Yamaha DVD-S2500 User manual

Partner: Yamaha
Model: DVD-S2500
Device Type: DVD Player
GENERAL INFORMATION
SIMPLWINDOWS NAME: Yamaha DVD-S2500
CATEGORY: Transport Decks
VERSION: 1.0
SUMMARY: This module will control the Yamaha DVD-S2500.
GENERAL NOTES: This module will control most of the DVD-S2500’s “runtime” functions. When
any command is sent to the receiver, this module will acknowledge that the
command was processed and the corresponding feedback will be reflected at
the outputs of this module.
NOTE: This module depends on feedback from the device. You cannot
comment out the FROM_DEVICE$ serial input. This serial signal must be used
for proper module operation. Some functions of this module will not operate in
certain modes. Please review manufacturer’s manual for more details.
CRESTRON HARDWARE REQUIRED: CNXCOM-2, ST-COM, C2-COM
SETUP OF CRESTRON HARDWARE: RS232
Baud: 9600
Parity: N
Data Bits: 8
Stop Bits: 1
H/W Hand Shaking: RTS/CTS
VENDOR FIRMWARE: N/A
VENDOR SETUP: NONE
CABLE DIAGRAM: CNSP-532

Partner: Yamaha
Model: DVD-S2500
Device Type: DVD Player
CONTROL:
Power_* D Pulse to change receiver’s current power state
Tray_Open/Close D Pulse to open/close transport tray
Play D Pulse to select play
Pause D Pulse to select pause
Stop D Pulse to select play pause (Play_FB will flash). Pulse again to stop
Skip_>> D Pulse to select skip chapter forward
Skip_<< D Pulse to select skip chapter reverse
Key_* D Pulse number inputs to select direct track entry
Program D Pulse to enable programming mode
Random D Pulse to enable random mode
Repeat_Mode D Pulse to enable repeat mode
Repeat_AB D Pulse once to select A point then press again for B point for repeat mode
Dimmer D Pulse to adjust front panel brightness in SACD
Subtitle D Pulse to select subtitle
Audio D Pulse to select the audio mode
Angle D Pulse to select the angle
Top_Menu D Pulse to select top menu
Menu D Pulse to select menu
Cursor_* D Pulse selected button for menu navigation control
Return D Press to display previous screen
Enter D Press to execute current menu function

Partner: Yamaha
Model: DVD-S2500
Device Type: DVD Player
Play_Mode D Pulse to toggle various play modes
Marker D Pulse to show current location information
Video D Pulse to enable/disable video output during DVD Audio playback
Multi/2Channel D Pulse to toggle audio modes in SACD
Poll_Enable D
When high, device is polled every 15 seconds for power status. When
unit is powered on, device is polled every one second for transport
status. Put a 1 on this signal name for high.
From_Device$ S Serial data signal coming from a 2-way RS232 port.
FEEDBACK:
Power_* D True feedback indicating player’s current power state
Play_FB D True feedback indicating player’s current transport status is play
Pause_FB D True feedback indicating player’s current transport status is pause
Stop_FB D True feedback indicating player’s current transport status is stop
To_Device$ S Serial data signal to be sent to a 2-way RS232 port.
TESTING:
OPS USED FOR TESTING: PRO2: Cntrl Eng [v3.177 (Release)]
CNSMX-Pro: 5.14.02x
COMPILER USED FOR TESTING: 2.06.20
SAMPLE PROGRAM: Yamaha DVD-S2500 Demo
REVISION HISTORY: V. 1.0