YARDART Williamsburg FT-133 User manual

F
T
-
133
WilliamsburgPineapple
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
May11, 2018
PumpKitParts List
PK140 pump (1)
#7 stopper(1)
Approx.6”length of1/2”BlackNon-kinktubing (1)**
Approx.1”length of5/8”clearvinyltubing (1)**
Approx.1”length of1/2"CPVCpipe (1)**
Wedges(2)
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately5gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible with#7 Refill Device
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

F
T
-
133
WilliamsburgPineapple
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
May11, 2018
Assembleyourfountain onalevelsurface capableofholdingaminimumof315poundswith
anapproximate1square foot footprint.
FT-132G(135 lbs)
12.75”Wx25.75”H
FT-132F(111 lbs)
30”Wx8.5”H
FT-133B(8lbs)
9”Wx5.75”H
FT-133A(17 lbs)
7”Wx9.75”H
FT-133C(1lb)
5”Lx1.25”Wx4”H
1. Place thebase(FT-132G)intopositionwhere thefountainwillbe
installed, ensuringthatitislevel.
2. Center thelargebowl (FT-132F) on thebase(FT-132G)
3. Assemblethepumpkit
a. NOTE: All pumpscomewith multipleadapters
i. This fountainusesthe largestadapter provided.
b. Using ahoseclamp, attachthe1/2"end non-kink endofthe
tubingassemblyto thepumpoutlet.
c. Place thestopper aroundthepumpcordapproximately8”
fromthepump.
4. Feedthepumpcordthrough theholeinthelargebowl(FT-132F)
andthrough thebase(FT-132G).
5. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer works
besttopress thestopper inplace.
6. Place thepumpcover(FT-133B) over thepumpandinthecenter
ofthelargebowl(FT-132F).
7. InserttheCPVCendofthetubingassembly intotheCPVC
couplingprotrudingfromthebottomofthefinial(FT-133A).
8. Center thefinial(FT-133A)onthepumpcover (FT-133B).
a. Note: Rotatingthe finialasitislowered intoposition
will helptoensure thatthe tubingdoesnotget pinched.
9. Fit thepumpcover door(FT-133C) intothepumpcover (FT-
133B).
10. Fillthefountainwithwater.