BEX4CONTROLSYSTEM
BATTERY COMPARTMENT
3-BAND EQUALIZER
MASTER VOLUME CONTROL
PIEZO PICKUP ON BRIDGE
MAGNETIC PICKUP
BALANCE CONTROL FOR
MAGNETIC PICKUP / PIEZO PICKUP
OUTPUT JACK
qPress the catch on the battery holder
in the direction indicated by the arrow
in the illustration in order to unlock it.
wRemove the old battery from the bat-
tery case, and insert the new battery
making sure that the (+) and (–) ter-
minals of the battery.
Use only a DC9V, 6F22 (S-006P) or
equivalent battery.
ePress firmly so that the battery case
locks into place.
Catch
DC9V
6F22
(S-006P)
BAT. (Battery Check) Indicator
This indicator will light when the battery
needs to be replaced.
Please replace the battery as soon as
possible when the BAT. indicator lights
(see battery replacement below).
EQUALIZER Controls
LOW : Boosts or cuts the level of the
low frequencies.
MID : Boosts or cuts the level of the
middle frequencies.
HIGH : Boosts or cuts the level of the
high frequencies.
■3-Band Equalizer
■Battery Replacement
MAGNETIC PICKUP
PIEZO PICKUP
QC54910
99.Nov.
Printed in Taiwan
