Yamaha Disklavier E3 User manual

Starting
Listening
English

SELECT
SELECT
Learning about the Control Unit
Buttons that you will use for playback and recording.
Turns on or shuts down the Disklavier.
ON/OFF
Starts and pauses
playback/recording.
PLAY/PAUSE
The Disklavier can play songs on
commercial audio CDs and data CDs
(such as PianoSoft•PlusAudio, etc)
Compact Disc
The Disklavier comes with a total of 128
megabytes of internal ash memory
that allows you to store song data.
Internal Flash Memory
Executes the selection.
ENTER (center)
Selects the item.
CURSOR
You can also use commercially available
USB ash memory to store song data.
USB Flash Memory
Opens the media selection screen.
SELECT
Gets the Disklavier ready to record.
RECORD
Stops playback/recording.
STOP
Opens the CD tray.
EJECT
Learn More? See page 2 on Operation Manual.
Learn More? See page 14 on Operation Manual.
Learning about Media
Media that you can use on the Disklavier.

Connect the Disklavier to mains.
Selects the item.
Turning Your Disklavier On
1
Turn your Disklavier on.
Your Disklavier is now ready for use!
2
>> >>
[ON/OFF]
[ON/OFF]
Shut your Disklavier down.
When You Finish …
Learn More? To put the Disklavier into the standby mode >> See page 14 on Operation Manual.

CD tray ontheMedia Center
To change the playback tempo >> See page 27 on Operation Manual.
To play in a different key (transposition) >> See page 27 on Operation Manual.
To repeat playback >> See page 28 on Operation Manual.
To use the timer >> See page 35 on Operation Manual.
Load a CD.
Listening to a CD included with the Disklavier
1
Select “CD” as the playback source.
2
Select an album.
3
Select a song.
4
Start song playback.
5
Stop song playback.
6
>>
>>
>>
[EJECT]
[SELECT]
>>
[CURSOR] [ENTER]
[ENTER]
>>
[CURSOR]
[CURSOR]
[PLAY]
[STOP]
Learn More?

Modem
(with router function)
Control unit
(left side)
Other device
(such as computer)
LAN cable
Control unit
(left side)
LAN cable
Modem
(without router function)
Other device
(such as computer)
Router
Before operating…
Connect the Disklavier to a router or a modem equipped
with a router that is connected to the Internet.
For more details on connections, see page 94 on Operation Manual.
>>
[SELECT]
[SELECT]
>>
[CURSOR] [ENTER]
[CURSOR]
[ENTER]
To use a subscriber-only DisklavierRadio channel >> See page 93 on Operation Manual.
To mute the DisklavierRadio >> See page 26 on Operation Manual.
Select “D-Radio” as the playback source.
Listening to a Free DisklavierRadio Channel
1
Select a free channel.
2
Turn the DisklavierRadio on!
3
Turn the DisklavierRadio o...
4
Note: The free channel is “CH-01”.
Learn More?

P. O. Box 1, Hamamatsu, 430-8650 Japan
Printed in Japan
Copyright © 2013 Yamaha Corporation This document is printed on chlorine free (ECF) paper.
Recording
X9758D0
English
N
Jun-13

>>
[SELECT] [ENTER]
[PLAY]
>>
[RECORD]
Select “Memory” as the destination.
Recording to Internal Memory
1
Start recording.
2
[STOP]
Start playing your song.
3
Stop recording.
4
Flashes Lights Lights Lights

[PLAY]
To record along with the metronome >> See page 48 on Operation Manual.
To record L and R parts separately >> See page 50 on Operation Manual.
To record L and R parts with the split point set >> See page 52 on Operation Manual.
To change the recording tempo >> See page 55 on Operation Manual.
To manage albums >> See page 62 on Operation Manual.
Listen to your performance right now?
Learn More?

SELECT
>>
[SELECT]
>>
[CURSOR] [ENTER]
[PLAY]
>>
[RECORD]
[STOP]
Insert a USB ash memory.
Recording to a USB Flash Memory
1
Select “USB1” as the destination.
2
Start recording.
3
Start playing your song.
4
Stop recording.
5
Flashes Lights Lights Lights

[PLAY]
Listen to your performance right now?
To record along with the metronome >> See page 48 on Operation Manual.
To record L and R parts separately >> See page 50 on Operation Manual.
To record L and R parts with the split point set >> See page 52 on Operation Manual.
To change the recording tempo >> See page 55 on Operation Manual.
To manage albums >> See page 62 on Operation Manual.
Learn More?