Yeacomm YF-P21 User manual

Yeacomm YF-P21 User Manual
Thanks for choosing Yeacomm P21 4G wireless router, please read
and keep the user manual carefully.
1、Main Technology Parameters
●Working temps : -25℃-- +65℃
●Relative humidity: 5%--95%
●Working frequency : FDD-LTE: B1/2/3/5/7/8/28
TDD-LTE: B38/39/40/41
●Power supply : input AC :100V~240V，50Hz~60Hz
Output DC: 12V, 1000mA
●Size:185mm*175mm*78mm
●Weight: 250g
●Rate of uplink and downlink :LTE(Cat 4): 150Mbps/DL；
50Mbps/UL
2、Product Interface and Indicator
2.1 Product diagram
2.2 Product interface
⑴Phone Port ⑵Battery
⑶LAN Port ⑷USB
⑸DC Power ⑹Power Switch
⑺WLAN ON/OFF Switch ⑻Reset Button
⑼WPS Button ⑽External ANT interface
⑾SIM Card
2.3 Indicator
Type
Status
Description
SIG
All off
no signal (the signal status can be checked by terminal
configuration page)
One
The signal is poor
Two
Signal is moderate
Three
Signal is good
All on
Signal is very good
TEL
Off
Phone is not used
On
Dialing or making call
WPS
Flicker
Press WPS key for 4 seconds, then release, the WPS
lights will be flashing. If device has been connected,
WPS light will be off. If device is always not
connected ,the light will just flashing 2min ,then to go
out
WLAN
ON
WIFI is opened and has data transmission
Off
WIFI unopened
4G/LTE
Blue
Connected the internet
Yellow
not connected or trying to connect SIM
Battery
indicator
Off
No battery
Blue
Battery is charging or sufficient charge
yellow
Battery low
Adapter
indicator
Off
Battery power supply
Blue
Adapter power supply
POWER
Blue On
Power normal, the router power on
Blue Off
Power abnormal, the router power off
3、Quickly Config Guide
The router support standard RJ45 cable or WLAN wireless way
to connect computer, Support Windows XP, Windows 7,Windows
8,MAC OS, Linux, Android and so on.
First Step：
(1) Take out the device, insert the SIM card according to the
instructions, and then use the matching power adapter to supply power
to the devices.
(2) Make the computer obtain IP address automatically, once the
computer get IP, input CPE IP address into the browser, press“enter”
to access CPE home page, click“login”in upper right corner to access
login page. You can get CPE default IP address、username and
password from the nameplate attached at back cover.
Second step：
Go to the “Quick Settings”
(1) SSID configuration, the user can customize the SSID, easy to use
and memory.

(2) WiFi password settings, the user can customize the WiFi encryption
mode, and set their own password to prevent others from stealing the
traffic and to protect the security of the account.
(3) Preview the contents of the config, make sure it is correct and click
“apply”.
4、Package Contents
1 x P21 Router 1 x Power Adaptor
1 x LAN Port Cable(RJ45) 1 x P21 User Manual
5、Precautions
(1) When you remove and insert the SIM card ,please ensure the
device without power.
(2) Do not use the equipment in case of lightning weather and
unplug the external antenna and power adapter.
(3) If the device working fine, you’d better not change the
parameter or other function, if you changed it and cannot access
Internet or have poor experience, please press and hold the reset
button for more than 7 seconds to restore the factory settings.
6、Common faults and treatment methods
Common faults
Treatment methods
The device is powered on
but the front panel power
light is off.
Check the line connection is correct,
the outlet is energized, the power
adapter is consistent with the
nameplate power supply.
The power light is normal
and the battery light is
yellow, and the system does
not operate properly.
Battery power is too low, can not
meet the equipment power supply,
then please plug in external power.
Computer local connection
is not displayed, can not
successfully PING IP
address of the device, can
not open the WEB page.
Check if the computer's network card
is up and the computer has obtained
the IP address. The computer is best
set to automatically obtain IP (DHCP
need to open the device, the default is
open), if it is manually set, make sure
that the set IP address and the device
in the same network segment.
The device is working but
can not access the internet
through the web
Set the computer to automatically
obtain the IP address and DNS server
address.
Change admin page login
password or SSID
password, but forget
password
Long press the reset button for more
than 7 seconds to restore the factory
settings, and then from the rear body
nameplate for relevant information.
7.Customer Service
Xiamen Yifan Communication Technology Co.,Ltd
Hotline: [phone]
Fax: [phone]
Email: [email protected]
Head Office
8F, No. 2 of ChengYi North Street, Software Park, Jimei, Xiamen,
China
wwwyifanwireless.com