Yaber V2 User manual
V2 Projector
Language
EN
FR
DE
IT
ES
JP
01-24
25-46
47-68
69-91
92-113
114-137
....................................................................................
......................................................................................
........................................................................................
........................................................................................
........................................................................................
.........................................................................................
CONTENTS
YABER Lifetime Professional Support ......................................................
TIPS ............................................................................................................
PRODUCT PACKING LIST .......................................................................
PRODUCT DESCRIPTION .......................................................................
PROJECTOR SPECIFICATION ................................................................
REMOTE CONTROL .................................................................................
IMPORTANT SAFEGUGARDS ................................................................
INSTALL ATION ..........................................................................................
Adjust the Tiilt Base and Hang celiling .....................................................
SUPPLY ......................................................................................................
CLEANING .................................................................................................
FAQ .............................................................................................................
STARTING PROJECTOR .........................................................................
KEYSTONE AND FOCUS .........................................................................
SETTING UP THE PROJECTOR .............................................................
1.Setting the main menu ........................................................................
2.Select the input source .......................................................................
3.Wireless Projection Method ................................................................
3.1.For iOS Devices ..................................................................
3.2.For Android Devices .....................................................................
4.Wired Connection ..................................................................
PROJECTOR CONNECTIONS ................................................................
1. Connecting to the Computer .............................................................
2. Connecting to the DVD player ...........................................................
3. Connecting to the soundbar ..............................................................
PROJECTOR IMAGE SETTING ..............................................................
1.Picture Menu .......................................................................................
2.Sound Menu ........................................................................................
3.Time Menu ...........................................................................................
4.Option Menu ........................................................................................
PROJECTION DISTANCE AND SIZE ......................................................
01
01
01
02
03
04
05
05
05
06
06
07
08
09
10
10
10
11
12
15
19
20
20
21
21
22
22
23
23
23
24
EN
01
YABER Lifetime Professional Support
Product Packing List
Dear Customer,
Woohoo! Your projector is already in your hands! Let's get started!
Do you have any questions on how it works? Please read this manual
thoroughly before using the projector. Are you satisfied with your projec-
tor? If you have any issues, email your order number and description of
your issue to: Support@yabertech.com. Send your email ASAP, as
we want to fix your issues the first time you have them.
Customers sometimes can experience some confusion when using the
projector. Rather than trying to communicate directly with us, many buyers
instead just leave a review on the product page. However, most negative
reviews are caused by non-standardized use rather than a defect in the
product itself. Actually, many problems can be easily solved by setting,
such as no signal, no sound etc. We promise all the projectors have been
carefully checked and packaged before shipping.
Therefore, if you have any questions, please contact us and give us an
opportunity to improve. We guarantee that we will provide you more
satisfactory solution.
Thanks for your understanding!
Best regards,
YABER TEAM
●V2 Projector * 1 ●Power Cord * 1 ●Instruction Manual * 1
●3-in-1 AV Cable * 1 ●HDMI Cable * 1 ●Lens Cleaning * 1
●Support Base*1 ●Remote Control * 1 (Batteries not included)
Some video tutorials please refer to YABER's YouTube channel:
https://www.youtube.com/channel/UCcU4wy4vPRQa_uNcolDd2hA
EN
02
Product Description
01.Focus Ring
02.Keystone Ring
03.Power
04.OK
05.Source
06.Left Move
07.Right Move
08.Return
09.Earphone Port
10.AV Port
11.U SB -T
12.USB
13.HDMI
14.VGA
15.Power Cable Port
03 05
04
08
06 07
02
01
10 11 13
12
09
15
14
01
02
03
04
05
06
07
08
09
10
Name
Focus Ring
Keystone Correction
Power
OK
Source
Left Move
Right Move
Return
Earphone Port
AV Port
Description
Adjust the focus ring to get the clearest image.
Adjust the keystone ring to get a rectangle shape.
This button can lead the projector to working/
standby mode.
Confirm
Choose Source (Screen Mirror,PC-RGB,HDMI,
USB, AV,etc.)
Left Move
Right Move
Back
Earphone port
Audio input
EN
03
Projector Specification
Pictures shown are for illustration purpose only.Actual product may vary
due to product enhancement.
INative Resolution
Display Technology
Light Source
Display Colors
Aspect Ratio
Projector Weight
Picture File
Video File
Port
1280*720p
LCD
LED
16.7M Full Color
4:3/16:9/auto
2.2lb
bmp./jpg/png/gif
Recommended
Projection Distance
Minimum Projection
Distance
Keystone Correction
Power Voltage
Projection Method
Focus
Audio File
7-10 ft
3 ft
±15°Manual
AC 100-240V
Front/ Rear /Ceiling
Manual Operation
AAC/MP2/MP3/PC-
M/FLAC/WMA/AC3
11
12
13
14
15
USB-T
USB
HDMI
VGA
Power Cable Port
Wired screen mirroring port (With Original USB cable)
USB port
HDMI input
VGA input
Plug the power cable
AVI/ MP4/ MKV/ FLV/ MOV/ RMVB/ 3GP/ MPEG1/
MPEG2/ XVID (WMV NOT Suported)
AV, USB, USB-T, HDMI, VGA
EN
04
Thank you very much for purchasing the YABER V2 projector.
Please read this instruction manual carefully before use. Also, please
keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact Support@yabertech.com.
We can provide after-sales service until satisfaction.
Remote control
Thanks
Replace the remote control battery
1. Push to open the battery cover.
2. Remove both old batteries and install new ones (AA). Make sure that
the polarity of the batteries (+/-) is correctly aligned.
(Batteries not included)
IR Transmitter
Power
Input Source Menu
OK
Move Left Move Right Move Up Move Down
Return
Volume Down Volume Up
Mute
EN
Please Attention:
The Mirror display function doesn't support protected videos due to
copyright protection. (Netflix, Amazon Prime Video and Hulu etc.)
Important safeguards
These safety instructions are to ensure the long life of the projector and
to prevent fires and shocks. Read them carefully and pay attention to all
warnings.
Installation
1. For best results, use the projector in a dark room.
2. Place the projector on a flat, level surface in a dry area away from dust
and moisture.
4. Exposure to direct sunlight, smoke or steam may damage internal
components.
5. Handle the projector carefully. Falling or shaking can damage internal
components.
6. Do not place heavy objects on top of the projector.
Adjust the Tilt Base and Hang Ceiling
Adjust the tilt base:
Install the screws (included in the package) to place ①, lift the front edge of the
projector to the desired height, turn the presser foot and release the button to
lock the tilt base to the appropriate position.
Hang ceiling:
Please purchase the projector stand and M5 screw additionally.
Install the projector stand to place ①, and hang the projector on the ceiling.
( Note: You can install the Tripod Stand to the place ① )
①
05
EN
06
1. The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC
adapter. Ensure that the power supply meets this requirement before
attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A
damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord
from the outlet.
Supply
1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a
mild detergent. Never use strong detergents or solvents such as alcohol
or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to
scratch or damage the lens.
Cleaning
EN
FAQ
1. At the time of switching on, the indicative light does not work
①. The power supply may not be well connected
②. Check the overheating protection system
2. Pressing the power button on the remote control does not turn on the
projector
①. The remote control batteries are empty
②. The signal between the remote control and the IR sensor is obstructed
③. Strong direct light on the IR sensor?
3. No image on the screen
①. Is the channel setting correct?
②. Is there an input signal?
③. Is the input cable inserted correctly or is it in the wrong position?
④. In PC mode the refresh rate is> 75KHz?
4. The image works but there is no sound
①. Are the input cables connected correctly?
②. Volume at minimum or silent
③. Check that the audio format of the video is in the supported list
07
5. Turns off automatically after being turned on for a while
①. Is there a barrier around the fan?
②. Small or large voltage fluctuations
③. Check the overheating protection system
6. I can not find devices connected with hard drives or flash drives
①. Re-insert the device
②. Check if the device is working
7. Unable to play video
①. Is the video format correct?
②. The file is corrupted?
③. The device is damaged
STARTING PROJECTOR
Turn on the projector
1.Install two AAA batteries in the remote control before using.
2.Press the Power key on the remote or panel, the indicator light will turn red.
3.Remove the lens cover of the projector, the lamp will start working 2 seconds
later, when an image is projected on the screen the machine is working
smoothly. If the first projection screen is not the start up screen, press the "S"
button on the remote and select USB source.
4.Adjust the keystone ring to get a rectangle shape.
5.Adjust the focus ring or rotate the lens of the projector to get the best image
performance. (If it is still blurry, please try to adjust the projection distance.)
6.If you connect other devices, be sure to select the corresponding source. If
you do not select the correct source, the projector will not be able to detect the
signal.
7.Press the Menu button on the remote control to enter the OSD Language to
set your preferred language;
EN
08
Turn off the projector
1.Press the Power button when the projector is in use, this will cause it to
switch to standby mode.
2.When the projector switch into standby mode, the light will blink red.
Keystone and Focus
If the projected image is in a trapezoidal shape, it can be resolved by
Keystone correction. ( Do Manual Keystone Correction )
Note: If the Keystone correction fail to resolve image shape, please
reduce the vertical height of the projector in relation to the center of the
screen.
The projected image may be blurry or difficult to see, this is due to lack of
Focus adjustment with the lens, please follow the processes below to
adjust the Focus. ( Do Manual Focus, find the most sharpness picture on
the screen )
Note: It is normal when sharpness in the central, blur in the edge.
Manual Focus
Keystone Correction
EN
09
The projector's normal start up screen is as follows. If the first projection
screen is not this one, press the “ ” button on the remote control to
select USB source.
Setting the Main Menu:
When the "No Signal" prompt appears, you need to select the input
source:
1. Press the “ ” button on the remote control to select the desired signal,
then press the OK button on the remote control.
2. Once the signal is detected, the selected source information will be
displayed on the screen after a few seconds.
Select the Input Source
ENENEN
10
Menu Setting Method
1.Press the “ ” on the remote, then the menu picture will display on
screen.
Or you need to select the “ ” key on the projector to enter the 4 menus
without the remote control
2.Press“
◀/▶
”key, the menu will move to “PICTURE”>“SOUND”
>“TIME”>“OPTION”.
3.Select the adjust interface,use“▲/▼” key to choose the wanted item.
4.Press“OK” or “
◀/▶
”to adjust the item parameter.
Press the [OK] button on the remote
control and connect with WIFI.
Connect with IOS phone via screen mirroring
1.Click WIFI and find [RKcast-xxxxxxxx] from your
phone.Then enter password[12345678] on your phone.
2.Click Airplay/Screen mirroring on your phone and connect
[RKcast-xxxxxxxx].
Connect with Android Phone：
1.Connect WIFI on your phone.
2.Click Airplay on your phone
Connect by Cables:
1.Connect phone with USB port by phone USB cables.
2.Click "trust"when connect with phone.
Connect with IOS phone via WIFI
1.Press OK to enter the WIFI selection interface from the
projector.Choose your home WIFI and enter the password
by remote control.
2.Connect same WIFI from your phone.
3.Click Airplay/Screen mirroring on your phone and connect
[RKcast-xxxxxxxx].
PIN IP DEVICE
OR
Plug&Play
The fluency of screen mirroring with wireless connection will be affected
by the network environment. A bandwidth of 100Mbit or more is recom-
mended when using screen mirroring.
Make sure your mobile device is close to the projector when using
wireless connection. A distance within 1 meter is recommended.
Some mobile devices may not support screen mirroring due to the
compatibility.
Any questions, please feel free to contact YABER via
Support@yabertech.com
Warming Tips:
！
1
2
3
4
11
EN
Press the OK button to enter the WIFI list - Select your home WIFI from the
list - Connect the V2 projector to your home WIFI
Method 1: Home Network Connection Mode
Step 1
Press the [OK] button on the remote
control and connect with WIFI.
Connect with IOS phone via screen mirroring
1.Click WIFI and find [RKcast-xxxxxxxx] from your
phone.Then enter password[12345678] on your phone.
2.Click Airplay/Screen mirroring on your phone and connect
[RKcast-xxxxxxxx].
Connect with Android Phone：
1.Connect WIFI on your phone.
2.Click Airplay on your phone
Connect by Cables:
1.Connect phone with USB port by phone USB cables.
2.Click "trust"when connect with phone.
Connect with IOS phone via WIFI
1.Press OK to enter the WIFI selection interface from the
projector.Choose your home WIFI and enter the password
by remote control.
2.Connect same WIFI from your phone.
3.Click Airplay/Screen mirroring on your phone and connect
[RKcast-xxxxxxxx].
PIN IP DEVICE
OR
Plug&Play
EN
Connected
WIFI
Search
ChinaNet-Rr
ChinaNet-TT
ChinaNet-clo
ChinaNet-kk
ChinaNet-aaa
ChinaNet-bbb
12
Wireless Projection Method
1. For iOS Users
Select the [Settings] menu on your IOS device - Turn on the [WIFI] function -
Connect your IOS device to the same home network as the projector.
Step 2
“My home”
“My home”
EN
Open Control Center- Tap the Screen Mirroring button-Connect
[RKcast-xxxxxx]
① Open control center.
② Tap on Screen Mirroring-Select the Device name [RKcast-xxxxxx]
Step 3
13
Method 2: Cellular Network Connection Mode(From your
mobile phone card)
EN
On your iOS device, tap [Settings] -[Wi-Fi] -Turn [Wi-Fi] ON. Available
networks are shown.
Choose the WiFi name like [RKcast-xxxxxx], Connect it and enter the
password [12345678] which is on the Projector’s menu.
Step 1
Open Control Center- Tap the Screen Mirroring button-Connect
[RKcast-xxxxxx]
① Open control center.
② Tap on Screen Mirroring-Select the Device name [RKcast-xxxxxx]
Step 2
Note: After connecting, if "No Internet Connection" is displayed, please
ignore it because it will not affect the use.
RKcast-C7AEF9
14
EN
Method 1: Home Network Connection Mode
15
Other manuals for V2
1
Table of contents
Other Yaber Projector manuals
