Yamaha RX-V100D User manual

SERVICE MANUAL
100986
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■CONTENTS
TO SERVICE PERSONNEL .......................................... 2
FRONT PANEL .............................................................. 3
REAR PANELS .............................................................. 3
REMOTE CONTROL PANEL ........................................ 4
SPECIFICATIONS...................................................... 5~6
ADVANCED SETUP ...................................................... 7
INTERNAL VIEW ........................................................... 7
DISASSEMBLY PROCEDURES ............................. 8~11
SELF DIAGNOSIS FUNCTION (DIAG) ................. 12~30
AMP ADJUSTMENT .................................................... 31
IC DATA ................................................................. 32~35
BLOCK DIAGRAM ................................................. 36~37
DISPLAY DATA ........................................................... 38
PRINTED CIRCUIT BOARD .................................. 39~51
PIN CONNECTION DIAGRAM .................................... 52
SCHEMATIC DIAGRAM ........................................ 53~60
PARTS LIST ........................................................... 61~73
REMOTE CONTROL.................................................... 74
P.O.Box 1, Hamamatsu, Japan
RX-V100D
AV RECEIVER
RX-V100D
2005 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
'05.11

RX-V100D
2
RX-V100D
WALL
OUTLET
EQUIPMENT
UNDER TEST
AC LEAKAGE
TESTER OR
EQUIVALENT
INSULATING
TABLE
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and
possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
■TO SERVICE PERSONNEL
1. Critical Components Information
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
●Meter impedance should be equivalent to 1500 ohms
shunted by 0.15µF.
●Leakage current must not exceed 0.5mA.
●Be sure to test for leakage with the AC plug in both polarities.
The P.C.B.s installed in this unit are soldered using the following solder.
About Lead Free Solder
Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair
work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
1. As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead solder, be sure
to use a soldering iron suitable to each solder.
2. If lead solder must be used, be sure to remove lead free solder from each terminal section of the parts to be replaced and from the area
around it completely before soldering, or make sure that the lead free solder and lead solder melt together fully.
SIDE A SIDE B
DSP P.C.B. Lead Solder Lead Free Solder
FUNCTION P.C.B. – Lead Free Solder
OPERATION P.C.B. – Lead Free Solder
MAIN P.C.B. – Lead Free Solder
POWER P.C.B. – Lead Free Solder
SUBTRANS P.C.B. – Lead Free Solder
DAB P.C.B. – Lead Free Solder
Side A
Side B
SMT REFLOW Process
MI FLOW Process
Solder Dip

RX-V100D
3
RX-V100D
■FRONT PANEL
B model
■REAR PANELS
G model
B model

RX-V100D
4
RX-V100D
■REMOTE CONTROL PANEL
RAV306

5
RX-V100D
■SPECIFICATIONS
■Audio Section
Minimum RMS Output Power (Power Amp. Section) (0.06 % THD, 8 ohms)
FRONT L/R ............................................................................. 85 W + 85 W
CENTER .................................................................................. 85 W
SURROUND L/R ......................................................... 85 W + 85 W
SURROUND BACK ................................................................. 85 W
DIN Standard Output Power Per Channel (0.7 % THD, 4 ohms)
MAIN L/R ................................................................. 130 W + 130 W
CENTER ................................................................................ 130 W
SURROUND L/R .................................................... 130 W + 130 W
SURROUND BACK ............................................................... 130 W
IEC Power (0.06 % THD, 8 ohms)
..................................................................................... 95 W + 95 W
Dynamic Power Per Channel (IHF)
FRONT L/R (8 ohms/6 ohms/4 ohms/2 ohms) ...... 115/150/185/230 W
Damping Factor
FRONT L/R (20 Hz to 20 kHz, SPEAKER-A) .............. 120 or more
Input Sensitivity / Input Impedance
CD, etc. ............................................................ 200 mV / 47 k-ohms
MULTI CH INPUT
FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER
.................................................................... 200 mV / 47 k-ohms
Maximum Input Signal (1 kHz, 0.5 % THD)
CD, etc. (EFFECT ON) ............................................... 2.2 V or more
Output Level / Output Impedance
REC OUT ........................................................ 200 mV / 1.2 k-ohms
SUBWOOFER (2ch Stereo & FRONT SP: SMALL)
........................................................................... 4.0 V / 1.2 K-ohms
Headphone Jack Rated Output / Impedance
CD, etc. (1 kHz, 50 mV, 8 ohms) ..................... 150 mV / 100 ohms
Frequency Response
CD, etc. FRONT L/R (10 Hz to 100 kHz) ...................... +0 / -3.0 dB
Total Harmonic Distortion(40 W, 8ohms)
CD, etc. (2ch Stereo) FRONT L/R SP OUT .............. 0.06 % or less
Signal to Noise Ratio (IHF-A network)
Input shorted SP OUT
200 mV .................................................................... 98 dB or more
CD, etc. Input shorted SP OUT
250 mV .................................................................. 100 dB or more
Residual Noise (IHF-A network)
FRONT L/R SP OUT ................................................ 150 µV or less
Channel Separation (Input 5.1 k-ohms shorted, 1 kHz/10 kHz)
CD, etc. ........................................... 60 dB or more / 45 dB or more
Tone Control Characteristics
Bass
Boost/Cut ................................................................. ±10 dB 60 Hz
Treble
Boost/Cut ............................................................... ±10 dB 20 kHz
Filter Characteristics
FRONT, CENTER, SURROUND, SURROUND BACK SMALL
H.P.F. ......... fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB oct.
SUBWOOFER
L.P.F. ......... fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB oct.
■Video Section
Video Signal Type
................................................................................................... PAL
Composite Video Signal Level
.............................................................................. 1 Vp-p / 75 ohms
S-Video Signal Level
Y ............................................................................ 1 Vp-p / 75 ohms
C ..................................................................... 0.286 Vp-p / 75 ohms
Component Video Signal Level
Y ............................................................................ 1 Vp-p / 75 ohms
Cb/Cr .................................................................. 0.7 Vp-p / 75 ohms
Video Maximum Input Level
.............................................................................. 1.5 Vp-p or more
Video Signal to Noise Ratio
................................................................................... 50 dB or more
Monitor Out Frequency Response
Composite Video Signal ............................... 5 Hz to 10 MHz, -3 dB
S-Video Signal .............................................. 5 Hz to 10 MHz, -3 dB
Component Video Signal .............................. 5 Hz to 60 MHz, -3 dB
■FM Tuner Section
Tuning Range
........................................................................ 87.50 to 108.00 MHz
50 dB Quieting Sensitivity (IHF)
Mono ..................................................................... 2.0 µV (17.3 dBf)
Stereo ..................................................................... 25 µV (39.2 dBf)
Usable Sensitivity (IHF)
Mono ..................................................................... 1.0 µV (11.2 dBf)
Selectivity
at 400 kHz ............................................................................... 70 dB
Signal to Noise Ratio (IHF)
Mono ....................................................................................... 76 dB
Stereo ...................................................................................... 70 dB
Harmonic Distortion (1 kHz)
Mono ........................................................................................ 0.2 %
Stereo .......................................................................................0.3 %
Stereo Separation (1 kHz)
................................................................................................ 42 dB
Frequency Response (20 Hz to 15 kHz)
....................................................................................... +0.5 / -2 dB
Antenna Input
........................................................................ 75 ohms unbalanced
■AM Tuner Section
Tuning Range
............................................................................... 531 to 1611 kHz
Usable Sensitivity
.......................................................................................... 300 µV/m
Antenna
................................................................................... Loop Antenna
■DAB Section
Tuning Range
Band 3 ..................................................................... 174 to 240 MHz
L-Band................................................................. 1452 to 1492 MHz
Sensitivity
Band 3 ................................................................................. -99 dBm
L-Band................................................................................. -95 dBm
Selectivity (for adjacement channel)
Band 3 ..................................................................................... 40 dB
L-Band..................................................................................... 40 dB
Signal to Noise Ratio
................................................................................................ 97 dB
Harmonic Distortion
............................................................................................ 0.005 %
Stereo Separation (1 kHz)
................................................................................................ 95 dB
Frequency Response (20 Hz to 20 kHz)
.................................................................................... +0.5 / -0.5 dB
Antenna Input
........................................................................ 50 ohms unbalanced
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol are
trademarks of Dolby Laboratories.
"SILENT CINEMA" is a trademark of YAMAHA CORPORATION.
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of
Digital Theater Systems, Inc.
The “DAB Digital Radio” logo and the stylised “r” mark ® and ©
Digital One Limited.
171 (6-3/4")
150 (5-15/16")
21
(13/16")
380.3 (15")
18
(11/16")
22
(7/8")
420.3 (16-9/16")
435 (17-1/8")
Unit : mm (inch)
• DIMENSIONS
■General
Power Supply
...............................................................................AC 230 V, 50 Hz
Power Consumption
............................................................................................... 360 W
Standby Power Consumption (reference data)
................................................................................................ 0.1 W
Maximum Power Consumption (6ch Drive, 10 % THD)
............................................................................................... 700 W
AC Outlets
2 switched outlets
G model .................................... 50 W max. total / 0.2 A max. total
1 switched outlet
B model .................................. 100 W max. total / 0.4 A max. total
Dimensions (W x H x D)
....................... 435 x 171 x 420.3 mm (17-1/8" x 6-3/4" x 16-9/16")
Weight
......................................................................... 11 kg (24 lbs. 4 oz.)
Finish
Black color ................................................................... B, G models
Titanium color .............................................................. B, G models
Accessories
Remote Control x 1, Battery (Manganese Dry) x 2, Indoor FM
Antenna x 1, AM Loop Antenna x 1, Indoor DAB Antenna x 1,
Antenna Adapter x 1 (B model)
* Specifications are subject to change without notice due to product
improvements.
B .......... British model G ...... European model

RX-V100D
6
CATEGORY MAIN MENU SUB MENU SELECT MENU VALUE [INITIAL]
•BASIC SETUP ROOM : S >M L S / [M] / L
SUBWOOFER : YES [YES] / NONE
SPEAKERS : 6spk 2 / 3 / 4 / 5 / [6]
>SET CANCEL [SET] / CANCEL
CHECK OK? : YES [YES] / NO
FR •••••||•••••
C•••••||•••••
SL •••••||••••• ±10.0 dB step
SB •••••||•••••
SR •••••||•••••
SWFR •••••||•••••
•
MANUAL SETUP 1 SOUND MENU A ) SPEAKER SET FRONT : LARGE SMALL / [LARGE]
CENTER : SML
SUR LR : SML NONE / [SML] / LRG
SUR B : SML
BASS OUT : BOTH SWFR / FRONT / [BOTH]
Cross Over : 80 Hz 40 / 60 / [80] / 90 / 100 / 110 / 120 / 160 / 200 Hz
SWFR PHASE : NRM [NRM] / REV
B ) SP LEVEL FL •••••||•••••
FR •••••||•••••
C•••••||•••••
SL •••••||••••• -10.0 dB to +10.0 dB [0.0 dB] / 1.0 dB step
SR •••••||•••••
SB •••••||•••••
SWFR •••••||•••••
C ) SP DISTANCE UNIT : meters feet / [meters]
FRONT L 10.0 ft / 3.00 m
FRONT R 10.0 ft / 3.00 m
CENTER 10.0 ft / 3.00 m feet : 1.0 ft to 80.0 ft [10.0 ft] / 0.5 ft step
SUR. L 10.0 ft / 3.00 m
SUR. R 10.0 ft / 3.00 m
meters : 0.30 m to 24.00 m [3.00 m] / 0.10 m step
SUR. B 10.0 ft / 3.00 m
SWFR 10.0 ft / 3.00 m
D ) CENTER GEQ TEST : >OFF ON [OFF] / ON
100 Hz -||- 0
300 Hz -||- 0
1 kHz -||- 0 -6 dB to +6 dB [0 dB] / 1 dB step
3 kHz -||- 0
10 kHz -||- 0
E ) LFE LEVEL SP LFE : 0 -20 dB to 0 dB [0 dB] / 1 step
HP LFE : 0
F ) D . RANGE SP D . R : MAX MIN / STD / [MAX]
HP D . R : MAX
G ) AUDIO SET MUTE TYP : MUTE -20 dB / [MUTE]
A. DELAY : 0 ms 0 ms to 160 ms / 1 step
TC. BYPASS : AUTO OFF / [AUTO]
•Set Menu Table
CATEGORY MAIN MENU SUB MENU SELECT MENU VALUE [INITIAL]
2 INPUT MENU A ) I/O ASSIGN C . V [A] : DVD [DVD] / VCR / V-AUX / DTV/CBL
C . V [B] : DTV/CBL - - - / VCR / V-AUX / [DTV/CBL]
OUT (1) : MD/CD-R
[MD/CD-R] / CD / VCR / V-AUX / DTV/CBL / DVD
IN (2) : MD/CD-R
IN (3) : DVD - - - / CD / VCR / V-AUX / DTV/CBL / [DVD]
IN (4) : DTV/CBL - - - / CD / VCR / V-AUX / [DTV/CBL] / DVD
IN (5) : CD
MD/CD-R / [CD] / VCR / V-AUX / DTV/CBL / DVD
B ) INPUT MODE > AUTO / LAST [AUTO] / LAST
C ) INPUT RENAME CD
Input is possible to 8 characters
MD/CD-R Input is possible Character type
TUNER CAPITAL A to Z
DVD SMALL a to z
DTV/CBL FIGURE 0 to 9
V-AUX Space
VCR Symbol # * - + / ; < > ? etc.
3 DAB MENU A ) INIT SCAN SCAN : FULL [FULL] / UK_BAND3 / NO
B )
TUNE AID 5A LEVEL : XX [5A] ~ LW (DAB Channel Label)
C ) DRC MENU DRC MODE : AUTO [AUTO] / OFF
D ) PRUNE LIST OK : [ENTER] YES / NO
E ) PRESET DELETE DELETE : XX XX (Preset Number)
4 OPTION MENU A ) DISPLAY SET DIMMER : 0 -5 to 0 / 1 step
V CONV. : ON OFF / [ON]
B )
MEMORY GUARD MEM. GUARD : OFF [OFF] / ON
C ) PARAM. INI
D ) MULTI ZONE SP B : MAIN [MAIN] / ZONE B
•DAB FREQUENCY TABLE
Frequency Channel label
174.928 MHz 5A
176.640 MHz 5B
178.352 MHz 5C
180.064 MHz 5D
181.936 MHz 6A
183.648 MHz 6B
185.360 MHz 6C
187.072 MHz 6D
188.928 MHz 7A
190.640 MHz 7B
192.352 MHz 7C
194.064 MHz 7D
195.936 MHz 8A
197.648 MHz 8B
199.360 MHz 8C
201.072 MHz 8D
202.928 MHz 9A
204.640 MHz 9B
206.352 MHz 9C
208.064 MHz 9D
209.936 MHz 10A
211.648 MHz 10B
213.360 MHz 10C
215.072 MHz 10D
Frequency Channel label
216.928 MHz 11A
218.640 MHz 11B
220.352 MHz 11C
222.064 MHz 11D
223.936 MHz 12A
225.648 MHz 12B
227.360 MHz 12C
229.072 MHz 12D
230.784 MHz 13A
232.496 MHz 13B
234.208 MHz 13C
235.776 MHz 13D
237.488 MHz 13E
239.200 MHz 13F
Frequency Channel label
1452.960 MHz LA
1454.672 MHz LB
1456.384 MHz LC
1458.096 MHz LD
1459.808 MHz LE
1461.520 MHz LF
1463.232 MHz LG
1464.944 MHz LH
1466.656 MHz LI
1468.368 MHz LJ
1470.080 MHz LK
1471.792 MHz LL
1473.504 MHz LM
1475.216 MHz LN
1476.928 MHz LO
1478.640 MHz LP
1480.352 MHz LQ
1482.064 MHz LR
1483.776 MHz LS
1485.488 MHz LT
1487.200 MHz LU
1488.912 MHz LV
1490.624 MHz LW
Band 3 L-Band

RX-V100D
7
RX-V100D
• Changing Speaker Impedance
To change the Speaker Impedance, do the following pro-
cedure.
1 With the main unit in standby mode, hold down
“STRAIGHT (EFFECT)” key and press “STANDBY/
ON” key.
Then PRESET is displayed.
2 Press “STRAIGHT (EFFECT)” key to select the de-
sired setting.
8 ohms or 4 ohms
3 Press “STANDBY/ON” key.
The main unit changes to standby mode.
Note: The setting you made are reflected the next
time this main unit’s power is turned on.
• Resetting the factory presets
To reset all of parameters, do the following procedure.
This procedure completely resets ALL parameters, in-
cluding the SET MENU, level, assign, and tuner presets.
1 With the main unit in standby mode, hold down
“STRAIGHT (EFFECT)” key and press “STANDBY/
ON” key.
Then PRESET is displayed.
2 Turn “PROGRAM” knob to select PRESET.
3 Press “STRAIGHT (EFFECT)” key to select the de-
sired setting.
RESET To reset the main unit to its factory presets.
CANCEL To cancel without making any changes.
4 Press “STANDBY/ON” key.
If you selected RESET, the main unit is reset its fac-
tory presets and switches to standby mode.
If you selected CANCEL, the main unit switches to
standby mode and nothing is reset.
Note: The setting you made are reflected the next
time this main unit’s power is turned on.
■INTERNAL VIEW
SUBTRANS (1) P.C.B.
DAB P.C.B.
MAIN (2) P.C.B.
Tuner
SUBTRANS (4) P.C.B.
SUBTRANS (3) P.C.B.
SUBTRANS (6) P.C.B.
SUBTRANS (7) P.C.B.
SUBTRANS (9) P.C.B.
SUBTRANS (2) P.C.B.
DSP P.C.B.
MAIN (1) P.C.B.
FUNCTION P.C.B.
POWER (1) P.C.B.
MAIN (5) P.C.B.
POWER (2) P.C.B.
OPERATION (5) P.C.B.
OPERATION (1) P.C.B.
OPERATION (3) P.C.B.
OPERATION (2) P.C.B.
Power Transformer
GHIJK
A
0
B
C
D
E
F
124
357689 1
2
3
4
5
6
7
8
9
0
A
B
C
D
E
F
G
H
I
J
K
■ADVANCED SETUP

RX-V100D
8
RX-V100D
■DISASSEMBLY PROCEDURES
Fig. 1
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (1), 4 screws (2) and 1 screws (3). (Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)
2. Removal of Front Panel Unit
a. Remove 2 Knobs. (Fig. 1)
b. Remove 1 screw (4) and then remove the Support Top. (Fig. 1)
c. Remove 6 screws (5) and then remove the Front Panel Unit. (Fig. 1)
3. Removal of Plate Side
a. Remove 2 push rivets (6). (Fig. 1)
b. Remove the Plate Side L/R. (Fig. 1)
4. Removal of Sub Chassis Unit
a. Remove 2 screws (7) and then slide the Sub Chassis Unit forward. (Fig. 1)
b. Loosen the harness fixture fixing the cable.
c. Remove CB306, CB309, CB456 and CB863 and then remove the Sub Chassis Unit. (Fig. 1)
1
1
2
3
2
CB309
CB306
CB456
Top Cover
Front Panel Unit
Knob
Suport Top
CB863
Sub Chassis Unit Plate Side L
Plate Side R
4
5
5
6
6
7
7

RX-V100D
9
RX-V100D
Fig. 3
Fig. 2
5. Removal of DSP P.C.B.
a. Remove 1 screw (8). (Fig. 2)
b. Remove 7 screws (9). (Fig. 3)
c. Remove CB2 and CB11. (Fig. 2)
d. Lift up the SUBTRANS (2) P.C.B. and remove the CB1. (Fig. 2)
e. Remove the DSP P.C.B. with the Support/DSP. (Fig. 2)
8
SUBTRANS (2) P.C.B.
DSP P.C.B.
CB1
CB11
CB2
Support / DSP
900

RX-V100D
10
RX-V100D
7. Removal of MAIN (1), (5) and POWER (1), (2) P.C.B.s
a. Remove CB354. (Fig. 5)
b. Remove 2 screws (A), 1 screws (B) and 2 screws (C).
(Fig. 5)
c. Remove MAIN (1), (5) and POWER (1), (2) P.C.B.s. (Fig. 5)
Fig. 5
6. Removal of FUNCTION, SUBTRANS (2), (3), (6), (7), (9), DAB P.C.B.s and Tuner
a. Remove CB4, CB5, CB6, CB307, CB351, CB452 and CB453. (Fig. 4)
b. Remove 22 screws (0). (Fig. 3)
c. Remove FUNCTION, SUBTRANS (2), (3), (4), (6), (7), (9), DAB P.C.B.s and the Tuner. (Fig. 4)
Fig. 4
SUBTRANS (9) P.C.B.
SUBTRANS (7) P.C.B.
SUBTRANS (2) P.C.B.
SUBTRANS (6) P.C.B.
SUBTRANS (3) P.C.B.
SUBTRANS (4) P.C.B.
FUNCTION P.C.B.
Tuner
DAB P.C.B.
CB4
CB5
CB6
CB307
CB351
CB452
CB453
B
A
A
C
C
POWER (1) P.C.B.
POWER (2) P.C.B.
MAIN (5) P.C.B.
MAIN (1) P.C.B.
CB354

RX-V100D
11
RX-V100D
When checking the P.C.B.:
•Put a Cloth over the equipment. Put the MAIN (1), (5), and POWER (1), (2) P.C.B.s together with the heat sink upright
on the Cloth and check them. (Fig. 6)
•Reconnect all cables (connectors) that have been disconnected.
•When connecting the flat cable, use care for the polarity.
•The P.C.B. removed from the rear panel does not work because its grounding is loose. Be sure to connect the ground
of each P.C.B. to the chassis or GND with a jumper wire or the like.
Fig. 6
Cloth

RX-V100D
12
RX-V100D
No DIAG menu sub-menu
1 BYPASS 1. ANALOG BYPASS
2. DSP BYPASS
2 RAM THROUGH 1. RAM MARGIN
2. RAM FULL BIT
3 PRO LOGIC 1. PRO LOGIC
4 SPEAKERS SET 1. FRNT: SML 0dB
2. CENTER: NONE
3. LFE/B: FRNT
4. Pres Mix: 5ch
5. FRNT GAIN1
6. FRNT GAIN2
7. SURR B Check
5 Xch-INPUT 1. XCH INPUT_6
2. XCH INPUT_8
6 MIC CHECK MIC CHK --dB (Not applied to this model)
7 VFD CHECK 1. VFD CHECK (Initial display)
STRAIGHT 2. VFD DISP OFF (All segments OFF)
3. VFD DISP ALL (All segments ON 100%)
4. VFD DIMMER (All segments ON 50%)
5. CHECKED PATTERN (ON in lattice)
8 MANUAL TEST 1. TEST ALL
2. TEST FRNT L
3. TEST CENTER
4. TEST FRNT R
5. TEST SURR R
6. TEST SB R
7. TEST SB L
8. TEST SURR L
9. TEST PRES L
10. TEST PRES R
11. TEST LFE
9 DAB CHECK 1. DAB SCAN/SCL
2. DLS
3. SIGNAL QUALITY
10 FACTORY PRESET 1. PRESET INHI (memory initialization inhibited)
2. PRESET RSRV (memory initialized)
11 AD DATA CHECK 1. DC/PS (protection)
2. THM
3. IMP SW/POWER LIMIT
4. K0/K1 (panel key)
12 V_CONV_STATUS 1. LOW BYTE (Not applied to this model)
2. HIGH BYTE (Not applied to this model)
13 XM STATUS 1. XMS1 (Not applied to this model)
2. XMS2 (Not applied to this model)
■SELF DIAGNOSIS FUNCTION (DIAG)
This unit has self diagnosis functions that are intended for inspection, measurement and location of faulty point.
There are 21 DIAG menu items, each of which has sub-menu items.
Listed in the table below are menu items and sub-menu items.

RX-V100D
13
RX-V100D
No DIAG menu sub-menu
14 IF STATUS 1. DST
2. DMD
3. DIF
4. PC
5. CS1
6. CS2
7. DEI
8. BS1
9. BS2
10. BS3
11. BS4
12. BS5
13. BS6
14. BS7
15. BS8
16. MTT
17. DGI
15 DSP BUS CHECK 1. TI BUS
16 SWFR CUT OFF 1. LFE LPF
2. LFE HPF
17 PROTECTION 1. PS L
SETTING 2. PS H
3. DC L
4. DC H
5. TEMP
6. PL_8_M_L
7. PL_8_M_H
8. PL_8_N_L
9. PL_8_N_H
10. PL_6_M_L
11. PL_6_M_H
12. PL_6_N_L
13. PL_6_N_H
18 PROTECTION HISTORY 1. HISTORY 1
2. HISTORY 2
3. HISTORY 3
4. HISTORY 4
19 SOFT SWITCH 1. SW MODE
2. MODEL SETTING
3. DESTINATION
4. TUNER DESTINATION
5. TUNER TYPE
6. VIDEO FORMAT
7. ZONE 2
8. AAC
9. TUNER
10. ZONE 2 AMP
11. OSD
12. YPAO
20 ROM VERSION/ 1. MAIN VERSION
CHECK SUM/PORT 2. MAIN CHECK SUM ALL/PROGRAM
3. OPE/DSP/XM
4. AAC PORT
5. TI (DSP) VERSION
6. TI (DSP) SUM
7. EEPROM SUM
8. DAB MODULE VERSION
21 DSP WRITTING 1. TI BOOT
Not applied to this model

RX-V100D
14
RX-V100D
Keys of main unit
Turn on the power while pressing these keys.
• Starting DIAG
Press the “STANDBY/ON”key while simultaneously pressing those two keys of the main unit as indicated in the figure
below.
• Starting DIAG in the protection cancel mode
If the protection function works and causes hindrance to trouble diagnosis, cancel the protection function as described
below, and it will be possible to enter the DIAG mode. (The protection functions other than the excess current detect function
will be disabled.)
Press the “STANDBY/ON”key while simultaneously pressing those two keys indicated in the figure above. At this time, keep
pressing those two keys for 3 seconds or longer.
In this mode, the “SLEEP”segment of the FL display of the main unit flashes to indicate that the mode is DIAG mode with the
protection functions disabled.
CAUTION!
Using this product with the protection function disabled may cause damage to itself. Use special care for this point when
using this mode.
• Canceling DIAG
1Before canceling DIAG, execute setting for FACTORY PRESET of DIAG menu No.10 (Memory initialization inhibited or
Memory initialized).
* In order to keep the user memory stored, be sure to select PRESET INHIBITED (Memory initialization inhibited).
2Turn off the power by pressing the “STANDBY/ON”key of the main unit.

RX-V100D
15
RX-V100D
Cause: The voltage in the power supply section is abnormal.
Supplementary information: The abnormal voltage is displayed in % based on 5V as 100%.
Turning on the power without correcting the abnormality will cause the protection function to work 1 second later and the
power supply will be shut off.
When there is a history of protection
function due to an abnormal voltage in
the power supply section Version (1 alphabet)
Voltage display in %
Opening message DIAG menu display
After a few seconds
Version (1 alphabet)
When there is no history
of protection function
When there is a history of protection function:
When there is a history ofprotection
function due to excess current Version (1 alphabet)
•Display provided when DIAG started
The FL display of the main unit displays the protection function history data and the version (1 alphabet) and the DIAG menu
[sub-menu (ANALOG BYPASS) of DIAG menu No.1 BYPASS] a few seconds later.
When there is no history of protection function:
Cause: An excessive current flowed through the power amplifier.
Supplementary information: As current of the power transistor is detected, the abnormal channel can be identified by
checking the current detect transistor.
Turning on the power without correcting the abnormality will cause the protection function to work immediately and the
power supply will instantly be shut off.
Note)
•Applying the power to a unit without correcting the abnormality can be dangerous and cause additional circuit damage.
•The output transistors in each amplifier channel should be checked for damage before applying any power.
•Amplifier current should be monitored by measuring across the emitter resistors for each channel.

RX-V100D
16
RX-V100D
When there is a history of protection
function due to abnormal DC output Version (1 alphabet)
Voltage display in %
When there is a history of protection
function due to excessive heat sink
temperature
Version (1 alphabet)
Voltage display in %
Cause: DC output of the power amplifier is abnormal.
Supplementary information: The abnormal voltage is displayed in % based on 5V as 100%.
Turning on the power without correcting the abnormality will cause the protection function to work 3 seconds later and the
power supply will be shut off.
Cause: The temperature of the heat sink is excessively high.
Supplementary information: The abnormal voltage is displayed in % based on 5V as 500.
Turning on the power without correcting the abnormality will cause the protection function to work 1 second later and the
power supply will be shut off.
* Additional causes of protection can be due to loose connections, associated components, Microprocessor, etc.
* For the protection voltage value, refer to DIAG menu No.11 described later.
•Display during menu operation
During the DIAG operation, the function at work is indicated on the FL indicator. The contents displayed during the function
operation are described in the later section on details of functions.
•History of protection function
When the protection function has worked, its history is stored in memory with a backup. Even if no abnormality is noted
while servicing the unit, an abnormality which has occurred previously can be defined as long as the backup data has
been stored.
The history of the protection function is cleared when DIAG is cancelled by selecting PRESET RESERVED (Memory
initialized) of DIAG menu No.10 or when the backup data is erased.

RX-V100D
17
RX-V100D
•Functions in DIAG mode
In addition to the DIAG menu items, functions as listed below are available.
•Input selection, 6CH input
•Center/Rear/Rear Center/Sub-woofer level adjustment
•Speaker relay control of A and B
•Muting
•Power on/off
•Master volume
* Functions related to the tuner and the set menu are not available.
* It is possible to confirm Menu No.14 IF STATUS while keeping the signal process (operation status) of each DIAG menu
by using the INPUT MODE key of the main unit.
•Initial settings used to start DIAG
The following settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to those before starting DIAG.
•Master volume: -20 dB
•Input: DVD (MULTI CH INPUT OFF)
•Effect level: 0 dB
•Audio mute: OFF
•Speaker relay of A and B: ON
•Speaker setting: LARGE / BASS OUT = SWFR
•DIAG menu: BYPASS (1. ANALOG BYPASS)
•Operation procedure of DIAG menu and SUB-MENU
There are 21 MENU items, each of which has some SUB-MENU items.
DIAG menu selection
Main unit: Select the menu using the PROGRAM knob.
SUB-MENU selection
Main unit: Select the sub-menu using (Forward) and (Reverse) keys of PRESET/TUNING.
DIAG menu selection
Keys of main unit
Reverse Forward
Reverse Forward
SUB-MENU selection

RX-V100D
18
RX-V100D
DIR
LC89057
DSP
(DECODE)
(POST PROCESSING)
TI DA60Y
A/D
AK4628
DRAM
DAB
Tuner
FL / FR
C / SW
SL / SR
SBL / SBR
ROM
ANALOG BYPASS
Reference data
INPUT: DVD ANALOG
SUBWOOFER OUTPUT: 50 Hz, Others: 1 kHz
DSP BYPASS
Reference data
INPUT: DVD ANALOG
SUBWOOFER OUTPUT: 50 Hz, Others: 1 kHz
Input level
Both ch, -20 dBm
Volume
+6.0 dB
SPEAKERS OUT
FRONT L/R
+13.0 dBm
SUBWOOFER
OUTPUT
- ∞
CENTER
- ∞
SURROUND L/R
- ∞
SURROUND BACK
- ∞
Input level
Both ch, -20 dBm
Volume
+6.0 dB
SPEAKERS OUT
FRONT L/R
+13.0 dBm
SUBWOOFER
OUTPUT
- ∞
CENTER
- ∞
SURROUND L/R
- ∞
SURROUND BACK
- ∞
•Details of DIAG menu
1. BYPASS
Using the sub-menu, it is possible to select analog bypass output or DSP bypass output.
ANALOG BYPASS
(Shaded items not used in this example)
DSP BYPASS
(Shaded items not used in this example)
DIR
LC89057
DSP
(DECODE)
(POST PROCESSING)
TI DA60Y
A/D
AK4628
DRAM
FL / FR
C / SW
SL / SR
SBL / SBR
ROM
DAB
Tuner

RX-V100D
19
RX-V100D
2. RAM THROUGH
Using the sub-menu, it is possible to select margin output or full-bit output.
RAM MARGIN
Following head margin is reserved.
Reference data
INPUT: DVD ANALOG
SUBWOOFER OUTPUT: 50 Hz, Others: 1 kHz
(Shaded items not used in this example)
RAM FULL BIT
No head margin is reserved except SW.
Reference data
INPUT: DVD ANALOG
SUBWOOFER OUTPUT: 50 Hz, Others: 1 kHz
Input level
Both ch, -20 dBm
Volume
+6.0 dB
SPEAKERS OUT
FRONT L/R
+13.0 dBm
SUBWOOFER
OUTPUT
+0.5 dBm
CENTER
+13.0 dBm
SURROUND L/R
+13.0 dBm
SURROUND BACK
+13.0 dBm
Input level
Both ch, -20 dBm
Volume
+6.0 dB
SPEAKERS OUT
FRONT L/R
+13.0 dBm
SUBWOOFER
OUTPUT
+0.5 dBm
CENTER
+13.0 dBm
SURROUND L/R
+13.0 dBm
SURROUND BACK
+13.0 dBm
FRONT
+15.0 dB
CENTER
+14.0 dB
SURROUND
+9.0 dB
SURROUND BACK
+8.0 dB
SUBWOOFER
+18.0 dB
FRONT
0 dB
CENTER
0 dB
SURROUND
0 dB
SURROUND BACK
0 dB
SUBWOOFER
+18 dB
When input source is stereo, signal is assigned as below.
Front L →Center / Surround L / Surround Back L, R / Presence L
Front R →Surround R / Presence R
Front L +10 dB →SWFR
DIR
LC89057
DSP
(DECODE)
(POST PROCESSING)
TI DA60Y
A/D
AK4628
DRAM
FL / FR
C / SW
SL / SR
SBL / SBR
ROM
DAB
Tuner

RX-V100D
20
RX-V100D
3. PRO LOGIC
Dolby PRO LOGIC is applied to input stereo source.
Reference data
INPUT: DVD ANALOG
SUBWOOFER OUTPUT: 50 Hz, Others: 1 kHz
(Shaded items not used in this example)
Input level
Each ch, -20 dBm
Both ch, -20 dBm
Volume
+6.0 dB
+6.0 dB
SPEAKERS OUT
FRONT L/R
+13.0 dBm
- ∞
SUBWOOFER
OUTPUT
- ∞
- ∞
CENTER
- ∞
+13.0 dBm
SURROUND L/R
- ∞
- ∞
SURROUND BACK
- ∞
- ∞
DIR
LC89057
DSP
(DECODE)
(POST PROCESSING)
TI DA60Y
A/D
AK4628
DRAM
FL / FR
C / SW
SL / SR
SBL / SBR
ROM
DAB
Tuner