiFi Setting
2.1 iOS Cast (for iOS Devices)
2.2 Screencast for Android Devices
2.3 Eshare Wireless Connection
3. Bluetooth Setting
4. Projector Image Setting
4.1 Projection Mode
4.2 Automatic Keystone & 4-Point Keystone
4.2.1 Automatic Horizontal Keystone Correction
4.2.2 Manual Vertical Keystone Correction
5. Date and Time
6. Language Settings
7. Wallpaper Settings
SIGNAL LINES CONNECTION
1. Connect the Devices via the HDMI Ports
2. Connect the Type-C
Safe Shutdown
Warranty
TROUBLESHOOTING
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Tips
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have any issues, email
your order number and the problem to [e-mail] We will provide a fast solu-
tion in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, blue-
tooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We prom-
ise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can been solved.
And give us an opportunity to improve. We guarantee we will provide you a satisfactory solu-
tion.
Thanks for your understanding!
YABER Service Team
YABER Lifetime Professional Support
1. Do not place projector in too warm or too cold room, because the high temperature or low
temperature will shorten lifespan of the device. The working environment would be 5℃~35℃
better.
2. If there are black spots on the projection screen, please don't worry,please contact Sup-
[e-mail] via email, we can send you a video about how to remove the dust.
3. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not
try to move and on strong impact, extrusion and vibration. Do not try to move and the internal
circuit faults.
4. Lens, as the core component of the projector, is directly related to the picture definition and
effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with
soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Package List
Yaber Pico T 1 Remote Control
(with button cell)
Type-C ChargerHDMI-HDMI
(mini) Cable
Quick Start Guide
USB Type-C
Cable
Organizer
Double-ended
Type-C Cable
Power Bank Magnetic Tripod
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Projector Specifications
Projector Overview
Model No. Ace K1
Native Resolution
Display Technology
Recommended
Projection Distance
Power Voltage
Picture File
Interfaces
Projection Method
Video File
Audio File
960*540P
DLP
1-6.6ft
DC 9V/2A 12V/1.5A
JPG/BMP/PNG
Keystone Correction
Light Source
Aspect Ratio
Minimum Projection
Distance
Projector Weight
Manual Vertical & Auto
Horizontal
LED
16:9
1ft
0.33lb
USB C*1, Hdmi Mini*1, USB A*1
Front/Rear on Desk
H.264/H.265/MPEG1/MPEG2/MPEG4/MVC/VP6/VP8/VP9
AAC_LC/HE_AAC/HE_AACV2/ LPCM/MP3/APE
Touch Panel
HDMI
IR Lens
Type-C
Volume Power Focus
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Touch Panel
Volume Panel
Power Key
Focus Ring
HDMI Port
Type-C Port
IR Window
Projector lens
Operation panel
To adjust volume
Turn on/off the power
Adjust the focus ring to get the clearest image
Connect your devices
Connect your devices
Infrared signal receiver
Optical coated glass lens
Menu
Homepage
OK
Return
Setting
Enter the menu interface
Enter the home page
Enter the signal source selection interface
Return to the previous menu
Confirm the option
Return
OK
Menu
Home
Settings
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Remote Contol
Power
Reture
Navigation
OK
Vol -
Vol +
Turn on/off the power
Return to the previous menu
Used to adjust the parameter of the projector in the menu mode
Confirm the option
Volume up
Volume down
Note:
1. When using the remote controller, please make sure that the signal transmitter of the
remote controller aims at infrared signal receiver of the projector.
2. If you are not using the remote controller for an extended period, please take out batteries to
prevent batteries leakage.
Return
OK
Navigation
Vol - Vol +
Power
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Installation
The projector can be placed on the stable desk to project the image according to the oper-
ating environment and requirements.Keep the projector at a height where its lens is axial
symmetry to the screen.If this is not possible, use the keystone correction function to adjust
the projection image.
The recommended projection distance is about 8.7ft,the shortest projection distance is 3.1ft.
The image size depends on the distance between projector and screen, there may be 3%
deviation among above listed data. Different settings cause various distances.
Keep the projector at a height where its lens is axial symmetry to the screen. If this is not pos-
sible, use the keystone correction function to adjust the projection image.If you want to get a
free projection screen,please contact us via [email protected].
Aspect Ratio: 16:9
Distance (ft.)
3.1
4.4
6.1
8.7
10.5
13.1
17.5
Screen Size
35"
50"
70"
100"
120"
150"
200"
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

1. Connect the power bank and Yaber Pico T1 with a Type C cable-press the power button of
the power bank-press the power button of the projector.Or Connect the Charger and Yaber
Pico T1 with a Type C cable-Plug the Charger into a power socket-Press the power button of
the projector.
2. Use the focus function of the projector to get the best image performance.(If it is still blurry,
please try to adjust the projection distance.)
3. Use the keystone function of the projector to get a rectangle projection screen.
4. Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player, Computer, etc.)
in the corresponding interfaces of the projector, please be sure to select the corresponding
source. If you do not select the correct source, the projector will not be able to detect the
signal.
5. Select the " " menu,enter the [ Other Setting ],then you can select the option [ Language
Setting ] to set your preferred language.
Starting Projector
Image Adjustment
1. Focus Adjustment
When using the projector for the first time, it normally displays an unclear image. This is due
to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:
Focus
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

2. Digital 4D Keystone Correction
Rotate the focus ring or lens slowly. At the same time, check the focus point carefully. The
best focus point for the lens would be where the image most clear.
Note: If it is still blurry, please try to adjust the projection distance.
Use the digital 4D keystone correction of the projector to change the image to be rectangle
(vertical and horizontal). Detail please refer the page 13 of this manual.
Setting Up The Projector
1. Select The Insert Signal Source
The projector's home page is as follow.
Select the desired insert signal source (HDMI/File) on the home-page.
2. WiFi Setting
Wireless Connection
Warming Tips:
1. The fluency of screen mirroring with wireless connection will be affected by the network
environment. A bandwidth of 100Mbit or more is recommended
when using screen mirroring.
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

2. Make sure your mobile device is close to the projector when using wireless connection. A
distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compati- bility.
4. Any questions, please feel free to email YABER via [e-mail].
1. Turn on Yaber Pico T1.
2. Connect the Yaber Pico T1 to iOS devices with a USB cable(Type-C connector on one end
and Lightning connector on the other After connecting iOS devices please click"Trust" in the
trust pop-up window of iOS devices if iOS devices have a password, please enter it.
3. Start screen casting.
2.1 iOS Cast (for iOS Devices)
2.1.1 Wired Connection for iOS
1. Please make sure your iOS devices and Yaber Pico T1 are connected with the same WiFi.
2. Down slide iOS devices screen from top click Screen Mirroring then choose device in the
list to share screen with iOS devices.
2.1.2 Wireless Connection for iOS
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

1. Turn on Yaber Pico T1.
2. Connect the Yaber Pico T1 to Android devices with a Double-ended Type-c cable.
3. Start screen casting.
4. Go to Google Play to download Eshare App and install it.
5. Start screen casting.
2.2 Screencast for Android Devices
2.2.1 Wired Connection for Android
Go to home page -- Select the [ ScreenCast ] menu -- Press the OK button to enter the
screencast interface--Select the [ Android Wireless] function -- Select your Miracast receiv-
er named [ Android 8821]-- your Android device screen will be displayed on the projection
screen after 3 seconds.
2.2.2 Wireless Connection for Android
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Note:
1. Different brands of Android phones have different operations for select screen mirroring
display, please refer to your phone’s manual. [ Multiscreen/Wireless display/WLAN
display/Screen mirroring/Wireless projection/Smart view etc. ]
2. Not all Android phones support this function. Please make sure it is support- ed before use.
2.3 Eshare Wireless Connection
1. Please make sure your device and Yaber Pico T1 are connected with the same WiFi.
2. Go to Google Play or https:/h.eshareapp to download Eshare App and install it.
3. Run Eshare App, search for the device you can see the device number click the number to
enter the connection list click"Start Mirror", you can share the phone screen to the projection
device.
Go to home page -- Select the [ ] menu -- Select the [ Bluetooth ] Option -- Open the
Bluetooth function and your Bluetooth device -- Scan the Bluetooth devices nearby auto-
matically -- Choose the Bluetooth device desired -- it will be paired and connected auto-
matically.
3. Bluetooth Setting
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Note:
1. The Pico T1 projector is compatible with the Bluetooth headsets, Bluetooth speakers and
Airpods, but not the Bluetooth keyboards or Bluetooth phones.
2. If you have any question, please feel free to email YABER via: [e-mail].
You can choose four projection modes, the device supports standard view,standard ceiling
view,rear projection view rear projection ceiling view.
Note:
The default mode is standard view, if you want to switch to other modes, you need to turn
off auto keystone correction settings first.
4. Projector Image Setting
4.1 Projection Mode
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

4.2.1 Automatic Horizontal Keystone Correction
When you start the projector, the projector will adjust horizontal keystone automatically. If
the image is not rectangle, you can use the digital 4D keystone correction to change the
image to be rectangle.
4.2.2 Manual Vertical Keystone Correction
When the projection screen is not rectangular, it can be adjusted by 4-point keystone cor-
rection.
Step 1: select the [ Settings ] menu-select [ Projection ] menu- turn off [ Auto keystone cor-
rection settings ]-select [ Manual keystone correction ] menu.
Step 2: Press the arrow keys on the remote controller or projector to adjust the horizontal or
vertical parameters, until the projection screen becomes the desired rectangle.
4.2 Automatic Keystone & 4-Point Keystone
OK Pick point : press the OK button on the remote controller or projector to enter the adjust-
ment interface.
Adjustment : Press the arrow keys on the remote controller or projector to adjust the
horizontal or vertical parameters.
Back : Press the key on the remote controller to back to previous page.
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Select the [ Settings ] menu-select [ Date and Time ] menu. Then you can adjust date and
time according to your requirement.
5. Date and Time
Select the [ Settings ] menu-select [ Language ] menu.then you can adjust date and time
according to your requirement.
The projector built-in smart application,select the [ Home ] menu-select [ App store ] menu,
you can download your favorite application.
6. Language Settings
SMART APPLICATION
Menu
Home
Favorite
Apps
Movie
Music
Function
App store menu
Add your favorite apps
List of downloaded apps
Movie Recommendation List
Music Recommendation List
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

1. Press the button on the projector or remote controller,then press OK key to power off the
projector.
2. Unplug the power cord of the projector.
3. Store the projector in a cool and dry place.
Thank you so much for your purchase and support! We provide 3-year warranty for Pico T1
projector. If you have any questions, please feel free to contact us via
[e-mail].
Safe Shutdown
Warranty
SIGNAL LINES CONNECTION
YABER Pico T1 projector has 3 interfaces, HDMI(mini)/ USB C/ USB A. Please select the cor-
rect connecting port to connect your device (PC, Phone, DVD Player, PS4 etc.)
DVD
1) Connect your TV stick or laptop to HDMI port of the projector.
2) Enter the home page to select the corresponding HDMI as the signal source.
1. Connect the Devices via the HDMI Ports
Type-C cable mirroring supports mainstream devices. Type-C supports PD3.QC2.0 backward
compatibility, charger 9V2A/12V1.5A.
2. Connect the Type-C
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

TROUBLESHOOTING
Problems listed below might occur during the operation of your projector. Please refer to
the possible factors which might cause the issue to do troubleshooting.
1. When turning on the power switch, the indicator light does not work.
1) The power might not be connected well.
2) Check the over-heat protection system.
2. The remote controller does not communicate with the projector.
1) The power switch at the back of the projector is turned on or off?
2) The remote controller's batteries are depleted?
3) Something obstructing the signal between the remote and IR
4) Strong light on IR directly.
3. No image on the screen.
1) Is the channel set-up correct?
2) Is there an input signal ?
3) Is the input cable plugged well ?
4) Under PC mode, is the refresh rate > 75KHz ?
4. Blue screen,no picture,no sound.
Input cables connected right?
5. Picture right, no sound.
1) Input cables connected right?
2) Volume at min or on Mute.
6. Can't play the movies.
1) The format of the video is right?
2) Files are broken?
3) Device is broken?
7. There is picture, no sound?
The decode system doesn't match.
8. Can't find devices when connected with hard drive or flash drive.
Check if the device is broken.
9. Auto-off after working for a while.
1) The projector ventilation is blocked.
2) The over-heat protection system.
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16

Scan and download the PDF user manual
Where to Get More Help
[e-mail]
@Yaber Entertainment Projector
@Yaber Entertainment Projector
www.yaberglobal.com
01 02
03 04 05 06 07
08 09 10 11 12
13 14 15 16