Yamaha 5B4-K830V-V0 User manual

INSTALLATION INSTRUCTIONS
Soft Sun Top Cover Kit
5B4-K830V-V0
5B4-K830V-U0
Rhino (all)
DEALER:
These instructions contain important information for future reference and must be given to the customer.
WARRANTY INFORMATION:
•Genuine Yamaha components are covered by a one year limited warranty against defects in material or work-
manship. Labor for replacement of defective components is not covered. See your Yamaha dealer for a copy of
the warranty statement.
•The Limited Warranty provided with new Yamaha vehicles has exclusions for certain failures, including those
caused by competition or racing use (except YZ and WR motorcycle models) as well as by abnormal strain or
abuse. While installation of these components will not “void” your vehicle’s warranty, specific failures adjudged
by Yamaha to have resulted from the installation of accessory components or other modifications, or from
competition use (except YZ and WR motorcycle models), may not be covered by warranty or Yamaha Extended
Service.
PARTS LIST:
This kit contains the following components. Before beginning installation, confirm there are no missing or damaged
components.
Item Part Number Description Qty
-- 5B4-K830V-XX Soft Sun Top Cover Kit --
c * Sun Top Cover 1
d * Straps W/Loops 2
e * Aluminum Tube W/Eye Ends 1
* Part supplied with kit only and not available separately.
Please read and understand these instructions completely before installation to avoid possible injury to
yourself or damage to the accessory or vehicle.
e
d
c
1/2009 20080452 1 of 3 5B4-K832V-V0_A

REAR
STRAP
c
Fig. 1
PREPARATION:
1. Place Rhino on a secure and level surface.
2. Clean all mounting surfaces before beginning
installation.
INSTALLATION:
1. Drape sun top cover cover the frame tubes.
2. Secure the rear straps to the frame tubes as
shown in Figure 1.
3. Wrap the front straps daround the lower frame
tubes (Fig. 2).
4. Feed one end of the straps through the loops at
the opposite end and cinch it tight around the
tube (Fig. 2).
5. Feed the loose end of the front straps d
through the buckles as shown in Figure 3.
FRAME
TUBE
d
Fig. 2
d
STRAP
THROUGH
BUCKLE
c
Fig. 3
1/2009 20080452 2 of 3 5B4-K832V-V0_A

c
e
Fig. 4 6. Insert the aluminum tube ethrough the mate-
rial pocket and place the ends between the ver-
tical frame and the top (Fig. 4).
7. Tighten all straps evenly to secure the cover c
in place.
CARE AND CLEANING:
Wash using a mixture of mild soap and water. Hang
to dry. Do not machine wash or dry.
CUSTOMER SERVICE:
For further information, see your Yamaha dealer.
ESTIMATED TIME TO INSTALL: 0.2 HRS
1/2009 20080452 3 of 3 5B4-K832V-V0_A