Yale ENTR S User manual

The smarter way to protect your home.
Smart Lock
Quick Guide
Video
ENTR S

Find manual for extended functions at:
www.yale.se/entrs
www.yale.no/entrs
www.yale.dk/entrs
Video
ENTR S
Find instructions video at:
Read this carefully before using ENTR S
This product is designed and manufactured for safe usage.
Improper use can cause loss of property, personal injury or
product malfunction.
Service must be done only by trained personnel. This could be
necessary for example when the product is damaged or
needs hardware upgrade. The software upgrades can be done in
most of the cases with help of the Yale App. Kindly make sure you
always update to the latest software when received a notification.
Disassembly or installation with other systems other than
described in the product manuals is not allowed.
Brands, brand name, design, copyright, patent and other
proprietary right on or within this product and manuals is the
property of the manufacturer and shall not be used without
written approval.
Read these instructions carefully, aswell as our Terms and our
Privacy Policy and make sure that you understand them, before
you start using the Device(s). Changes to the manuals can be done
without prior notice.
The full text of the EU declaration of conformity is and our Terms
and Conditions and Privacy Policy can be found at our website at
the following Internet address: www.yale.se, www.yale.dk,
www.yale.no
Hereby, ASSA AB declares that the radio equipment type
Bluetooth Electronic Lock is in compliance with the Directive
RED (Radio Equipment Directive) 2014/53/EU and EMC
2014/30/EU.
02

03
In the box
Warning: Do not attempt to operate the unit
until assembled on the door.
Download Application
iOS Android
App
ENTR S
Manual: www.yale.se/entrs
www.yale.no/entrs
www.yale.dk/entrs

04
Uninstall existing lock
OUTSIDE
of the door
1
3
4
2
INSIDE
of the door
5
SE
DK

05
Uninstall existing lock
2
3
1
INSIDE
of the door NO
NO
SE
NO
DK
Choose
long or short
IMPORTANT!
Make sure both are
pointing down before
installation.
Inside Outside
4

06
Install ENTR S
1
3
4
Adjust length of existing part.
If necessary replace
with supplied part.
2
If flush
continue to next page
If not flush
follow instruction
Hold firm against door
and check lock action
min 3 mm
max 8 mm

07
Install ENTR S
UP!
13
2
5
4

08
Check lock action
2
3
1
Test
function
1
Clean surface area before
applying magnet
2
Adding magnet

MASTER RESET
Hold sides
and press R
SOFT RESET
“only” press R
to RESTART
09
Insert batteries - Power ON
MASTER RESET only if needed
1
2
1
2
IMPORTANT!
Download the app before inserting the batteries.
The SETUP of the lock HAS TO BE STARTED
WITHIN 5 minutes of inserting the batteries.
This is for security reasons. If 5 minutes would
be exceeded, a MASTER RESET OR A SOFT RESET
is required before the SETUP of the lock can be
initiated again.
3
NOTE! The MASTER RESET deletes all the credentials

Close the door.
IMPORTANT!
Make sure you are
inside your apartment.
name
e-mail
telephone No.
10
App setup
Follow setup instructions
in App
REST DOOR AGAINST
LATCH DURING SETUP
“Do not shut the door”

11
Lock operations
Unlock and lock
SWIPE DOWN
TO UNLOCK
SWIPE UP
TO LOCK
LOCKED
“lock name”
Update
UNLOCKED
“lock name”
Update
ALWAYS
UPDATE
WHEN
AVAILABLE
Update

owner
owner
ownerowner
12
Fob remote setup
Follow setup instructions in App
NOTE!
Only administrator can add accessories.
Open App
! Remote can not operate lock at the same time as App on Smartphone !
Click several times
continuously,
until connected.
To UNLOCK To LOCK

13
Fingerprint reader/Keypad battery insertion and wall mounting
1
1
3
3
2
2
Insert batteries before starting
pairing setup.
! Do not mount to the wall until pairing setup is complete. !
IMPORTANT !
Keep your door open whilst installing and
configuring accessories.

“Owner”
“Owner”
14
Keypad setup - pairing
Tap keys
to turn ON
Hold # for 5 sec.
to connect
first time.
Unlock door
Tap keys
to light up
Mastercode setup
for your Keypad
Click
77 #
to start
pairing After succesful pairring
you will hear a beep. Next page
1
3
5
4
2
Start by opening the app to ensure
that the setup procedure does not timeout!

15
Keypad Master code setup
Tap keys
to turn ON
Click
11 #
to start
setup
1
3
2
Input a Master code 4 to 10 digits, then press #
4
5
6
Repeat Master code , then press #
Your Master code can now be used to unlock the ENTR S
-- UNLOCKING is done by using the Master code (4-10 digits)
then press #
-- LOCKING is done by pressing 1 #
-- User codes can be created and shared.
They can Unlock but have no access to setup functions.
Creating User code.
-- Up to 20 USER CODES can be created and shared.
1.Wake up the product by touching the keypad
2.Press # MASTER CODE #
3.Press 11#
4.Enter New PIN/CODE (4-10 digits) --> #
5.Repeat New PIN --> #
6.2 beeps = success!
! Keypad can not operate lock at the same time as App on Smartphone !
xTo RESET MASTER CODE:
-- Click MASTER CODE # then 99 # then MASTER CODE #
Kepad is now RESET and can be paired to any ENTR S
For complete, detailed manuals please visit: www.yale.se/entrs
www.yale.no/entrs
www.yale.dk/entrs

16
Fingerprint reader setup - pairing
“Owner”
“Owner”
Tap keys
to turn ON
Hold # for 5 sec.
to connect
first time.
Unlock door
Tap keys
to light up
Input Time
and Date After succesful pairring
you will hear a beep.
1
3
5
4
2
Mastercode and
fingerprint setup
for your Keypad
Next page
Start by opening the app to ensure
that the setup procedure does not timeout!

17
Fingerprint reader - Fingerprint and Master code setup
Tap keys
to turn ON
Click
11 > #
to start
setup
1
3
2
Enter a MASTERNAME and after that a
MASTER CODE 4 to 10 digits, then press #
4
5
x
Repeat Master code , then press #
Follow on screen guide for setting up fingerprints.
Finger 1
- Swipe several times in
different angles until
the unit beeps twice.
Finger 2
- Swipe several times in
different angles until
the unit beeps twice.
Your Master code can now be used to unlock the ENTR S
You can add USER CODES and new users via the menu.
-Wake up the unit
-Enter * Master code #
-Choose "USERS --> ADD USERS --> Follow the instructions
-- UNLOCKING is done by using the USER CODE or
MASTER CODE (4-10 digits then press # ) or by FINGERPRINT
-- LOCKING is done by pressing 1 #
-- Up to 20 USER CODES/FINGERPRINTS can be created
and shared. They can Unlock but have no access to setup
functions.
To RESET MASTER CODE:
-- Click MASTER CODE # then 99 # then MASTER CODE #
Kepad is now RESET and can be paired to any ENTR S
For complete, detailed manuals please visit: www.yale.se/entrs
www.yale.no/entrs
www.yale.dk/entrs
! Keypad can not operate lock at the same time as App on Smartphone !

18
Notes

Limited Warranty
If your ENTR S ("Product") ceases to function as a result of
material or manufacturing defects on the product, the product
is subject to product warranty - provided you have purchased
the product within the last 24 months. There can be local
extensions of the warranty period depending on the type of
the defect and the country of purchase.
In case of defect product, contact always in first hand the
place of purchase to file a complaint. We recommend to do
this with in 2 months from the date you have detected the
fault.
The terms of warranty that apply to your product are:
• That the product is properly installed and maintained, in
accordance with Yale Installation Instructions that
you received at the time of purchase.
• That the product has not been modified in any way.
• Warranty does not apply to mechanical failure caused by
wear, tear or negligence.
• The warranty does not apply to surface treatment of your
Yale product.
The product warranty covers the product and is replaced after
a valid complaint of a replacement product or new product.
Yale (ASSA AB, Trioving AS, RUKO) AS can not be held liable
for any other losses caused by the failure of your product -
whether such losses are direct or indirect consequential
damages.
This warranty applies only when installed in domestic homes
in Sweden, Denmark, Norway or Iceland and can not be
transferred.
Kindly see you local web-pages for warranty details:
www.yale.se/entrs, www.yale.no, www.yale.dk
19

THE YALE BRAND, with its unparalleled global reach and
range of products, reassures more people in more countries
than any other consumer locking solution.
THE ASSA ABLOY GROUP is the world´s leading
manufacturer and supplier of locking solutions, dedicated to
satisfying end-user needs for security, safety and convenience.
PACKAGING FR
Extended functions manual
Video
Yale_ENTR_S_v10
www.yale.se
www.yale.dk
www.yale.no
Support
www.yale.se/entrs
www.yale.no/entrs
www.yale.dk/entrs