Yamaha YST-SW215 User manual

IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA
Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry,
and more specifically YAMAHA Products, are already known and
understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety
procedures when servicing this product may result in
personal injury, destruction of expensive components,
and failure of the product to perform as specified. For
these reasons, we advise all YAMAHA product owners
that any service required should be performed by an
authorized YAMAHA Retailer or the appointed service
representative.
IMPORTANT: The presentation or sale of this manual to any individual
or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or
establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s)
indicated on the cover. The research, engineering, and service departments
of YAMAHA are continually striving to improve YAMAHA products.
Modifications are, therefore, inevitable and specifications are subject to
change without notice or obligation to retrofit. Should any discrepancy
appear to exist, please contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components.
Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in
the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part
replacement. Recheck all work before you apply power
to the unit.
■CONTENTS
TO SERVICE PERSONNEL .......................................... 2
INTERNAL VIEW ........................................................... 2
SPECIFICATIONS / 参考仕様 ........................................ 3
REAR PANELS .......................................................... 3~4
DISASSEMBLY PROCEDURES/分解手順 ............. 5~6
CONFIRMATION OF AUTO STANDBY OPERATION /
AUTOSTANDBY動作確認 ............................................ 7
BLOCK DIAGRAM......................................................... 8
PRINTED CIRCUIT BOARD .................................... 9~10
SCHEMATIC DIAGRAM .............................................. 11
PARTS LIST........................................................... 13~20
YST-SW215
100854
P.O.Box 1, Hamamatsu, Japan
SERVICE MANUAL
SUBWOOFER SYSTEM
YST-SW215
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
2
YST-SW215
WALL
OUTLET EQUIPMENT UNDER TEST
AC LEAKAGE
TESTER OR
EQUIVALENT
INSULATING
TABLE
■TO SERVICE PERSONNEL
1. Critical Components Information
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
●Meter impedance should be equivalent to 1500 ohm shunted
by 0.15µF.
■INTERNAL VIEW
“CAUTION”
“F1: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 4A, 125V FUSE.”
CAUTION
F1: REPLACE WITH SAME TYPE 4A, 125V FUSE.
ATTENTION
F1: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 4A, 125V.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and /or plastic
(where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency
(and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
●Leakage current must not exceed 0.5mA.
●Be sure to test for leakage with the AC plug in both polarities.
1
1MAIN (8) P.C.B.
2MAIN (4) P.C.B.
3MAIN (1) P.C.B.
4MAIN (3) P.C.B.
5MAIN (2) P.C.B.
6POWER TRANSFORMER
7MAIN (7) P.C.B.
8MAIN (6) P.C.B.
9MAIN (5) P.C.B.
2
67 9
45
3
8
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
3
YST-SW215
■SPECIFICATIONS / 参考仕様
Type / 型式 ................. Advanced Yamaha Active Servo Technology
Output Power / 出力 .................... 120 W (100 Hz, 5 Ω, 10% T.H.D.)
Input Sensitivity / 入力感度
INPUT1 (SP) ...............................1 V (50 Hz, 120 W / 5 Ω, L + R)
INPUT2 (PJ)...........................50 mV (50 Hz, 120 W / 5 Ω, L + R)
Input Impedance / 入力インピーダンス
INPUT1 (SP) ....................................................................... 2.2 kΩ
INPUT2 (PJ)......................................................................... 12 kΩ
Frequency Response / 再生周波数帯域 ................. 28 Hz to 200 Hz
Driver / スピーカーユニット ........ 8" (20 cm) cone, Magnetic Shielding Type
Input Section / 入力部
INPUT1.............................................................. Speaker Terminal
INPUT2.................................................................... RCA Pin Jack
Operation Section / 操作部
Front Panel....... STANDBY/ON Switch, B.A.S.S. Switch, Volume
Control, High Cut Control, LED Indicator
Rear Panel .......Power Switch, Auto Standby Switch (HIGH /
LOW / OFF), Phase Switch (NORM / REV),
Voltage Selector (R, T, K models only)
Power Supply / 電源
U, C models ........................................................AC 120 V, 60 Hz
A model ...............................................................AC 240 V, 50 Hz
B, G models ........................................................AC 230 V, 50 Hz
R, T, K models ...................AC 240 / 220 / 120 / 110 V, 50/60 Hz
J model.......................................................... AC 100 V, 50/60 Hz
Power Consumption / 消費電力
U, C, A, B, G, R, T, K models ............................................... 95 W
J model.................................................................................. 70 W
Standby Power Consumption / 待機時消費電力 ................... 0.5 W
Dimensions / 外形寸法 (W x H x D) .................290 x 360 x 322 mm
(11-7/16" x 14-3/16" x 12-11/16")
Weight / 質量 .................................................. 11.5 kg (25 lbs. 6 oz.)
Finish
Cherry Color............................... U, C, A, B, G, R, T, K, J models
Black Color...................................... U, C, A, B, G, R, T, J models
Accessories / 付属品
Subwoofer Cable (3 m) x 1 (J model), Speaker cable (4 m) x 2 (J
model), Nonskid Pad x 4
* Specifications are subject to change without notice due to product
improvements.
※ 参考仕様および外観は予告なく変更されることがあります。
U .......... U.S.A. model C ...... Canadian model
A .......... Australian model B ...... British model
G .......... European model R ...... General model
T .......... Chinese model K ...... Korean model
J........... Japanese model
• DIMENSIONS/寸法図
■REAR PANELS
A modelU, C models
290(11-7/16") 322(12-11/16")
295(11-5/8") 27
(1-1/16")
290(11-7/16")
70
(2-3/4") 360(14-3/16")
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
4
YST-SW215
B, G models
T model
J model
K model
R model
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
5
YST-SW215
■DISASSEMBLY PROCEDURES/分解手順
（番号順に部品を取り外してください。）
AC電源コンセントから、電源コードを抜いてください。
1. スピーカーユニットの外し方
a. ①のネジ4本を外し、ベースを取り外します。（Fig.1）
b. ②のネジ4本を外し、スピーカーユニットを取り外しま
す。（Fig.1）
c. スピーカーユニットの端子に接続されているコネクター
を外します。（Fig.1）
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Driver
a. Remove 4 screws (1) and then remove the Base. (Fig. 1)
b. Remove 4 screws (2) and then remove the Driver.
(Fig. 1)
c. Disconnect the connector connected to the terminal of
the Driver. (Fig. 1)
Fig. 2
Fig. 1
2. フロントパネルAss'yの外し方
a. ③のネジ4本を外します。（Fig.2）
※ 取り外しには六角レンチ（2.5mm）を使用します。
b. フロントパネルAss'yを引き出し、CB4を外します。
（Fig.2）
2. Removal of Front Panel Ass'y
a. Remove 4 screws (3). (Fig. 2)
* Use an Allen wrench (2.5mm) to unscrew the Front
Panel Ass'y.
b. Pull out the front panel ass'y and remove CB4. (Fig. 2)
Speaker Unit
スピーカーユニット
2
2
Base
ベース
1
1
Connector
コネクター
CB4
Front panel Ass'y
フロントパネルAss'y
3
3
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
6
YST-SW215
Fig. 3
3. リアパネルAss'yの外し方
a. ④のネジ8本を外します。（Fig.3）
※ 取り外す④のネジには矢印（）が印刷されています。
b. リアパネルAss'yを引き出します。（Fig.3）
c. ⑤のネジ2本を外します。（Fig.3）
※ 取り外す⑤のネジには矢印（）が印刷されています。
d. リアカバーを外します。（Fig.3）
3. Removal of Rear Panel Ass'y
a. Remove 8 screws (4). (Fig. 3)
* Screws (4) are identified with arrow marks ( ).
b. Pull out the rear panel ass'y. (Fig. 3)
a. Remove 2 screws (5). (Fig. 3)
* Screws (5) are identified with arrow marks ( ).
b. Remove the rear cover. (Fig. 3)
When Checking the P.C.B.:
•Connect all the connectors removed during
disassembly back to the original positions.
•Spread cloth first and place the rear panel ass'y
on it. (Fig. 4)
P.C.B.チェックをする場合には
・ 分解の際に外したコネクターをすべて元通りに接続
します。
・ ゴムシートと布を敷き、その上にリアパネルAss'y
を置いてチェックします。（Fig.4）
Fig. 4
4
5
5
4
RearpanelAss'y
リヤパネルAss'y
RearCover
リヤカバー
Rubber sheet and cloth
ゴムシートと布
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
7
YST-SW215
●設定
1）リアパネルにある主電源スイッチをOFFにします。
2）動作確認時間を短縮するため、MAINP.C.B.（3）にある
R252の両端に10kΩの抵抗を取り付けます。
3）信号発生器の出力信号を本機の入力2端子に接続しま
す。
4）信号発生器を正弦波、100Hz、8mVに設定します。
5）リアパネルにある主電源スイッチをONにします。
●確認
1）オートスタンバイ／感度スイッチを「低」に合わせます。
2）STANDBY/ONスイッチをONにします。
表示LEDが点灯（緑色）します。5〜10秒後、表示LEDが
赤色に変わります。
3）STANDBY/ONスイッチをOFFにします。
表示LEDが消灯します。
4）オートスタンバイ／感度スイッチを「高」に合わせます。
5）STANDBY/ONスイッチをONにします。
表示LEDが点灯（緑色）します。時間が経過しても表示
LEDの色は変化しません。
6）STANDBY/ONスイッチをOFFにします。
表示LEDが消灯します。
●確認終了後
1）リアパネルにある主電源スイッチをOFFにします。
2）R252両端に取り付けた抵抗を外します。
Setting
1) Turn off the power switch located on the rear panel.
2) In order to shorten the time required for operation
check; connect a 10 kΩresistor at both ends of R252
on the MAIN P.C.B. (3).
3) Connect the output signal from the signal generator to
the L / MONO terminal of the unit.
4) Set the signal generator for the sine wave of 100 Hz, 8
mV.
5) Turn on the power switch located on the rear panel.
Confirmation
1) Set the AUTO STANDBY switch to the LOW position.
2) Turn on the STANDBY/ON switch.
The display LED lights up (green) and its color changes
to red after 5 to 10 seconds.
3) Turn off the STANDBY/ON switch.
The display LED goes off.
4) Set the AUTO STANDBY switch to the HIGH position.
5) Turn on the STANDBY/ON switch.
The display LED lights up (green) and its color remains
unchanged even after time have elapsed.
6) Turn off the STANDBY/ON switch.
The display LED goes off.
After Confirmation
1) Turn off the power switch located on the rear panel.
2) Disconnect the 10 kΩresistor connected to both ends
of R252.
■ CONFIRMATION OF AUTO STANDBY OPERATION /AUTOSTANDBY動作確認
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

YST-SW215
8
YST-SW215
■BLOCK DIAGRAM
IC3
Q1, 2
REGULATOR
POWER SUPPLY
D1
SUB
POWER SUPPLY
D203
Q209
T1
T2
D202
D12
Q206
D9
+15
+B
-15
-B
Q9
Q10
RY2
F1
PROTECTION
0.1
DRIVER
RY1
3
IC1
MUSIC
SENSOR
IC4
TIMER
IC201
+
8
4
6
7
3
AUTO
STANDBY
SW2
HAUTO POWER ON/OFF CIRCUIT
Q5, 6, 7, 8
D4, 5, 22, 23
Q205
R252
C227
POWER
AMP
1
OFF
L
IC202
REGULATOR
STANDBY/ON
SW4
Q207, 208
D204
REGULATOR
(R, T, K models only)
POWER
SW5
A.N.I.C
IC2, Q16
L.P.F
6dB/oct
1
12
Q21, 22
D24
IC11A IC11B IC7A
VR1
VOLUME
L.P.F.
6dB/oct
B.P.F.
Q201—204
L.P.F.
12dB/oct
361 58IC7B
42
2
HIGH CUT
VR2
L
R
+
–
–
+
INPUT 1
L
R
INPUT 2
L
R
+
–
–
+
OUTPUT
IC10A
787 6
SW1
PHASE
SELECT
IC10B
L.P.F.
12dB/oct
42
BASS
SELECT
SW3
H.P.F.
12dB/oct
+++
6
LIMITER
H
OFF
L
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

ABCDEFGH I J
1
2
3
4
5
6
7
YST-SW215
9
PHASE
REVNORMHIGHOFFLOW
INPUT2
INPUT1/OUTPUT
LR AUTO
STANDBY
VOLUME HIGH CUT B.A.S.S. STANDBY/ON
MAIN (3)P.C.B. MAIN (1)P.C.B.
MAIN (4)P.C.B. MAIN (8)P.C.B.
DRIVER
MAIN (2) P.C.B.
VCC +V1 E
TOVL E MAIN BASS +V2 +15 -15 PWS VCC
+V1 PWS MA1 E TOVL BASS +15 -15 LIM MA2
+V1 PWS MA1 E TOVL BASS +15 -15 LIM MA2
+–
LEDG E1 LEDR
LEDG E1 LEDR
RE
RE
BL
MAIN (6) P.C.B.
■PRINTED CIRCUIT BOARD (Foil side)
Ref. No. Location
D1 J3
D2 I4
D3 J4
D4 F3
D5 F3
D6 H3
D7 F3
D9 H4
D12 I6
D19 H3
D20 G3
D21 G3
D22 F4
D23 F4
D24 J3
D202 H6
IC1 H2
IC2 H4
IC3 H4
IC4 D5
IC7 F6
IC10 C3
IC11 D5
IC201 D4
Q1 G3
Q2 G3
Q5 F4
Q6 F4
Q7 F3
Q8 G3
Q9 I4
Q10 J4
Q16 G4
Q21 H4
Q22 H4
Q201 D2
Q202 D3
Q203 D2
Q204 D2
Q205 C4
Q206 H6
• Semiconductor Location
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

2
ABCDEFGH I J
1
3
4
5
7
YST-SW215
6
10
POWER
VOLTAGE
SELECTOR
MAIN (2)P.C.B.
MAIN (7)P.C.B.
MAIN (7)P.C.B.
MAIN (6)P.C.B. MAIN (6)P.C.B.
MAIN (9)P.C.B.
MAIN (5)P.C.B.
MAIN (1) P.C.B.
MAIN (1) P.C.B.
J, U, C, A, B, G models R, T, K models
AC
VCC +V1 E
OR
WH
WH
BE
BE
RE REBL
BEWH RE
RE
BL
BL
YE
YE
BR
BR
GR
GR
BE
BE
OR
GY
GY
MAIN (1) P.C.B.
RE REBL
■PRINTED CIRCUIT BOARD (Foil side)
• Semiconductor Location
Ref. No. Location
D203 B3
D204 A3
D205 B3
IC202 A2
Q207 A3
Q208 A3
Q209 A3
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com